Microsoft 70-741 Online Practice Questions and Exam Preparation

Microsoft 70-741 Online Questions & Answers

• Question 121:

  You have a DHCP server named Server1 that runs Windows Server 2016.

  You plan to implement IPv6 on your network.

  You need to configure Server1 for stateless DHCPv6.

  What should you do from the DHCP console?

  A. Configure the Advanced Properties for Server1
  B. Configure the IPv6 Server Options
  C. Create an IPv6 scope
  D. Configure the General IPv6 Properties
  B. Configure the IPv6 Server Options

• Question 122:

  You have multiple servers that run Windows Server 2016.

  The DNS Server server role is installed on a server named Server1.

  You need to configure Server1 to use a DNS forwarder that has an IP address of 192.168.10.15.

  What should you run?

  A. dism.exe
  B. dns.exe
  C. dnscmd.exe
  D. netsh.exe
  E. Set-DhcpServerDatabase
  F. Set-DhcpServerv4DnsSetting
  G. Set-DhcpServerv6DnsSetting
  H. Set-DNSServerSetting
  C. dnscmd.exe

• Question 123:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.

  Information and details provided in a question apply only to that question.

  You have 2000 devices. One hundred of the devices are mobile devices that have physical addresses beginning with 98-5F.

  You have a DHCP server named Server1.

  You need to ensure that the mobile devices register their host name by using a DNS suffix of mobile.contoso.com.

  What should you do on Server1?

  A. From the properties of Scope1, modify the Conflict detection attempts setting.
  B. From the properties of Scope1, configure Name Protection.
  C. From the properties of IPv4, configure the bindings.
  D. From IPv4, create a new filter.
  E. From the properties of Scope1, create an exclusion range.
  F. From IPv4, run the DHCP Policy Configuration Wizard.
  G. From Control Panel, modify the properties of Ethernet.
  H. From Scope1, create a reservation.
  F. From IPv4, run the DHCP Policy Configuration Wizard.

• Question 124:

  You have a server named Server1 that runs Windows Server 2016.

  Server1 will be used as a VPN server.

  You need to configure Server1 to support VPN Reconnect.

  Which VPN protocol should you use?

  A. IKEv2
  B. L2TP
  C. PPTP
  D. SSTP
  A. IKEv2

• Question 125:

  Your network contains multiple wireless access points (WAPs) that use WPA2-Personal authentication. The network contains an enterprise root certification authority (CA).

  The security administrator at your company plans to implement WPA2-Enterprise authentication on the WAPs.

  To support the authentication change, you deploy a server that has Network Policy Server (NPS) installed.

  You need to configure NPS to authenticate the wireless clients.

  What should you do on the NPS server?

  A. Add RADIUS clients and configure network policies.
  B. Create a remote RADIUS server group and configure connection request policies.
  C. Create a remote RADIUS server group and install a server certificate.
  D. Add RADIUS clients and configure connection request policies.
  A. Add RADIUS clients and configure network policies.

• Question 126:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

  On Server1, you have the following zone configuration.

  

  You have the following subnets defined on Server1.

  

  You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.

  Solution: From a Group Policy object (GPO) in the domain, you modify the Network List Manager Policies.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 127:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

  Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

  On Server1, you have the following zone configuration.

  

  You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.

  Solution: From a Group Policy object (GPO) in the domain, you modify the Network List Manager Policies. Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 128:

  HOTSPOT

  You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has two network adaptors named NIC1 and NIC2. Server1 has two virtual switches named vSwitch1 and vSwitch2. NIC1 connects to vSwitch1. NIC2 connects to vSwitch2.

  Server1 hosts a virtual machine named VM1. VM1 has two network adapters named vmNIC1 and vmNIC2. VmNIC1 connects to vSwitch1. VmNIC2 connects to vSwitch2.

  You need to create a NIC team on VM1.

  What should you run on VM1? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  Hot Area:

  

  

• Question 129:

  HOTSPOT

  Your network contains an Active Directory domain. The network contains three sunbtes as shown in the following table.

  

  The domain contains the DHCP server shown in the following table. The DHCP server have the DHCP scopes shown in the following table.

  For each of the following statements, select Yes if the statement is true Otherwise, select No.

  Hot Area:

  

  

• Question 130:

  Your network contains an Active Directory domain. The domain contains two domain controllers named DC1 and DC2. DC1 and DC2 host an Active Directory-integrated DNS zone named contoso.com.

  You have two DNS Client Subnets named Subnet1 and Subnet2.

  You plan to create two DNS records for www.contoso.com. One record will point to 10.1.2.3, and the other record will point to 172.23.6.5.

  You need to ensure that www.contoso.com resolves to:

  1.

  10.1.2.3 from Subnet1

  2.

  172.23.6.5 from Subnet2 What should you create?

  A. One DNS recursion policy, two DNS zone delegations, and the DNS records
  B. One DNS zone scope, two DNS query resolution policies, and the DNS records
  C. One DNS query resolution policy, two DNS zone delegations, and the DNS records
  D. Two DNS zone scopes, two DNS query resolution policies, and the DNS records
  D. Two DNS zone scopes, two DNS query resolution policies, and the DNS records