Microsoft 70-741 Online Practice Questions and Exam Preparation

Microsoft 70-741 Online Questions & Answers

• Question 91:

  You have servers named Server1 and DHCP1. Both servers run Windows Server 2016. DHCP1 contains an IPv4 scope named Scope1.

  You have 1,000 client computers.

  You need to configure Server1 to lease IP addresses for Scope1. The solution must ensure that Server1 is used to respond to up to 30 percent of the DHCP client requests only.

  You install the DHCP Server server role on Server1.

  What should you do next?

  A. From the DHCP console, run the Configure Failover wizard.
  B. From Server Manager, install the Network Load Balancing feature.
  C. From Server Manager, install the Failover Clustering feature.
  D. From the DHCP console, create a superscope.
  A. From the DHCP console, run the Configure Failover wizard.

• Question 92:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Refer to exhibit:

  

  Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private VM2 has two network adapters.

  You need to ensure that VM1 connects to the corporate network by using NAT.

  Solution: You connect VM2 to private1 and External1. You install the Remote Access Serverrole on VM2, and you configure NAT in the Routing and Remote Access console. You configure VM1 to use VM2 as the default gateway.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

• Question 93:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questionsin this series. Information and details provided in a question apply only to that question.

  Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server2 that runs Windows Server 2016.

  The DHCP Server server role is installed on Server2. The DNS server role is installed on a server named Server3.

  The network contains 500 non-Windows devices that are registered in the DNS zone of contoso.com.

  You configure Server2 to lease IP addresses to the non-Windows devices.

  You need to prevent Server2 from overwriting the host (A) records for the non-Windows devices.

  What should you run?

  A. dns.exe
  B. dnscmd.exe
  C. netsh.exe
  D. Set-DhcpServerDatabase
  E. Set-DhcpServerv4DnsSetting
  F. Set-DhcpServerv6DnsSetting
  G. Set-DNSServerSetting
  B. dnscmd.exe

• Question 94:

  You have a server named Server1 that runs Windows Server 2016. You install the Hyper-V server role on Server1. Server1 has eight network adapters that are dedicated to virtual machines. The network adapters are Remote Direct Memory

  Access (RDMA)-enabled.

  You plan to use Software Defined Networking (SDN). You will host the virtual machines for multiple tenants on the Hyper-V host.

  You need to ensure that the network connections for the virtual machines are resilient if one or more physical network adapters fail.

  What should you implement?

  A. single root I/O virtualization (SR-IOV)
  B. NIC Teaming on the Hyper-V host
  C. virtual Receive-side Scaling (vRSS)
  D. Switch Embedded Teaming (SET)
  D. Switch Embedded Teaming (SET)

• Question 95:

  Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \\contoso.com\namespace1.

  The domain contains a file server named Server1 that runs Windows Server 2016.

  You create a folder named Folder1 on Server1.

  You need to use Folder1 as a target for Namespace1.

  Which two cmdlets should you use? Each correct answer presents part of the solution.

  NOTE: Each correct selection is worth one point.

  A. New-DfsnFolderTarget
  B. Install-WindowsFeature
  C. Grant-DfsnAccess
  D. New-DfsnFolder
  E. New-SmbShare
  A. New-DfsnFolderTarget
  C. Grant-DfsnAccess

• Question 96:

  Software Defined Networking (SDN) provides a method to centrally configure and manage physical and virtual network devices such as routers, switches, and gateways in your datacenter. Virtual network elements such as Hyper-V Virtual Switch, Hyper-V Network Virtualization, and RAS Gateway are designed to be integral elements of your SDN infrastructure. Software defined networking provides which of the following capabilities?

  A. The ability to abstract your applications and workloads from the underlying physical network, which is accomplished by virtualizing the network.
  B. The ability to implement network policies in a consistent manner at scale, even as you deploy new workloads or move workloads across virtual or physical networks.
  C. The ability to centrally define and control policies that govern both physical and virtual networks, including traffic flow between these two network types.
  D. All of these
  D. All of these

• Question 97:

  You company has a main office in London. The company has 1,000 users who are located in many countries.

  You plan to deploy a large remote access solution for the company.

  The London office has three servers named Server1, Server2, and Server3 that run Windows Server 2016. You plan to use Server1 as a VPN server, Server2 as a RADIUS proxy, and Server3 as a RADIUS server.

  You need to configure Server2 to support the planned deployment.

  Which three actions should you perform on Server2? Each correct answer presents part of the solution.

  A. Create a connection request policy.
  B. Deploy a Windows container.
  C. Add a RADIUS client.
  D. Create a network policy.
  E. Create a remote RADIUS server group.
  A. Create a connection request policy.
  C. Add a RADIUS client.
  E. Create a remote RADIUS server group.

• Question 98:

  HOTSPOT

  You have a main office and three branch offices that connect by using a WAN link.

  You have servers that run Windows Server 2016 and client computers that run Windows 10 Enterprise.

  You plan to configure BranchCache so that clients in the branch office use a server on their local network to retrieve cached content from the servers in the main office.

  You plan to use Active Directory for the client computers to locate the hosted cache servers.

  You need to configure the client computers to automatically locate a hosted cache server from Active Directory.

  Which two settings should you configure? To answer, select the appropriate settings in the answer area.

  NOTE: Each correct selection is worth one point.

  Hot Area:

  

  

• Question 99:

  You are deploying Software Defined Networking (SDN) by using Windows Server 2016.

  You plan to deploy a three-node Network Controller cluster. You plan to use virtual machines for the network controller and the management client. The virtual machines will NOT be domain-joined.

  You need to configure authentication for the cluster.

  Which command should you run?

  A. Install-NetworkController –Node @{Node1, Node2, Node3} –ClientAuthentication X509
  B. Install-NetworkControllerCluster –Node @{Node1, Node1, Node3} –ClientAuthentication Kerberos
  C. Install-NetworkControllerCluster –Node @{Node1, Node1, Node3} –ClientAuthentication X509
  D. Install-NetworkControllerCluster –Node @{Node1, Node1, Node3} –ClientAuthentication None
  E. Install-NetworkController –Node @{Node1, Node2, Node3} –ClientAuthentication Kerberos
  C. Install-NetworkControllerCluster –Node @{Node1, Node1, Node3} –ClientAuthentication X509

• Question 100:

  Scenario:

  You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.

  

  You install the Remote Access server role on Server2. Server2 has the following configured:

  1.

  Network address translation (NAT)

  2.

  The DHCP Server server role

  The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the Internet to Server2.

  You identify the following requirements:

  1.

  Add 28 devices to subnet2 for a temporary project.

  2.

  Configure Server2 to accept VPN connections from the Internet.

  3.

  Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.

  

  You add a computer to subnet1. The computer has an IP address of 10.10.0.129. Web1 receives a request from the new computer and sends a response. To which IP address will Web1 reply?

  A. 10.10.0.129
  B. 10.10.0.224
  C. 131.107.0.223
  D. 172.16.128.222
  C. 131.107.0.223