Microsoft 70-741 Online Practice Questions and Exam Preparation

Microsoft 70-741 Online Questions & Answers

• Question 141:

  Scenario:

  You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.

  

  You install the Remote Access server role on Server2. Server2 has the following configured:

  1.

  Network address translation (NAT)

  2.

  The DHCP Server server role

  The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the Internet to Server2.

  You identify the following requirements:

  1.

  Add 28 devices to subnet2 for a temporary project.

  2.

  Configure Server2 to accept VPN connections from the Internet.

  3.

  Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.

  

  What should you do to meet the DHCP connectivity requirement for Subnet2?

  A. Install the Routing role service on Server2.
  B. Install the IP address Management (IPAM) Server feature on Server2.
  C. Install the Routing role service on Server1.
  D. Install the DHCP Server server role on Server1.
  C. Install the Routing role service on Server1.

• Question 142:

  Your network contains an Active Directory domain named contoso.com that contains a domain controller named DC1. All DNS servers for the network run BIND 10.

  Your perimeter network contains a DHCP server named DHCP1 that runs Windows Server 2016. DHCP1 is a member of a workgroup named WORKGROUP. DHCP1 provides IP address leases to guests accessing the Wi-Fi network.

  Several engineers access the network remotely by using a VPN connection to a remote access server that runs Windows Server 2016. All of the VPN connections use certificate-based authentication and are subject to access policies in

  Network Policy Server (NPS). Certificates are issued by an enterprise certification authority (CA) named CA1.

  All Windows computers on the network are activated by using Key Management Service (KMS). On-premises users use Remote Desktop Services (RDS).

  Which action can you perform on the network by using IPAM?

  A. Manage the DNS zones on the DNS servers.
  B. Audit logon events on the RDS server.
  C. Audit authentication events from DC1.
  D. Manage activations on the KMS server.
  E. Create DHCP reservations on DHCP1.
  F. Audit certificate enrollment requests on CA1.
  C. Audit authentication events from DC1.

• Question 143:

  You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your network. IPAM is configured to use Group Policy provisioning.

  You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones.

  You want to identify which user added the record.

  You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need to ensure that the operational events in the event catalog are never older than one hour.

  What should you do?

  A. From the properties on the DNS zone, modify the refresh interval.
  B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
  C. From Task Scheduler, modify the Microsoft\Windows\IPAM\Audit task.
  D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdlet.
  C. From Task Scheduler, modify the Microsoft\Windows\IPAM\Audit task.

• Question 144:

  You have a Microsoft Azure subscription and an on-premises network.

  To the on-premises network, you deploy a new server named Server1 that runs Windows Server 2016. In Azure, you configure a virtual gateway on an Azure virtual network.

  You need to ensure that the computers on the on-premises network can access virtual machines on the Azure virtual network.

  What should you do on Server1?

  A. Install the Remote Access server role. From the Routing and Remote Access Server Setup Wizard, select Secure connection between two private networks.
  B. Install the Data Center Bridging (DCB) feature, and then run the Install-RemoteAccess cmdlet.
  C. Install the Remote Access server role. From the Routing and Remote Access Server Setup Wizard, select Virtual private network (VPN) access and NAT.
  D. Install the Data Center Bridging (DCB) feature, and then run the Enable-RemoteAccessRoutingDomain cmdlet.
  A. Install the Remote Access server role. From the Routing and Remote Access Server Setup Wizard, select Secure connection between two private networks.

• Question 145:

  You have two servers named Server1 and Server2 that run Windows Server 2016. Both servers have the DHCP Server server role installed.

  Server1 has a DHCP scope named Scope1. Server2 has a DHCP scope named Scope2.

  You need to ensure that client computers can get an IP address if a single DHCP server fails. You must be able to control the percentage of requests to which each DHCP server responds during normal network operations.

  What should you do?

  A. Add Server1 and Server2 as nodes in a failover cluster, and then configure the DHCP Server server role.
  B. Add Server1 and Server2 as nodes in a failover cluster, and then configure the quorum mode.
  C. On Server1 and Server2, configure DHCP failover for Scope1 and Scope2.
  D. Add Server1 and Server2 as nodes in a failover cluster, and then configure port rules for UDP 67 and UDP 68.
  C. On Server1 and Server2, configure DHCP failover for Scope1 and Scope2.

• Question 146:

  HOTSPOT

  You have an IP Filters Network Policy Server (NPS) template that is used by an NPS policy. The IP filters are configured as shown in the following exhibit.

  

  Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

  NOTE: each correct selection is worth one point.

  Hot Area:

  

  

• Question 147:

  You have two servers named Server1 and Server2. Server1 is a DNS server. Server2 is configured to use Server1 as the primary DNS server. You run ipconfig /displaydns on Server2 and receive the following output.

  

  An administrator modifies the records in adatum.com as shown in the Adatum.com Zone exhibit. (Click the Exhibit button.)

  

  The properties of the DNS record for ComputerA are shown in the ComputerA exhibit. (Click the Exhibit button.)

  

  For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

  Hot Area:

  

  

• Question 148:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.

  Information and details provided in a question apply only to that question.

  Your network contains Windows and non-Windows devices.

  You have a DHCP server named Server1 that has an IPv4 scope named Scope1.

  You need to prevent a client computer that uses the same name as an existing registration from updating the registration.

  What should you do?

  A. From the properties of Scope1, modify the Conflict detection attempts setting.
  B. From the properties of Scope1, configure Name Protection.
  C. From the properties of IPv4, configure the bindings.
  D. From IPv4, create a new filter.
  E. From the properties of Scope1, create an exclusion range.
  F. From IPv4 run the DHCP Policy Configuration Wizard.
  G. From Control Panel, modify the properties of Ethernet.
  H. From Scope1, create a reservation.
  B. From the properties of Scope1, configure Name Protection.

• Question 149:

  You have two servers named Server1 and Server2.

  Server1 contains a folder named D:\Videos that contains large video files.

  You configure a replication of D:\Videos to Server2 by using Distributed File System (DFS) Replication.

  You need to increase the size of the staging area for the replicated folder.

  Which cmdlet should you run?

  A. Set-DfsrConnection
  B. Set-DfsrMembership
  C. Set-DfsrReplicatedFolder
  D. Set-DfsrServiceConfiguration
  B. Set-DfsrMembership

• Question 150:

  You have a server that is configured as a hosted BranchCache server.

  You discover that a Service Connection Point (SCP) is missing for the BranchCache server.

  What should you run to register the SCP?

  A. setspn.exe
  B. Reset-BC
  C. ntdsutil.exe
  D. Enable-BCHostedServer
  D. Enable-BCHostedServer