Microsoft 70-740 Online Practice Questions and Exam Preparation

Microsoft 70-740 Online Questions & Answers

• Question 41:

  In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions

  might solve the problem. It is also possible that none of the solutions solve the problem.

  Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

  Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

  On Server1, you have the following zone configuration

  

  You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1 must resolve queries from all other DNS clients

  Solution: From Windows Firewall with Advanced Security on Server1, you create an inbound rule.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

• Question 42:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white

  others might not have a correct solution.

  Your network contains an Active Directory forest

  You install Windows Server 2016 on 10 virtual machines.

  You need to deploy the Web Server (IIS) server role identically to the virtual machines.

  Solution: From a Group policy object (GPO), you create an application control policy, and then you apply the policy to the virtual machines.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 43:

  You have a Hyper-V host named Server1 that runs Windows Server 2016. Server 1 hosts a virtual machine named VM1 that runs Windows Server 2016.

  Server1 has a USB 3.0 device attached to a PCI Express (PCIe) bus.

  You need to provide VM1 with pass-through access to the USB 3.0 device.

  Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 44:

  You have a Windows Server 2016 Server Core named Server1.

  Server1 is configured to perform real-time protection scans by using Windows Defender.

  You need to ensure that all of the files located in D:\App1\Data are excluded from the real-time protection scans.

  What should you do?

  A. Run the Set-MpPreference cmdlet and specify the -ExclusionPath parameter
  B. Run the Get-ChildItem cmdlet and specify the -Exclude parameter
  C. From the properties of the D:\App1\Data folder, modify the permissions
  D. From a command prompt, run the attrib command and specify the -s parameter
  E. From the properties D:\App1\Data folder, enable the Hidden attribute.
  F. Run the Import-ShieldingDataFile cmdlet and specify the -ShieldingDataFilePath parameter
  G. Run the Protect-ShieldingDataFile cmdlet and specify the -ShieldingDataFilePath parameter.
  A. Run the Set-MpPreference cmdlet and specify the -ExclusionPath parameter

  ---

  The Set-MpPreference cmdlet configures preferences for Windows Defender scans and updates. https://docs.microsoft.com/en-us/windows/security/threat-protection/windows-defender-antivirus/configure-extension-file-exclusions-windows-defender-antivirus

• Question 45:

  You create a Storage Spaces Direct hyper-converged failover cluster. The duster contains three nodes and a 1-TB Storage Spaces Direct volume.

  The cluster will store virtual machines.

  You plan to extend the volume by adding an additional 3 TB. What is the minimum amount of extra disk capacity required to accommodate extending the volume?

  A. 3TB on the coordinator node
  B. 3 TB per node
  C. 4 TB per node
  D. 4 TB on the coordinator node
  B. 3 TB per node

  ---

  References: https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/drive-symmetry-considerations

• Question 46:

  You have a server named Server1 that runs Windows Server 2016.

  On Server1 you use the Basic template to create a new Data Collector Set named CollectorSet1.

  You need to configure data collection for the performance counters. The configuration must support the following requirements:

  Data collection must run on a schedule.

  Data collection must stop if there is less than 1 GB of free disk space.

  What should you modify to meet each requirement? To answer, drag the appropriate settings to the correct requirements. Each setting may be used once, more than once, or nor at all. You may need to drag the Split bar between panes or scroll to view content.

  Select and Place:

  

  

• Question 47:

  You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk.

  To each server you attach a new 4-TB SATA hard disk.

  You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.

  Which command should you run before you enable Storage Space Direct?

  A. Add-ClusterSharedVolume -Name “Disk 1” -Cluster Cluster1
  B. New-Cluster -Name Cluster1 -Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ -NoStorage
  C. Get-ClusterAvailableDisk -Cluster Cluster1 | Add-ClusterDisk
  D. New-ClusterStorageEnclosure -id 1 -name Cluster1 -type jbod -ConnectionString “Server1,Server2,Server3,Server4”
  B. New-Cluster -Name Cluster1 -Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ -NoStorage

• Question 48:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white

  others might not have a correct solution.

  Your network contains an Active Directory forest

  You install Windows Server 2016 on 10 virtual machines.

  You need to deploy the Web Server (IIS) server role identically to the virtual machines.

  Solution: From Windows System Image Manager, you create an answer file, you copy the file to C:\Sysprep on each virtual machine, and then you run the Apply- Image cmdlet.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

• Question 49:

  Your network contains an Active Directory domain named adatim.com. The domain contains four member servers that run Windows Server 2016.

  On each server, you locally attach three disks and install the Failover Clustering feature.

  You need to create a volume that uses all the disks. The volume must be highly available.

  Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 50:

  For Windows Server 2016, Nano Server is distributed on the physical media, where you will find a NanoServer folder; this contains a .wim image and a subfolder called Packages. It is these package files that you use to add server roles and features to the VHD image, which you then boot to.

  Assume that several variables have been configured already, which PowerShell command would you use to create a Nano Server which had the Hyper-V role, clustering, OEM Drivers and antimalware?

  A. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName $computername -OEMDrivers -Clustering - Defender -Compute
  B. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName $computername -OEMDrivers -Clustering - Storage -EnableRemoteManagementPort
  C. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName $computername -OEMDrivers -Defender - Containers -EnableRemoteManagementPort
  D. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName $computername -Defender -Storage - Compute - EnableRemoteManagementPort
  A. New-NanoServerImage -MediaPath $mediapath -BasePath $basepath -TargetPath $targetpath -ComputerName $computername -OEMDrivers -Clustering - Defender -Compute