Cisco 642-737 Online Practice Questions and Exam Preparation

Cisco 642-737 Online Questions & Answers

• Question 51:

  An engineer enabled client exclusion in the WLAN, but still sees a client failing EAP authentication every few seconds in the log. What other setting must be enabled for the exclusion to function?

  A. Excessive 802.11 Association Failures
  B. Excessive 802.11 Authentication Failures
  C. Excessive 802.1X Authentication Failures
  D. IP Theft or IP Reuse
  E. Excessive Web Authentication Failures
  C. Excessive 802.1X Authentication Failures

• Question 52:

  Refer to the exhibit.

  

  What does this Cisco Secure ACS v4.2 log indicate?

  A. The WLC is not configured as a client in the Cisco Secure ACS.
  B. The WLC is not configured as a server in the Cisco Secure ACS.
  C. Incorrect authentication exists between the WLC and Cisco Secure ACS.
  D. The wireless client is not configured as a client in the Cisco Secure ACS.
  E. Incorrect authentication exists between the wireless client and Cisco Secure ACS.
  C. Incorrect authentication exists between the WLC and Cisco Secure ACS.

• Question 53:

  Given a proper configuration of the Cisco WLC v7.0, what is the default username, password, and enable password to remotely access an associated AP?

  A. admin, admin, and Cisco
  B. admin, cisco, and Cisco
  C. none, cisco, and Cisco
  D. none, Cisco, and Cisco
  E. Cisco, Cisco, and Cisco
  F. lightweight APs do not allow remote access
  E. Cisco, Cisco, and Cisco

• Question 54:

  Refer to the exhibit.

  

  A WLAN with the SSID "Enterprise" is configured. Which rogue will be marked as malicious?

  A. a rogue with no clients, broadcasting the SSID "Enterprise" heard at -50dBm
  B. a rogue with two clients, broadcasting the SSID "Employee" heard at -50dBm
  C. a rogue with two clients, broadcasting the SSID "Enterprise" heard at -50dBm
  D. a rouge with two clients, broadcasting the SSID "Enterprise" heard at -80dBm
  C. a rogue with two clients, broadcasting the SSID "Enterprise" heard at -50dBm

• Question 55:

  For wireless NAC out-of-band operations, which protocol is used between the Cisco NAC Appliance Manager and the wireless controller to switch the wireless client from the quarantine VLAN to the access VLAN after the client has passed the NAC authentication and posture assessment process?

  A. RADIUS
  B. TACACS+
  C. SNMP
  D. SSL
  E. EAP
  C. SNMP

• Question 56:

  Which Cisco WLC v7.0 CLI family of commands helps to verify the PAC status for client association when using local-EAP?

  A. debug group
  B. debug dot1X
  C. show local-auth
  D. debug aaa
  E. debug capwap
  D. debug aaa

• Question 57:

  What are the three methods that a Cisco AnyConnect v3.0 profile can be applied to a client device? (Choose three.)

  A. Cisco ASA version 8.2 and later can instruct users to open a specific page on the ASA web interface, from where NAM and user profiles can be downloaded.
  B. The DHCP option for using a TFTP server automates where NAM and user profiles can be downloaded.
  C. The administrator can manually copy the profile to the correct location on the client PC.
  D. The administrator can also use the predeploy installer (MSI on Windows) with the generated profiles.
  E. When loaded, the Posture Module can verify and request the user to load the latest profile.
  F. The administrator can use the Cisco AnyConnect v3.0 server feature to allow clients to authenticate with the AAA server and then download the appropriate profile to their client PC.
  A. Cisco ASA version 8.2 and later can instruct users to open a specific page on the ASA web interface, from where NAM and user profiles can be downloaded.
  C. The administrator can manually copy the profile to the correct location on the client PC.
  D. The administrator can also use the predeploy installer (MSI on Windows) with the generated profiles.

• Question 58:

  Which statement correctly describes the relationship between the foreign and anchor controllers when used for guest access?

  A. The foreign controller will load balance in round-robin fashion starting with the highest IP address anchor controller to the lowest IP address anchor controller.
  B. The foreign controller will load balance in round-robin fashion starting with the lowest IP address anchor controller to the highest IP address anchor controller.
  C. The foreign controller will load balance in round-robin fashion starting with the highest MAC address anchor controller to the lowest MAC address anchor controller.
  D. The foreign controller will load balance in round-robin fashion starting with the lowest MAC address anchor controller to the highest MAC address anchor controller.
  B. The foreign controller will load balance in round-robin fashion starting with the lowest IP address anchor controller to the highest IP address anchor controller.

• Question 59:

  Refer to the exhibit.

  

  Why is the client failing to authenticate with the AAA server?

  A. excessive number of authentication attempts for username
  B. incorrect read/write credentials for username
  C. incorrect IP address being sent by client
  D. incorrect authentication for username
  D. incorrect authentication for username

• Question 60:

  When deploying wIPS, which protocol is used to communicate between the Cisco WLC v7.0 and the MSE?

  A. SNMP
  B. HTTPS
  C. CAPWAP
  D. SOAP and XML
  E. NMSP
  E. NMSP