Cisco 642-737 Online Practice Questions and Exam Preparation

Cisco 642-737 Online Questions & Answers

• Question 71:

  An engineer is adding client entries with the controller addresses to ACS. What IP address format would be used to add the class C network 192.168.1.0 in a single entry?

  A. 192.168.1.0/24
  B. 192.168.1.0 255.255.255.0
  C. 192.168.1.*
  D. 192.168.1.0-255
  E. 192.168.1.0-192.168.1.255
  C. 192.168.1.*

• Question 72:

  The Cisco WLC v7.0 is configured for external authentication of the management access to the WLC itself using the Cisco Secure ACS v4.2. The management user is limited to read access for all menu options except for full read/write access to the WLAN menu options.

  Which two items are required in the Cisco Secure ACS network configuration to enable correct AAA? (Choose two.)

  A. AP IP address
  B. WLC virtual IP address
  C. WLC management IP address
  D. WLC AP management IP address
  E. hostname matching the WLC case-sensitive name
  F. authentication using RADIUS
  G. authentication using TACACS+
  C. WLC management IP address
  G. authentication using TACACS+

• Question 73:

  Which three actions must be completed to enable collaboration between a Cisco WLC and Cisco IPS? (Choose three.)

  A. Create a user account on the Cisco IPS for the Cisco WLC.
  B. Define the Cisco WLC as an allowed host on the Cisco IPS.
  C. Define the Cisco IPS as a CIDS sensor on the Cisco WLC.
  D. Create a Cisco IPS profile on the Cisco WLC.
  E. Configure the Cisco WLC to update the shunned client list from the Cisco IPS.
  F. Define a Cisco IPS profile to the WLAN in the Cisco WLC.
  A. Create a user account on the Cisco IPS for the Cisco WLC.
  B. Define the Cisco WLC as an allowed host on the Cisco IPS.
  C. Define the Cisco IPS as a CIDS sensor on the Cisco WLC.

• Question 74:

  Which answer best describes the implementation of IBN using the Cisco WLC v7.0 and Cisco Secure ACS v4.2?

  A. Configure the ACS for AAA override and attributes. Configure the WLC for RADIUS server.
  B. Configure the ACS for AAA override and attributes. Configure the WLC for RADIUS server and attributes.
  C. Configure the ACS for attributes. Configure the WLC for RADIUS server and AAA override.
  D. Configure the ACS for attributes. Configure the WLC for RADIUS server, AAA override, and attributes.
  D. Configure the ACS for attributes. Configure the WLC for RADIUS server, AAA override, and attributes.

• Question 75:

  An engineer is troubleshooting a FlexConnect authentication to a local RADIUS server. What debug command can discover the issue on the controller?

  A. debug lwapp reap
  B. debug dot11 mgmtmsg
  C. debug hreapaaa
  D. debug lwapp reap mgmt
  C. debug hreapaaa

• Question 76:

  What NAC appliance component is configured to create user roles, meet remediation requirements, and handle checking for device compliance?

  A. NGS
  B. NAA
  C. NAS
  D. NAM
  D. NAM

• Question 77:

  A network engineer is troubleshooting connectivity issues within the Cisco WCS. Which message level setting is recommended to collect the most detailed logs?

  A. error
  B. trace
  C. debug
  D. all
  E. informational
  F. diag
  B. trace

• Question 78:

  Which two entries can be used in the Cisco Secure ACS AAA network configuration setup for IP address 192.168.1.1 to provide RADIUS authentication for the network node? (Choose two.)

  A. 192.168.1.1-10
  B. 192.168.1.0
  C. 192.168.1.0 0.0.0.255
  D. 192.168.1.255
  E. 192.168.1.*
  A. 192.168.1.1-10
  E. 192.168.1.*

• Question 79:

  All users on one of the two guest WLANs are failing to connect after a configuration change was made to a controller. What is the cause of the outage?

  A. The interface or VLAN of the anchor controller and foreign controller no longer match.
  B. The configuration of the failing WLAN no longer matches the foreign controllers.
  C. The address of the NAC guest server has been changed.
  D. The DHCP server on the foreign controller was changed.
  B. The configuration of the failing WLAN no longer matches the foreign controllers.

• Question 80:

  A network administrator is assigning a one-to-one association for VLAN to wireless WLAN or SSID. Given the implementation of a Cisco 2500 Series controller using v7.0, how many WLANs can be created?

  A. 8
  B. 16
  C. 32
  D. 64
  E. 128
  F. 254
  G. 512
  B. 16