Microsoft 70-740 Online Practice Questions and Exam Preparation

Microsoft 70-740 Online Questions & Answers

• Question 1:

  Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts four virtual machines that are members of the domain. The virtual machines are configured as shown in the following table.

  

  Which virtual machines can you manage by using PowerShell Direct?

  A. VM1, VM2, and VM3
  B. VM1, VM2, and VM4
  C. only VM2
  D. only VM4
  B. VM1, VM2, and VM4

  ---

  To use PowerShell Direct, the host operating system must run at least Windows 10 or Windows Server 2016.

  References:

  https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/manage/manage-windows-virtual-machines-with-powershell-direct#whats-required-to-use- powershell-direct

• Question 2:

  You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 hosts a virtual machine named VM1 that is in a Running state. On Server1, you export VM1 and then you import VM1 on Server2. What is the current state of VM1 on Server2?

  A. Off
  B. Running
  C. Paused
  D. Saved
  D. Saved

• Question 3:

  You have a server named Server1 that runs Windows Server 2016. The Docker daemon run on Server1. You need to ensure that members of a security group named Docker Administrators can administer Docker. What should you do?

  A. Run the Set-Service cmdlet.
  B. Run the sc config command.
  C. Modify the Security settings of Docker
  D. Modify the Security settings of Docker.exe.
  B. Run the sc config command.

  ---

  The preferred method for configuring the Docker Engine on Windows is using a configuration file. The configuration file can be found at 'C:\ProgramData\Docker\config\daemon.json'. If this file does not already exist, it can be created.

  Note: The Docker Engine can also be configured by modifying the Docker service using the sc config command.

  References:

  https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configure-docker-daemon

• Question 4:

  You have an Active Directory domain named Contoso.com. The domain contains servers named Server1, Server2 and Server3 that run Windows Server 2016.

  Server1 and Server 2 are nodes in a Hyper-V cluster named Cluster1. You add a Hyper-V Replica Broker role named Broker1 to Cluster1.

  Server3 is Hyper-V server. A virtual machine VM1 runs on Server3.

  Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only.

  You need to ensure that you can perform the migration of VM1 to Server2.

  What should you do?

  A. Modify the Storage Migration settings on Server3.
  B. Modify the Cluster permissions for Cluster1.
  C. Add the Server3 computer account to the Replicator group on Server1 and Server2.
  D. Modify the Delegation settings of the Server3 computer account.
  D. Modify the Delegation settings of the Server3 computer account.

  ---

  If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation. This involves modifying the Delegation settings of the source server, which is Server3 in this instance.

  References:

  https://technet.microsoft.com/en-us/library/jj134199(v=ws.11).aspx#BKMK_Step1

• Question 5:

  Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is

  exactly the same in each question in this series.

  Start of Repeated Scenario:

  A company named Contoso, ltd. has several servers that run Windows Server 2016 Contoso has a Hyper V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows

  containers and several virtual machines.

  The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network, A firewall separates the upstream server from the downstream

  servers.

  You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.

  The CIO of Contoso identifies the following requirements for the company's IT department:

  Deploy failover cluster to two new virtual machines.

  Store all application databases by using Encrypted File System (EFS).

  Ensure that each Windows container has a dedicated IP address assigned by a DHCP server

  Produce a report that lists the processor time used by all of the processes on a server named Server 1 for five hour.

  Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.

  Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.

  End of Repeated Scenario.

  You need to modify the Hyper V cluster to meet the load balancing requirement for the virtual machine.

  Which command should you run?

  A. network address translation (NAT)
  B. I2bridge
  C. I2tunnel
  D. transparent
  A. network address translation (NAT)

• Question 6:

  You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The hosts are nodes in failover cluster.

  You have a virtual machine named VM1. VM1 connects to a virtual switch named vSwitch1.

  You discover that VM1 automatically live migrates when vSwitch temporarily disconnects.

  You need to prevent VM1 from being live migrated when vSwitch1 temporarily disconnects.

  What should you do?

  A. Run the Set-VMNetworkAdapter cmdlet and set StormLimit to 0.
  B. From the network adapter setting of VM1, disable the Heartbeat integration service.
  C. Run the Set-VMNetworkAdapter cmdlet and set IsManagementOS to False.
  D. From the network adapter setting of VM1, disable the Protected network setting.
  D. From the network adapter setting of VM1, disable the Protected network setting.

• Question 7:

  You have a server named Server1 that runs Windows Server 2016 You need to configure Server1 as a multitenant RAS Gateway. What should you install on Server1?

  A. the Network Policy and Access Services server role
  B. the Remote Access server rote
  C. the Data Center Bridging feature
  D. the Network Controller server role
  B. the Remote Access server rote

• Question 8:

  You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1. VM1 is in a workgroup. VM1 is currently in a running state.

  You need to create 10 copies of VM1 on Server1 in the least amount of time possible.

  Which cmdlets should you use?

  A. Stop-VM, and then Import-VM
  B. Export-VM, and then Import-VM
  C. Checkpoint-VM, and then New-VM
  D. Copy-VMFile, and then New-VM
  B. Export-VM, and then Import-VM

• Question 9:

  Note This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

  Start of Repeated Scenario:

  Your network contains an Active Directory domain named contoso.com The functional level of the forest and the domain is Windows Server 2008 R2 All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.

  The domain contains nine servers that are configured as shown in the following table.

  

  The virtual machines are configured as follows:

  Each virtual machine has one virtual network adapter

  VM1 and VM2 are part of a Network Load Balancing (NIB) cluster.

  All of the servers on the network can communicate with all of the virtual machines.

  End of repeated Scenario.

  You need to minimize the likelihood that a virtual machine running malicious code will consume excessive resources on Server5.

  What should you do?

  A. Configure the virtual machines as shielded virtual machines.
  B. Run the Set-VMProcessor cmdlet and specify the EnableHostResourceProtection parameter.
  C. Run the Set-VMProcessor cmdlet and specify the MaximumCountPerNumaNode parameter.
  D. Configure VM Network Adapter Isolation.
  B. Run the Set-VMProcessor cmdlet and specify the EnableHostResourceProtection parameter.

• Question 10:

  You have two servers named Server1 and Server2 that run Windows Server 2016.

  You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2.

  You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.

  Which cmdlet should you run?

  A. New-NetQosPolicy
  B. Set-NetworkController
  C. New-NetTransportFilter
  D. New-StorageQosPolicy
  D. New-StorageQosPolicy

  ---

  References: https://docs.microsoft.com/en-us/powershell/module/netqos/new-netqospolicy?view=win10-ps