Microsoft 70-662 Online Practice Questions and Exam Preparation

Microsoft 70-662 Online Questions & Answers

• Question 141:

  You have a hosted Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  An internal user named User1 sends a confidential message to another internal user named User2. User1 does not have any administrative privileges in the organization.

  You need to ensure that User1 can identify whether the message was successfully delivered.

  What should you instruct User1 to do?

  A. View the message headers in the sent item folder
  B. Open Microsoft Outlook and modify Read Receipt Settings
  C. Open Microsoft Outlook and modify Delivery Receipt Settings
  D. Open the Exchange Control Panel (ECP) and select Organize E-Mail.
  D. Open the Exchange Control Panel (ECP) and select Organize E-Mail.

• Question 142:

  Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2.

  You have a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1). You plan to install the following Exchange Server 2010 SP1 server roles on Server1:

  

  Mailbox

  

  Client Access

  

  Hub Transport

  You need to prepare Served for the planned installation. You import the Server Manager module for Windows PowerShell.

  What should you do next?

  A. From Windows PowerShell, run add-windowsfeature net-framework,rsat,adlds.
  B. At the command prompt, run servermanagercmd and use the Exchange-Typical.xml template.
  C. From Windows PowerShell, run add-windowsfeature net-framework. From the Exchange Server 2010 installation program, select the Automatically install Windows Server roles and features required for Exchange Server check box.
  D. At the command prompt, run servermanagercmd and use the Exchange-Base.xml template.
  E. At the command prompt, run setup /pl. From the Exchange Server 2010 installation program, select the Automatically install Windows Server roles and features required for Exchange Server check box.
  F. From Windows PowerShell, run add-windowsfeature net-framework,rsat-adds,web- server,web- basicauth.
  C. From Windows PowerShell, run add-windowsfeature net-framework. From the Exchange Server 2010 installation program, select the Automatically install Windows Server roles and features required for Exchange Server check box.

  ---

  Reference: http://msmvps.com/blogs/andersonpatricio/archive/2010/07/07/installing-operating-system-roles- and- featuresautomatically-in-exchange-server-2010-sp1.aspx http://technet.microsoft.com/en-us/library/ bb691354.aspx (under the "Install the Windows 2008 R2 operatingsystem prerequisites" section) http://msmvps.com/blogs/richardsiddaway/archive/2009/04/18/powershell-modules-and- exchange-2010- prerequisites.aspx

• Question 143:

  You have an Exchange organization that contains Exchange 2000 Server and Exchange Server 2003 Service Pack 2 (SP2) servers.

  You plan to transition the organization to Exchange Server 2010.

  You need to prepare the Exchange organization for the deployment of Exchange Server 2010 Mailbox, Client Access, and Hub Transport servers.

  What should you do first?

  A. Install the Active Directory Connector (ADC).
  B. Delete all Recipient Update Service (RUS) objects
  C. Deploy an Exchange Server 2010 Edge Transport server.
  D. Remove all Exchange 2000 Servers from the organization.
  D. Remove all Exchange 2000 Servers from the organization.

  ---

  Ex 2000 is not supported in an Exchange 2010 organization. http://technet.microsoft.com/en-us/library/ aa998604.aspx

• Question 144:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  All users access their mailboxes by using Microsoft Office Outlook 2007, Outlook Anywhere, and Autodiscover.

  You need to prevent users who have client computers that are joined to the domain from being prompted for authentication when they use Outlook Anywhere. All other users must be prompted for authentication when they use Outlook

  Anywhere.

  What should you do?

  A. Configure Outlook Anywhere to use Basic authentication. Enable only Basic authentication on the RPC virtual directory.
  B. Configure Outlook Anywhere to use NTLM authentication. Enable only Basic authentication on the RPC virtual directory.
  C. Configure Outlook Anywhere to use Basic authentication. Enable Basic authentication and NTLM authentication on the RPC virtual directory.
  D. Configure Outlook Anywhere to use NTLM authentication. Enable Basic authentication and NTLM authentication on the RPC virtual directory.
  D. Configure Outlook Anywhere to use NTLM authentication. Enable Basic authentication and NTLM authentication on the RPC virtual directory.

• Question 145:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed. All servers run Windows Server 2008 R2.

  The organization contains Mailbox servers, Client Access servers, and Hub Transport servers only.

  You need to ensure that you can review any changes made by administrators to the Exchange configuration. The solution must identify which administrator performed each change.

  What should you do?

  A. Modify the Log Settings from the properties of the Hub Transport server.
  B. Run the Get-User cmdlet.
  C. Enable SMTP protocol logging.
  D. Run the Get-MailboxFolderStatistics cmdlet.
  E. Run the Set-EventLogLevel cmdlet.
  F. Run the Get-MailboxStatistics cmdlet.
  G. Run the Exchange Best Practices Analyzer.
  H. Run the Set-AdminAuditLogConfig cmdlet.
  I. Review the Application event log.
  J. Review the connectivity logs.
  H. Run the Set-AdminAuditLogConfig cmdlet.

  ---

  To configure the cmdlet auditing list, you need to run Set-AdminAuditLogConfig AdminAuditLogCmdlets followed by the cmdlet name to be audited. For instance, to audit cmdlets that contain the keyword "mailbox" within the cmdlet name, run:

  Reference:

  http://technet.microsoft.com/en-us/library/dd335109.aspx http://technet.microsoft.com/en-us/library/ dd298169.aspx http://www.exchangeinbox.com/article.aspx?i=151

• Question 146:

  Your network contains an Exchange Server 2010 Service Pack 1 (SP1) organization named fabrikam.com.

  A user named User1 is a member of the legal department.

  You need to provide User1 with the ability to search for mailbox content in multiple mailboxes.

  Which Windows PowerShell cmdlet should you use?

  A. New-ManagementRoleAssignment
  B. New-ManagementRole
  C. New-ManagementRoleEntry
  D. Add-MailboxPermission
  A. New-ManagementRoleAssignment

• Question 147:

  Your network contains an Exchange Server 2010 Service Pack 1 (SP1) organization.

  You need to ensure that all of the email messages sent to the Internet from the organization are routed through a smart host named Served.

  What should you do?

  A. From the Exchange Management Console (EMC), modify the properties of the remote domain.
  B. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
  C. From the Exchange Management Shell, run the Set-SendConnector cmdlet.
  D. From the Exchange Management Console (EMC), modify the properties of the Receive connector.
  C. From the Exchange Management Shell, run the Set-SendConnector cmdlet.

  ---

  *

  Use the Set-SendConnector cmdlet to modify a Send connector on a computer that has the Hub Transport server role or the Edge Transport server role installed.

  *

  Route mail through the following smart hosts This is a configurable option of a send connector.

  *

  Send connectors create a logical connection to remote e-mail systems and are responsible for outbound transmission of e-mail messages. If you use the EdgeSync process, it will configure the Send connectors required for mail flow to the Internet and to the Edge Transport servers in your Microsoft Exchange Server 2010 organization. If your organization requires a Send connector with specific configuration options, or if you don't use the EdgeSync process, you must manually configure Send connectors.

• Question 148:

  Your company has three departments named Sales, Marketing, and Finance. The network contains an Active Directory domain named contoso.com. You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains the servers configured as shown in the following table:

  

  You Create an Edge Subscription for Server2. You plan to encrypt all of the email sent to a partner company named A. Datum Corporation by using Transport Layer Security (TLS). You need to prepare Server1 for the planned configuration.

  What should you create?

  A. a new Receive connector
  B. a new federation trust
  C. a new Edge Subscription
  D. an attachment filter entry
  E. an accepted domain
  F. an Edge Transport rule
  G. a new journal rule
  H. a new Send connector
  I. a remote domain
  J. an IP Block List Provider
  H. a new Send connector

  ---

  http://technet.microsoft.com/en-us/library/aa997285.aspx Partner Send connectors send e-mail to partner domains. This connector is configured to only allow connections to servers that authenticate with Transport Layer Security (TLS)

  certificates for SMTP domains included in the list of domain-secured domains. You can add domains to this list by using the TLSSendDomainSecureList parameter in the Set-TransportConfig command.

  Reference:

  http://technet.microsoft.com/en-us/library/aa997285.aspx http://technet.microsoft.com/en-us/library/ bb124392.aspx http://technet.microsoft.com/en-us/library/bb123543.aspx

• Question 149:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed. You have a user named User1 that must be the only moderator of a room mailbox.

  

  Which tab should you click to complete this?

  A. Resource Information.
  B. Resource Out-of-Policy Requests.
  C. Account.
  D. Mailbox Features.
  E. Resource General.
  F. Resource In-Policy.
  G. Resource Policy.
  H. Mail Flow.
  G. Resource Policy.

• Question 150:

  You have an Exchange Server 2010 database availability group (DAG) that contains five members and a mailbox database named DB1. You need to identify which servers have a copy of DB1. The solution must also identify the log replay lag times for each copy.

  Which command should you run?

  A. Get-Availabilityconfig -Identity DB1 | FL
  B. Get-DatabaseAvailabilityGroup -Identity DB1 | FL
  C. Get-MailboxDatabase -Identity DB1 | FL
  D. Get-MailboxDatabaseCopyStatus -Identity DB1 | FL
  C. Get-MailboxDatabase -Identity DB1 | FL