Microsoft 70-740 Online Practice Questions and Exam Preparation

Microsoft 70-740 Online Questions & Answers

• Question 191:

  Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question You have two servers named Server1 and Server2 that run Windows Server 2016 Server1 and Server2 have the Hyper-V server role installed An iSCSI SAN connects to the network You create a LUN on the SAN and configure both servers to connect to the iSCSI target You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage You need to add the shared storage to the cluster The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously. Which tool should you use?

  A. the clussvc.exe command
  B. the cluster.exe command
  C. the Computer Management console
  D. the configurehyperv.exe command
  A. the clussvc.exe command

• Question 192:

  Which terminology is being described below?

  Time synchronization is critical for the proper operation of many Windows services and line-ofbusiness applications. The ___ uses the Network Time Protocol (NTP) to synchronize computer clocks on the network so that an accurate clock value, or time stamp, can be assigned to network validation requests and resource access requests.

  A. Network Services Shell (Netsh)
  B. Listsvc
  C. Fixmbr
  D. Windows Time service (W32time)
  D. Windows Time service (W32time)

  ---

  The correct answer is Windows Time service (W32time)

• Question 193:

  On a new server, you install Windows Server 2016 and then you install the Hyper-V server role.

  You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server.

  Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 194:

  HOTSPOT

  Your network contains an Active Directory domain named contoso com The domain contains tour servers named Server 1. Server2. Server3. and Server4 that run Windows Server 2016.

  Server 1 and Server2 are nodes in Hyper-V cluster named Cluster1 You have a highly available virtual machine named VM1.

  Server1 is the owner node of VM1 Server3 and Server4 are nodes of a scale-out file server named Cluster2.

  The storage on Server1 is configured as shown in the following table.

  

  VM1 is stored in C:\ClusterStorage\Volume1.

  You need to move the virtual disk of VM1 to a different location.

  What should you do? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

• Question 195:

  Your network contains an on-premises Active Directory domain. The domain contains 25 servers that run Windows Server 2016.

  You have a hybrid deployment of Microsoft Azure Active Directory (Azure AD).

  You plan to manage the servers by using Windows Admin Center.

  You install Windows Admin Center on one of the servers.

  You need to ensure that connections to Windows Admin Center are authenticated by using multi-factor authentication (MFA).

  What should you do first?

  A. Install an extension to Windows Admin Center
  B. Configure Allowed groups
  C. Register the gateway to Azure AD
  D. Import a certificate by using Windows Admin Center
  C. Register the gateway to Azure AD

  ---

  References: https://docs.microsoft.com/en-us/windows-server/manage/windows-admin-center/configure/user-access- control

• Question 196:

  HOTSPOT

  You plan to deploy three servers named Server1, Server2, and Server3 that will run Windows Server 2016. The servers will have the following disk configurations:

  

  Server1 will have a C: drive of 2 TB.

  

  Server2 will have two disks. The C: drive will be 2 TB. The D: drive will be 1TB. D: must support file system-based compression.

  

  Server3 will have two disks. The C: drive will be 2 TB. The D: drive will be 1TB and must support file-system based quotas.

  Which file system can you use for each drive? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

• Question 197:

  Note This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You are a server administrator at a company named Contoso, Ltd.

  Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.

  

  All of the virtual switches are of the external type.

  You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.

  Solution: You implement live migration by using Host1 and Host2.

  Does this meet the goat?

  A. Yes
  B. No
  B. No

• Question 198:

  You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host. You run the commands shown in the following graphic:

  

  Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

  Hot Area:

  

  

• Question 199:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  Your network contains an Active Directory forest named contoso.com.

  You need to identify which server is the schema master.

  Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

  ---

  References: https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo-roles/

• Question 200:

  Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

  A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.

  The WSUS deployment contains one upstream server that is located on the company's perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream

  servers.

  You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.

  The CIO of Contoso identifies the following requirements for the company's IT department:

  1.

  Deploy a failover cluster to two new virtual machines.

  2.

  Store all application databases by using Encrypted File System (EFS).

  3.

  Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.

  4.

  Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.

  5.

  Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.

  6.

  Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent. Which two actions should you perform to meet the encryption requirement for WSUS? Each correct answer presents part of the solution.

  A. Require SSL on the Inventory virtual directory.
  B. Require SSL on the ClientWebService virtual directory.
  C. Create a firewall rule to allow TCP port 443.
  D. Create a firewall rule to allow TCP port 8531.
  B. Require SSL on the ClientWebService virtual directory.
  C. Create a firewall rule to allow TCP port 443.

  ---

  References: https://technet.microsoft.com/en-us/library/bb633246.aspx https://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers