Microsoft 70-740 Online Practice Questions and Exam Preparation

Microsoft 70-740 Online Questions & Answers

• Question 241:

  You have a server named Server1 that runs Windows Server 2016. Server! is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards That connect to a virtual switch named vSwitch1. You configure NIC Teaming on VM1 as shown in the exhibit.

  

  You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1. What should you do?

  A. From Hyper-V Manager on Server1, modify the settings of VM1.
  B. From Windows PowerShell on Server1, run theSet-VmSwitchcmdlet.
  C. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
  D. From the properties of the NIC team on VM1. change the load balancing of the NIC team.
  A. From Hyper-V Manager on Server1, modify the settings of VM1.

• Question 242:

  You have a Hyper-V failover cluster that contains three nodes. Virtual machines are distributed evenly across the cluster nodes. You need to ensure that if a node loses connectivity from the other nodes, the virtual machines on the node will be transitioned to one of the remaining nodes after one minute.

  Which settings should you modify?

  A. QuarantineDuration and QuarantineThreshold
  B. SameSubnetDelay and CrossSubnetDelay
  C. QuorumArbitrationTimeMax and RequestReplyTimeout
  D. ResiliencyPeriod and ResiliencyLevel
  D. ResiliencyPeriod and ResiliencyLevel

  ---

  References: https://blogs.msdn.microsoft.com/clustering/2015/06/03/virtual-machine-compute-resiliency-in-windows-server-2016/

• Question 243:

  Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2016.

  Server1 has IP Address Management (IPAM) installed. Server2 and Server3 have the DHCP Server role installed and have several DHCP scopes configured. The IPAM server retrieves data from Server2 and Server3.

  A domain user named User1 is a member of the groups shown in the following table.

  

  On Server1, you create a security policy for User1. The policy grants the IPAM DHCP Scope Administrator Role with the \Global access scope to the user.

  On Server1, you create a security policy for User1. The policy grants the IPAM DHCP

  Scope Administrator Role with the \Global access scope to the user.

  Which actions can User1 perform? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

• Question 244:

  You create a Nano server image named Nano1.vhdx by using the New-NanoServerImage cmdlet.

  You attach Nano1.vhdx to a Generation 1 virtual machine named Nano1.

  When you start Nano1, you get the following error message: "Boot failure. Reboot and select proper Boot device or Insert Boot Media in selected Boot device"

  You need to successfully start Nano server.

  What should you do?

  A. Attach Nano1.vhdx to a SCSIcontroller.
  B. Recreate Nano1 as a Generation 2 virtual machine.
  C. Increase the memory of Nano1 to 512 Mb.
  D. Modify the BIOS settings of Nano1.
  B. Recreate Nano1 as a Generation 2 virtual machine.

  ---

  A Generation 1 VM cannot boot from a vhdx disk; only a Generation 2 VM can boot from an vhdx disk.

• Question 245:

  HOTSPOT

  You deploy a new Hyper-V host named Server1 that runs Windows Server 2016.

  You implement receive side scaling (RSS) on Server1. The chipset on Server1 does not support NetDMA.

  All of the equipment on your network supports 10-Gbps connectivity.

  On Server1, you deploy a virtual machine named VM1. You configure VM1 to aggregate all of the Windows and non-Windows log files for all of the servers on the network. VM1 has four virtual processors.

  You discover that VM1 drops packets.

  You monitor the network, and you discover that the network capacity is sufficient for the monitoring traffic.

  You monitor the performance of VM1, and you discover that one processor is consistently at 100 percent utilization, while the other processors are barely in use.

  You need to resolve the performance issue.

  What should you do? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

• Question 246:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have two servers that run Windows Server 2016.

  You plan to create a Network load Balancing (NLB) cluster that will contain both servers.

  You need to configure the network cards on the servers for the planned NLB configuration.

  Solution: You configure the network cards to be on the same subnet and to have dynamic IP addresses. You configure the cluster to use multicast.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

  ---

  Following are the hardware requirements to run an NLB cluster.

  All hosts in the cluster must reside on the same subnet.

  There is no restriction on the number of network adapters on each host, and different hosts can have a different number of adapters.

  Within each cluster, all network adapters must be either multicast or unicast. NLB does not support a mixed environment of multicast and unicast within a single cluster.

  If you use the unicast mode, the network adapter that is used to handle client-to-cluster traffic must support changing its media access control (MAC) address.

  Following are the software requirements to run an NLB cluster.

  Only TCP/IP can be used on the adapter for which NLB is enabled on each host. Do not add any other protocols (for example, IPX) to this adapter.

  The IP addresses of the servers in the cluster must be static.

  References:

  https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing

• Question 247:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one

  correct solution, while others might not have a correct solution.

  After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a Server Core installation of Windows Server 2016.

  Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.

  You install the Data Deduplication role service on Server1.

  You need to implement Data Deduplication for volumes on D: and E:.

  Solution: From Windows PowerShell, you run Format-Volume D: -FileSystem NTFS and Enable-DeDupVolume -Volume D:,E:.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  Data Deduplication is supported on NTFS formatted volumes. You, therefore, need to format the ReFS-formatted volume D: as an NTFS volume.

  The Enable-DedupVolume cmdlet enables data deduplication on one or more volumes.

  References:

  https://docs.microsoft.com/en-us/windows-server/storage/data-deduplication/understand

  https://docs.microsoft.com/en-us/powershell/module/deduplication/enable-dedupvolume?view=win10-ps

• Question 248:

  You have a Hyper-V server named Server1 that runs Windows Server 2012 R2.

  Server1 hosts a virtual machine named VM1 that runs Windows Server 2016. VM1 connects to an external virtual switch named Switch1.

  You can ping VM1 from Server1.

  You upgrade Server1 to Windows Server 2016.

  You need to ensure that you can connect to VM1 by using PowerShell Direct.

  What should you do?

  A. Configure the firewall rules on Server1.
  B. Enable the Hyper-V extensible switch extensions on Server1.
  C. Upgrade the configuration version of VM1.
  D. Configure the firewall rules on VM1.
  C. Upgrade the configuration version of VM1.

  ---

  References: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/upgrade-virtual-machine-version-in-hyper-v-on-windows-or-windows-server

• Question 249:

  DRAG DROP

  You have a server named Server1 that runs Windows Server 2016.

  On Server1, you create a Nano Server image named Disk1.vhdx.

  You need to start Server1 by using Disk1.vhdx.

  Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 250:

  You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.

  You need to apply patches to Server1.

  Which two commands should you run before you apply the patches? To answer, select the appropriate options in the answer area.

  Hot Area: