Cisco 642-732 Online Practice Questions and Exam Preparation

Cisco 642-732 Online Questions & Answers

• Question 161:

  A customer requesting a site survey requires hidden APs, basic data coverage, and guest access in a multifloor environment. Which industry vertical best describes this customer?

  A. warehousing
  B. health care
  C. hospitality
  D. manufacturing
  C. hospitality

• Question 162:

  A company has requested an indoor wireless survey in a multi-tenant building for 2.4GHz data and 5GHz voice services. Data clients will require three spatial streams and 4x4 MIMO technology. What is the Cisco recommended Access Point for performing this survey?

  A. 600
  B. 1600
  C. 2600
  D. 3600
  D. 3600

• Question 163:

  Which hop count is Cisco's maximum recommended for a client in a wireless Mesh network?

  A. 2
  B. 4
  C. 6
  D. 8
  B. 4

• Question 164:

  What are the most appropriate channels for an 802.11a/n VoWLAN survey and deployment in the FCC domain?

  A. 4 channels of UNII-1
  B. 8 channels of UNII-1, and UNII-2
  C. 8 channels of UNII-1, and UNII-3
  D. 15 channels of UNII-2, and UNII-2 extended
  E. 23 channels of UNII-1, UNII-2, UNII-2 extended, and UNII-3
  F. 24 channels of UNII-1, UNII-2, UNII-2 extended, UNII-3, and ISM
  C. 8 channels of UNII-1, and UNII-3

• Question 165:

  A site survey proposes placement of new APs to replace older APs. Which three options are three potential placements of the new APs? (Choose three.)

  A. Use the old placements where they are near the proposed location.
  B. Add APs from the site survey that have no APs in older installation.
  C. Mount new APs on the exact location according to site survey report.
  D. Use network cables and mounting brackets from the older installation.
  E. Deploy APs every 4000 square feet.
  F. Deploy APs every 3000 square feet.
  A. Use the old placements where they are near the proposed location.
  B. Add APs from the site survey that have no APs in older installation.
  C. Mount new APs on the exact location according to site survey report.

• Question 166:

  When designing a WLAN, AP placement is important. How would you rank the density of APs needed to support location services versus data and voice services?

  A. Voice and data services both require a higher density of APs than location services.
  B. Data services have a lower density of APs compared to location services, but more than voice.
  C. Voice services have the highest density of APs over location and data services.
  D. Data services have the lowest density of APs compared to location services, which has the highest density.
  D. Data services have the lowest density of APs compared to location services, which has the highest density.

• Question 167:

  A wireless engineer is gathering equipment to perform a point-to-point bridge survey. What three pieces of equipment should be used? (Choose three.)

  A. 3502i with dual band directional antennas
  B. 3502e with AIR-ANT2460NP-R
  C. 1132 with a 10dBi Yagi
  D. 1552e with three AIR-ANT2547-N=
  E. 1552e with AIR-ANT2588P3M-N=
  F. 1310 with internal antenna
  G. 1142 Series with internal antennas
  B. 3502e with AIR-ANT2460NP-R
  E. 1552e with AIR-ANT2588P3M-N=
  F. 1310 with internal antenna

• Question 168:

  An engineer is conducting a VoWLAN survey for voice clients with a max power of 40 mW. What power level should the engineer set the AP to during the survey?

  A. 5 mW
  B. 10 mW
  C. 20 mW
  D. 30 mW
  E. 40 mW
  C. 20 mW

• Question 169:

  An initial meeting has been scheduled for a proposed site survey of a customer headquarters location. Which four types of information would be valuable to collect prior to the formal kickoff meeting? (Choose four.)

  A. Site type (urban, suburban, external environmental sensitivity, etc.)
  B. Business type
  C. Number of years in business
  D. Number of customers
  E. Products and services produced
  F. Building type
  G. Plans for branch expansion
  H. Number of branch locations
  A. Site type (urban, suburban, external environmental sensitivity, etc.)
  B. Business type
  E. Products and services produced
  F. Building type

• Question 170:

  A Cisco engineer is troubleshooting a Cisco 1250 series 802.11n access point with a maximum throughput on 2.4 GHz that is limited to 72 Mbps. Why might the AP be operating in a limited capacity?

  A. the switch providing PoE supports 802.3af
  B. the switch providing PoE supports 802.3at
  C. the 2.4 GHz bandwidth is 20 MHz wide
  D. the 2.4 GHz is 40 MHz wide
  A. the switch providing PoE supports 802.3af