Microsoft 70-662 Online Practice Questions and Exam Preparation

Microsoft 70-662 Online Questions & Answers

• Question 131:

  You work as the Enterprise Exchange Administrator at ABC.com. The ABC.com network consists of a domain named ABC.com.

  ABC.com currently makes use of Exchange 2000 Server and Exchange Server 2003 Service Pack 2 (SP2) in their messaging system. You receive instruction from ABC.com to migrate the messaging system to Exchange Server 2010 with

  Client Access, Mailbox and Hub Transport servers.

  What actions must you take?

  A. You should remove the Exchange 2000 Server servers from the environment.
  B. You should configure EdgeSync synchronization in the environment.
  C. You should run the setup /NewProvisionedServer in the environment.
  D. You should run the Migration Preparation Tool from the other servers in the environment.
  A. You should remove the Exchange 2000 Server servers from the environment.

• Question 132:

  You are a network administrator for a company named Contoso, Ltd. Contoso has an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com. The organization contains the following Exchange servers:

  -

  Two Hub Transport servers

  -

  Two Edge Transport servers that have Edge Subscriptions

  Contoso merges with another company named Fabrikam, Inc. Fabrikam has an Exchange Server 2010 SP1 organization that uses the fabrikam.com SMTP domain. All mail exchange (MX) records for fabrikam.com point to the contoso.com

  Edge Transport servers.

  You deploy a solution for Contoso to journal all email messages by using Hub Transport rules.

  You need to ensure that all email messages received by fabrikam.com users from the Internet are journaled by the contoso.com Exchange organization.

  What should you do?

  A. From the Exchange Management Shell, run the new-accepteddomain -domaintype internalrelay command.
  B. From the Exchange Management Shell, run the new-sendconnector -addressspaces fabrikam.com command.
  C. From the Exchange Management Console (EMC), create an accepted domain that uses the authoritative domain type.
  D. From the Exchange Management Shell, run the new-receiveconnector -partner command.
  E. From the Exchange Management Shell, run the new-accepteddomain -domaintype externalrelay command.
  F. From the Exchange Management Console (EMC), create an accepted domain that uses the internal relay domain type.
  A. From the Exchange Management Shell, run the new-accepteddomain -domaintype internalrelay command.

  ---

  Accepted Domain = Any domain whose email will be routed by the Exchange organization transport servers

  Authoritative Domain = used to specify which SMTP domain is served by your Exchange organization; an exchange organization is authoritative when it handles mail delivery for recipients in the accepted domain. Internal Relay = Hub to Hub

  between Exchange Organizations External Relay = Edge to Edge between Exchange Organizations Journaling can be done on a per user or per mailbox database basis. Journal rules can also be made Global, thereby journaling all

  messages that pass through the Hub Transport server.

  References:

  http://technet.microsoft.com/en-us/library/bb124423.aspx http://technet.microsoft.com/en-us/library/ aa996314.aspx http://technet.microsoft.com/en-us/library/aa995975.aspx http://technet.microsoft.com/en- us/library/aa998649.aspx http://

  technet.microsoft.com/en-us/library/bb124911.aspx http:// blogs.technet.com/b/exchange/archive/2011/10/07/accepted-domains-shared-smtp-address- spaces- andrecipient- filtering.aspx

• Question 133:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  You have a database availability group (DAG) that contains two servers named MBX1 and MBX2. You discover that a mailbox database named DB2 is in a FailedAndSuspended state on MBX2.

  You need to reseed DB2 to MBX2.

  You must achieve this goal by using the minimum amount of administrative effort.

  Which cmdlet should you run?

  A. Restore-DatabaseAvailabilityGroup
  B. Resume-MailboxDatabaseCopy
  C. Set-DatabaseAvailabilityGroup
  D. Update-MailboxDatabaseCopy
  D. Update-MailboxDatabaseCopy

• Question 134:

  Your company has offices in New York and Montreal. Each office is configured as an Active Directory site.

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains five servers. The servers are configured as shown in the following table.

  

  Each Mailbox server contains two mailbox databases. All users have a mailbox on their local Mailbox server.

  Server3 contains a public folder database.

  You create a new public folder database on Server4.

  You need to ensure that all new public folders created by users are created on Server4.

  What should you modify?

  A. the mailbox features
  B. an Attachment Filter agent
  C. the Autodiscover DNS record
  D. the email address policy
  A. the mailbox features

• Question 135:

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains five servers. The servers are configured as shown in the following table.

  

  All users access their mailbox by using Microsoft Outlook 2010. You discover that email messages take a long time to be delivered to the Internet. You also discover that there are many email messages waiting in transport queues. You need to identify how long it takes for an email message to be delivered from Server2 to Server5.

  Which cmdlet should you run?

  A. Test-MRSHealth
  B. Test-SmtpConnectivity
  C. Get-MailboxDatabase
  D. Get-Message
  E. Get-MailboxFolderStatistics
  F. Get-MailboxStatistics
  G. Test-MaptConnectivity
  H. Get-TransportServer
  I. Test-MailFlow
  J. Test-OutlookWebServices
  I. Test-MailFlow

  ---

  Use the Test-Mailflow cmdlet to diagnose whether mail can be successfully sent from and delivered to the system mailbox on a computer that has the Mailbox server role installed. You can also use this cmdlet to verify that e-mail is sent between Mailbox servers within a defined latency threshold.

  This example tests message flow from the server Mailbox1 to the server Mailbox2. Test-Mailflow Mailbox1 -TargetMailboxServer Mailbox2 http://technet.microsoft.com/en-us/library/aa995894.aspx

• Question 136:

  You have an Exchange Server 2010 organization.

  A user named User1 reports that many of the email messages sent to him from the Internet are not delivered to his mailbox.

  You suspect that the email messages are incorrectly identified as spam. You need to temporarily disable antispam filtering for all email messages sent to User1.

  What should you do?

  A. From the Exchange Management Shell, run the Set-Mailbox cmdlet.
  B. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
  C. From the Exchange Management Console (EMC), modify the content filtering properties.
  D. From the Exchange Management Console (EMC), modify the recipient filtering properties.
  A. From the Exchange Management Shell, run the Set-Mailbox cmdlet.

• Question 137:

  You need to copy the configuration of an Edge Transport Server. You run the Export- edgeconfig.ps1 script. What other action should you perform?

  A. Export-exchange certificate
  B. Export-transport rule connection
  C. Backup system state
  D. You must log on by using an account that is a member of the local Administrators group on that computer
  A. Export-exchange certificate

• Question 138:

  You have two Exchange Server 2010 Service Pack 1 (SP1) servers named Server1 and Server2.

  Server1 has the Mailbox server role installed.

  Server2 has the Hub Transport and Client Access server roles installed.

  You need to ensure that users can send e-mail and receive e-mail by using Windows Live Mail or Microsoft Outlook Express.

  What should you do?

  A. From the command Prompt on server1, run net start MsExchangePOP3
  B. From the command Prompt on Server2, run net start MsExchangePOP3
  C. On Server1 and Server2, modify the properties of the MsExchangePOP3 (TCP-in) Windows Firewall rule
  D. On Server1, modify the properties of the MsExchangeIMAP4 (TCP-in) Windows Firewall rule. On server2, modify the properties of the client receive connector
  B. From the command Prompt on Server2, run net start MsExchangePOP3

• Question 139:

  You work as an Exchange Administrator for ABC Inc. The company has a Windows 2008 Active Directorybased network. The network contains an Exchange Server 2010 organization. You need to enable automatic booking for a room mailbox called TrainingRoom. Which of the following commands will you enter in the Exchange Management Shell to accomplish this task?

  A. New-CalendarProcessing TrainingRoom -AutomateProcessing:AutoAccept.
  B. Set-CalendarProcessing TrainingRoom -AutomateProcessing:AutoAccept.
  C. Set-MailboxCalendarSettings TrainingRoom -AutomateProcessing:None.
  D. New-Mailbox -UserPrincipalName [email protected] -database "Mailbox Database" -Name "Training Room" -OrganizationalUnit Users -DisplayName "Training Room" - ResetPasswordOnNextLogon $false -Room AutomateProcessing:AutoAccept.
  B. Set-CalendarProcessing TrainingRoom -AutomateProcessing:AutoAccept.

• Question 140:

  You have an Exchange organization named nwtraders.com. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  Your company acquires another company named Contoso, Ltd. You plan to create new mailboxes for each user from Contoso. You need to ensure that each new mailbox can receive e-mail messages sent to contoso.com.

  Which two objects should you create? (Each correct answer presents part of the solution. Choose two.)

  A. an accepted domain
  B. a Receive connector
  C. an organizational relationship
  D. an e-mail address policy
  E. a Remote domain
  A. an accepted domain
  D. an e-mail address policy

  ---

  An accepted domain is any SMTP namespace for which a Microsoft Exchange organization sends or receives e-mail. Accepted domains include those domains for which the Exchange organization is authoritative. An Exchange organization is authoritative when it handles mail delivery for recipients in the accepted domain.

  Accepted domains also include domains for which the Exchange organization receives mail and then relays it to an e-mail server that's outside the Active Directory forest for delivery to the recipient.

  You must configure an accepted domain before that SMTP address space can be used in an e- mail address policy. When you create an accepted domain, you can use a wildcard character (*) in the address space to indicate that all subdomains of the SMTP address space are also accepted by the Exchange organization. For example, to configure Contoso.com and all its subdomains as accepted domains, enter *.Contoso.com as the SMTP address space. The accepted domain entries are automatically available for use in an e-mail address policy. If you delete an accepted domain that's used in an e-mail address policy, the policy is no longer valid, and recipients with e-mail addresses in that SMTP domain will be unable to send or receive e-mail. http://technet.microsoft.com/en-us/library/bb124423