Microsoft 70-741 Online Practice Questions and Exam Preparation

Microsoft 70-741 Online Questions & Answers

• Question 201:

  You manage a Windows Server 2016 software-defined network.

  Network Controller is installed on a three-node domain-joined cluster of virtual machines.

  You need to add a new access control list (ACL) for the network controller to the network interface on a tenant virtual machine. The ACL will have only one rule that prevents only outbound traffic from the 10.10.10.0/24 subnet.

  You plan to run the following Windows PowerShell commands.

  $ruleproperties = new-object Microsoft.Windows.NetworkController.AclRuleProperties

  $ruleproperties.SourcePortRange = “0-65535”

  $ruleproperties.DestinationPortRange = “0-65535”

  $ruleproperties.Action = “Deny”

  $ruleproperties.Priority = “100”

  $ruleproperties.Type = “Outbound”

  $ruleproperties.Logging = “Enabled”

  Which three remaining properties should you add to the rule? Each correct answer presents part of the solution. (Choose three.)

  NOTE: Each correct selection is worth one point.

  A. $ruleproperties.SourceAddressPrefix = "10.10.10.0/24"
  B. $ruleproperties.DestinationAddressPrefix = "10.10.10.0/24"
  C. $ruleproperties.Protocol = "ALL"
  D. $ruleproperties.Protocol = "TCP"
  E. $ruleproperties.SourceAddressPrefix = "*"
  F. $ruleproperties.DestinationAddressPrefix = "*"
  A. $ruleproperties.SourceAddressPrefix = "10.10.10.0/24"
  C. $ruleproperties.Protocol = "ALL"
  F. $ruleproperties.DestinationAddressPrefix = "*"

• Question 202:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.

  Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.

  You need to ensure that domain users can establish VPN connections only between Monday and Friday.

  Solution: From Network Policy Server, you modify the Network Policies on Server1.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

• Question 203:

  You have an IP Address Management (IPAM) server named IPAM1 that runs Window Server 2016. IPAM1 manages all of the DHCP servers on your network.

  You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.

  You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.

  Solution: From Windows PowerShell, you run the Invoke-IpamServerProvisioning cmdlet.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 204:

  You have a DNS server named Server1 that runs Windows Server 2016. Server1 has an Active Directory-integrated zone named adatum.com.

  All client computers run Windows 10.

  You recently encountered unexpected responses to DNS client queries in the adatum.corn zone.

  You need to log all the records written to the zone.

  Which cmdlet should you run?

  A. Set-DnsServerDsSetting
  B. Set-DnsServerDiagnostics
  C. Set-DnsServer
  D. Add-DnaServerQueryResolutionPolicy
  B. Set-DnsServerDiagnostics

• Question 205:

  The DNS Server service provides several types of zones. Which zone helps to keep delegated zone information current, improve name resolution and simplify DNS administration, but is not an alternative for enhancing redundancy and load sharing?

  A. secondary
  B. stub
  C. none of these
  D. primary
  B. stub

• Question 206:

  You have a virtual machine named VM1 that runs windows Server 2016. VM1 hosts a service that requires high network throughput.

  VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface.

  Quality of Service (QoS), and Receive Side Scaling (RSS).

  You need to ensure that the traffic from VM1 can be processed by multiple networking processors.

  Which Windows PowerShell command should you run on the host of VM1?

  A. Set-NetAdapterRss
  B. Set-NetAdapterRdma
  C. Set-NetAdapterSriov
  D. Set-NetAdapterQos
  A. Set-NetAdapterRss

• Question 207:

  You can use Policy-based Quality of Service (QoS) to manage traffic to offer better user experiences, control bandwidth costs, or more finely negotiate service levels with bandwidth providers or business departments.

  QoS policies can define priority through a Differentiated Services Code Point (DSCP) value. The DSCP applies a value (0-63) within the Type of Service (TOS) field in an IPv4 packet's header and within the Traffic Class field in IPv6. This

  DSCP value provides classification at the Internet Protocol (IP) level, which routers can use to decide queuing behavior. You can also limit an application's outbound network traffic by specifying a throttle rate. The Wi-Fi Alliance has

  established a certification for Wireless Multimedia (WMM) that defines four access categories (WMM_AC) for prioritizing network traffic transmitted on a Wi-Fi wireless network.

  The four groups are shown below. Which group should have the highest DSCP values?

  A. Video (VI)
  B. Voice (VO)
  C. Background (BK)
  D. Best effort (BE)
  B. Voice (VO)

• Question 208:

  Your network contains an Active Directory forest named contoso.com. The functional level of the forest is Windows Server 2012.

  The forest contains five domain controllers and five VPN servers that run Windows Server 2016.

  Five hundred users connect to the VPN servers daily.

  You need to configure a new server named Server1 as a RADIUS server.

  What should you do first?

  A. On Server1, deploy the Remote Access server role.
  B. On Server1, deploy the Network Policy and Access Services role.
  C. On a domain controller, set the forest functional level to Windows Server 2016.
  D. On each VPN server, run the New-NpsRadiusClient cmdlet.
  B. On Server1, deploy the Network Policy and Access Services role.

• Question 209:

  You have a data center. The data center contains Hyper-V hosts that run Windows Server 2016.

  You plan to host virtual machines for several customers. The virtual machines will run across any Hyper-V host. The network traffic of each customer will be isolated from the traffic of other customers.

  You plan to use Software Defined Networking (SDN).

  You need to recommend how to deploy Network Controller to support the planned deployment.

  What should you include in the recommendation?

  A. On the Hyper-V hosts, deploy the Network Controller server role to a virtual machine. Run the Set-NetworkControllerNodecmdlet on the hosts.
  B. On the Hyper-V hosts, deploy the Network Controller server role. Add every virtual machine by running the New-NetworkControllerServercmdlet.
  C. On the Hyper-V hosts, deploy the Network Controller server role. Run the Set-NetworkControllerNodecmdlet on every virtual machine.
  D. On the Hyper-V hosts, deploy the Network Controller server role to a virtual machine. Add the hosts by running the New-NetworkControllerServercmdlet.
  D. On the Hyper-V hosts, deploy the Network Controller server role to a virtual machine. Add the hosts by running the New-NetworkControllerServercmdlet.

• Question 210:

  You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.

  You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named Internal and Internet. Internet connects to an Internet Service Provider (ISP) and obtains the 131.107.0.10 IP address. Internal

  connects to the internal network and is configured to use the 192.168.1.250 IP address.

  You need to provide Internet connectivity for the client computers.

  What should you do?

  A. On Server2, select the Internet and Internal network adapters and bridge the connections. From the DHCP console on Server1, authorize Server2.
  B. On Server1, stop the DHCP server. On the Internal network adapter on Server2, enable Internet Connection Sharing (ICS).
  C. On Server2 run the New-NetNat –Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 131.107.0.10.
  D. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.
  E. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 131.107.0.10.
  F. Recreate the DHCP scope on Server1 to lease addresses from the 131.107.0.0/24 address space. On Server2, change the IP address of the internal network adapter to 131.107.0.1. Configure Server1 to provide the 003 Router option of 131.107.0.1.
  D. Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.