Microsoft 70-347 Online Practice Questions and Exam Preparation

Microsoft 70-347 Online Questions & Answers

• Question 251:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

  others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You need to recommend a solution to implement the planned change for the email addresses of the New York office managers.

  Solution: From the Exchange Management Shell, create a new email address policy by running the New-EmailAddressPolicy cmdlet and specifying the –RecipientFilter parameter. Run the Update-EmailAddressPolicy cmdlet.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  Running the New-EmailAddressPolicy cmdlet with the –RecipientFilter parameter creates an email address policy with an OPath filter that's based on the value of any available recipient property. The EmailAddresses poperty, which contains the recipient's email addresses (the primary email address and all proxy addresses), can be used. The Update-EmailAddressPolicy cmdlet must then be used to apply new or updated email address policies to the affected recipients in an on-premises Exchange organization. References: https://technet.microsoft.com/en-us/library/aa996800(v=exchg.160).aspx https://technet.microsoft.com/en-us/library/bb738157(v=exchg.160).aspx https://technet.microsoft.com/en-us/library/aa996869(v=exchg.160).aspx

• Question 252:

  DRAG DROP

  An organization has an on-premises Exchange 2010 server. The organization plans to migrate to Exchange Online.

  You have the following requirements:

  You must minimize the impact of the migration on users.

  Users must sign in to Office 365 by using the same password that they use for onpremises services.

  You must use the fewest additional servers possible.

  You need to complete the migration.

  Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Actions

  Select and Place:

  

  

• Question 253:

  HOTSPOT

  Your company subscribes to Office 365 Small Business.

  You need to disable all contact synchronization.

  Which two service categories should you configure? To answer, select the appropriate service categories in the answer area.

  Hot Area:

  

  

  ---

  Contact synchronization can be configured in the “email, calendar, and contacts” section.

  Contact synchronization for mobile device can be configured in the “mobile access” section.

  References: https://support.office.com/en-us/article/Manage-Facebook-contact-sync-inyour-organization-16692518-014c-422f-8d8a-341b2c1f09d9

  https://support.office.com/en-us/article/Let-users-sync-email-contacts-with-their-iPhone-oriPad-de9cd26c-1a52-4fe1-b04c-b001693e20d6

• Question 254:

  You are the Office 365 administrator for your company. The company has a single Active Directory Domain Services domain. As part of the Office 365 deployment, the company is preparing to deploy Office Telemetry.

  You need to disguise file names and document titles, while still collecting the telemetry data.

  What should you do?

  A. In the Telemetry Dashboard, display only files that are used by multiple users.
  B. On each client computer, edit the registry to prevent telemetry logging.
  C. In the Telemetry Dashboard, obfuscate the document name, title, and path.
  D. In the Telemetry Dashboard, apply a label named Private to employees.
  C. In the Telemetry Dashboard, obfuscate the document name, title, and path.

  ---

  The enable file obfuscation policy setting configures the Telemetry Agent to disguise the file name, file path, and title of Office documents before uploading telemetric data to the shared folder.

• Question 255:

  HOTSPOT

  You are the Office 365 administrator for a company. You plan to implement Microsoft Exchange Online and Skype for Business Online.

  Exchange Online and Skype for Business Online must support multi-factor authentication (MFA) using an Active Directory Authentication Library (ADAL) based sign-in.

  You need to configure the applications.

  What should you do? To answer, select the appropriate actions in the dialog box in the answer area.

  NOTE: Each correct selection is worth one point.

  Hot Area:

  

  

  ---

  Box 1:

  To turn Modern Authentication on for Exchange Online, you'll need to run some PowerShell cmdlets. In the case of Office 2013 client apps, you will need to change some registry keys on client machines.

  Connect to Exchange Online and run the following cmdlets:

  Set-OrganizationConfig -OAuth2ClientProfileEnabled:$true

  Box 2: Set-CsOAuthConfiguration

  Modifies the Open Authorization (OAuth) configuration settings currently in use in the organization.

  References: https://docs.microsoft.com/en-us/powershell/module/skype/set-csoauthconfiguration?view=skype-ps

• Question 256:

  DRAG DROP

  Your company has a Microsoft Office 365 tenant.

  The company implements a new compliance policy.

  You need to deploy a solution to meet the following compliance policy requirements:

  Delete documents stored in Microsoft SharePoint that contain passport numbers and are at least one year old.

  Prevent email messages that contain passport numbers from being sent to external recipients.

  Ensure that all other SharePoint documents are retained for seven years, and then deleted.

  What is the minimum number of policies you should configure from the Security and Compliance admin center? To answer, drag the appropriate numbers to the correct policy types. Each number may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  NOTE: Each correct selection is worth one point.

  Select and Place:

  

  

• Question 257:

  HOTSPOT

  Contoso, Ltd., has an Office 365 tenant. All employees have Exchange Online mailboxes.

  You create a shared mailbox named [email protected].

  You need to grant full mailbox access to [email protected] for the SharedMailbox1 mailbox.

  How should you complete the relevant Windows PowerShell commands? To answer, select the appropriate Windows PowerShell commands from each list in the answer area.

  Hot Area:

  

  

  ---

  The Add-MailboxPermission is available in on-premises Exchange Server 2016 and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

  Use the Add-MailboxPermission cmdlet to add permissions to a mailbox.It applies to Exchange Online and Exchange Server.

  Example:

  This example grants Kevin Kelly full access to Terry Adams's mailbox.

  Add-MailboxPermission -Identity "Terry Adams" -User KevinKelly -AccessRights

  FullAccess -InheritanceType All

  References:

  https://technet.microsoft.com/en-us/library/bb124097(v=exchg.160).aspx

• Question 258:

  Your company has an Office 365 subscription. You need to add the label "External" to the subject line of each email message received by your organization from an external sender. What should you do?

  A. From the Exchange Control Panel, add a MailTip.
  B. From the Forefront Online Protection Administration Center, set the footer for outbound email.
  C. Run the Enable-InboxRule cmdlet.
  D. From the Exchange Control Panel, run the New Rule wizard.
  D. From the Exchange Control Panel, run the New Rule wizard.

  ---

  The New Rule wizard in the Exchange Control Panel is used to configure Transport Rules.

  You can use Exchange transport rules to look for specific conditions in messages that pass through your organization and take action on them. Transport rules contain a set of conditions, exceptions, and actions, which provides you with the

  flexibility to implement many types of messaging policies.

  Transport rules have the following components:

  In this question, we would configure a transport rule with a condition configured to specify email from external senders and an action of adding the label "External" to the subject line of the email message.

  References: https://community.office365.com/en-us/f/158/t/5988

• Question 259:

  You are the Office 365 administrator for your company.

  The company's environment includes Office 2007, Office 2010, Office 2013, Windows 7, and Windows 8.

  The company uses Office Telemetry.

  You need to collect Office version usage data for an upcoming migration to Office 365 ProPlus.

  What should you do?

  A. Open documents by using Office 2007, Office 2010, or Office 2013 on client computers that run Windows 7.
  B. Use the Get-MsolUser cmdlet with the ServiceStatus parameter.
  C. Search network shares for Office documents and export the results to a .log file.
  D. Search local computers for Office documents and export the results to a .csv file.
  A. Open documents by using Office 2007, Office 2010, or Office 2013 on client computers that run Windows 7.

  ---

  Telemetry Agents for all versions of Office collect the data of the most recently used documents, registered add-ins, and system and user information to upload to the shared folder. By opening documents by using Office 2007, Office 2010, or Office 2013 on client computers that run Windows 7, you allow the Telemetry Agents to collect the relevant data.

  References: https://technet.microsoft.com/en-us/library/jj863580.aspx#bkmk_howistelemetrydatacollected

• Question 260:

  You are the SharePoint administrator for a company's SharePoint Online tenant. The company merges with another company, and the number of users has grown 400 percent over the last month. You plan to hire SharePoint site collection

  administrators.

  The additional administrators must have permission to only manage site collections that you assign to them. You need to assign the correct permissions to the administrators.

  Which permission level should you grant to the administrators?

  A. Global admin
  B. SharePoint Online admin
  C. Site Collection admin
  D. Site admin
  E. User Management admin
  C. Site Collection admin

  ---

  Site collection administrator is a user with administrator permissions to manage a site collection.