Microsoft 70-740 Online Practice Questions and Exam Preparation

Microsoft 70-740 Online Questions & Answers

• Question 141:

  You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012. VM1 has the following configuration.

  

  You discover that when you back up Server1, VM1 temporarily pauses.

  You need to ensure that you can back up Server1 without causing downtime on VM1.

  What should you do?

  A. Increase the memory on VM1
  B. Connect the hard disk drive of VM1 to an SCSI controller
  C. Update the virtual machine version of VM1
  D. Upgrade VM1 to Windows Server 2016
  E. Enable the VSS integration service on VM1
  E. Enable the VSS integration service on VM1

  ---

  References: https://www.starwindsoftware.com/blog/hyper-v-backup-challenges-windows-server-2016-needs-to- address

• Question 142:

  You need to create highly available storage spaces that connect to directly attached storage on the hosts Which cmdlet should you use?

  A. Enable-ClusterStorageSpacesDiret
  B. Set-StoragePool
  C. Add-ClusterDisk
  D. Update-ClusterVirtualMachineConfiguration
  A. Enable-ClusterStorageSpacesDiret

• Question 143:

  HOTSPOT

  You have a four-node Hyper-V cluster named Cluster1.

  A virtual machine named VM1 runs on Cluster1. VM1 has a network adapter that connects to a virtual switch named Network1.

  You need to prevent a network disconnection on VM1 from causing VM1 to move to another cluster node.

  What command should you run? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

• Question 144:

  Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2016. As a domain administrator, you log on to a server named Server2 and open Windows Power Shell. You need to establish an interactive Power Shell session to a server named Server 1-Which command should you run?

  A. Enable-PSRemoting Server 1
  B. Enter-PSSession -ComputerName Server
  C. New-PSSession -Name Server
  D. Set-PSSession Configuration -AccessMode Remote -Name Server
  B. Enter-PSSession -ComputerName Server

• Question 145:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.

  Information and details provided in a question apply only to that question.

  You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a virtual machine that uses a virtual hard disk (VHD) named disk1.vhdx.

  You receive the following warning message from Event Viewer: "One or more virtual hard disks have a physical sector size that is smaller than the physical sector size of the storage on which the virtual hard disk file is located."

  You need to resolve the problem that causes the warning message.

  What should you run?

  A. the Mount-VHD cmdlet
  B. the Diskpart command
  C. the Set-VHD cmdlet
  D. the Set-VM cmdlet
  E. the Set-VMHost cmdlet
  F. the Set-VMProcessor cmdlet
  G. the Install-WindowsFeature cmdlet
  H. the Optimize-VHD cmdlet
  C. the Set-VHD cmdlet

  ---

  References: https://technet.microsoft.com/en-us/library/hh848561(v=wps.630).aspx

• Question 146:

  You are preparing an image of Windows Server 2016.

  The image is missing the driver foe a network adapter that is required in your environment.

  You need to ensure that the image contains the network adapter driver.

  Which three cmdlets should you use in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the? answer area and arrange them m the correct order.

  Select and Place:

  

  

• Question 147:

  HOTSPOT

  Your network contains an Active Directory domain named contoso.com. The domain contains the servers shown in the following table.

  

  Server1 has a volume named D that contains the files shown in the following table.

  

  Server1 fails.

  You plan to move volume D to a different server.

  Which files can you access if you move volume D to Server2 or Server3? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  Hot Area:

  

  

• Question 148:

  You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.

  Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3. You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1. What should you do?

  A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
  B. From Hyper-V Manager on Server1, modify the settings on VM1.
  C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
  D. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
  B. From Hyper-V Manager on Server1, modify the settings on VM1.

  ---

  https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/nic-teaming/nic-teaming

• Question 149:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, yon will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have two servers that run Windows Server 2016.

  You plan to create a Network Load Balancing (NLB) cluster that will contain both servers.

  You need to configure the network cards on the servers for the planned NLB configuration.

  Solution: You configure the network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use unicast.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  Following are the hardware requirements to run an NLB cluster.

  All hosts in the cluster must reside on the same subnet.

  There is no restriction on the number of network adapters on each host, and different hosts can have a different number of adapters.

  Within each cluster, all network adapters must be either multicast or unicast. NLB does not support a mixed environment of multicast and unicast within a single cluster.

  If you use the unicast mode, the network adapter that is used to handle client-to-cluster traffic must support changing its media access control (MAC) address.

  Following are the software requirements to run an NLB cluster.

  Only TCP/IP can be used on the adapter for which NLB is enabled on each host. Do not add any other protocols (for example, IPX) to this adapter.

  The IP addresses of the servers in the cluster must be static.

  References:

  https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing

• Question 150:

  DRAG DROP

  You have a network that contains several servers that run Windows Server 2016.

  You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:

  -Install the Web Server server role.

  -Start the World Wide Web Publishing service.

  How should you configure the DSC resources? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  Select and Place: