Cisco 500-170 Online Practice Questions and Exam Preparation

Cisco 500-170 Online Questions & Answers

• Question 31:

  Which four are components of Cisco UCS stateless computing? (Choose four)

  A. Utilization of service profiles to apply parameter settings from server hardware
  B. Elements of a server's personality, which may be included in a service profile, include firmware versions, UUID, MAC Addresses, World Wide Names, and boot settings.
  C. A one to one mapping of an application to a server
  D. Boot from SAN
  E. Every physical server in a Cisco UCS instance should remain anonymous until you associate a service profile with it
  F. A one to one mapping to the identity information burned into the hardware (mac addresses, etc).
  A. Utilization of service profiles to apply parameter settings from server hardware
  B. Elements of a server's personality, which may be included in a service profile, include firmware versions, UUID, MAC Addresses, World Wide Names, and boot settings.
  D. Boot from SAN
  E. Every physical server in a Cisco UCS instance should remain anonymous until you associate a service profile with it

• Question 32:

  What are the two expected outputs of network interface show? (Choose two.)

  A. IP addresses of NAS and iSCSI logical interfaces
  B. iSCSI IQNs
  C. Namespace of SAN logical interfaces
  D. System WW node name
  E. WW port names of Fibre Channel and FCoE logical interfaces
  A. IP addresses of NAS and iSCSI logical interfaces
  E. WW port names of Fibre Channel and FCoE logical interfaces

• Question 33:

  Which VMware vSphere feature allocates and balances computing capacity dynamically across collections of hardware resources for virtual machines?

  A. vSphere Fault Tolerance (FT)
  B. vSphere High Availability (HA)
  C. vSphere Distributed Resource Scheduler (DRS)
  D. vSphere AutoDeploy
  C. vSphere Distributed Resource Scheduler (DRS)

• Question 34:

  For FI 6248 with a GEM module, what is the possible assignment of ports for native Fibre Channel and Ethernet?

  A. Eth ports: 1-21, 33-48, Fibre Channel ports. 22-32
  B. Eth ports: 1-18, 33-40, Fibre Channel ports. 19-32, 41-48
  C. Eth ports: 1-21, Fibre Channel ports. 22-48
  D. Eth ports: 1-16, 41-48, Fibre Channel ports. 17-40
  B. Eth ports: 1-18, 33-40, Fibre Channel ports. 19-32, 41-48

• Question 35:

  Which traffic through a UCS 6200 cluster can be in Active-Standby mode?

  A. Data traffic only
  B. FHRP
  C. Data and management traffic
  D. Management traffic only
  D. Management traffic only

• Question 36:

  What is the maximum aggregate traffic available to a half-width UCS B-Series blade in a 5108 Chassis with two 2208XP Fabric Extenders, Cisco VIC 1240 adapter, and Cisco Port Expander Card for VIC 1240?

  A. 40 Gb
  B. 80 Gb
  C. 120 Gb
  D. 320 Gb
  B. 80 Gb

• Question 37:

  What is the NetApp recommended bit length that the SSL key should be?

  A. 512
  B. 768
  C. 1024
  D. 9216
  C. 1024

• Question 38:

  With Data ONTAP 8.2 or later, a two-node cluster has which two connections? (Choose two.)

  A. 2x connections for HA Pair storage failover
  B. 4x connections for HA Pair storage failover
  C. 2x Infiniband connections cross connected on each node for the Cluster interconnect
  D. 2x 10GbE Ethernet connections cross connected on each node for the Cluster interconnect
  E. 4x 10GbE Ethernet connections cross connected on each node for the Cluster interconnect
  A. 2x connections for HA Pair storage failover
  D. 2x 10GbE Ethernet connections cross connected on each node for the Cluster interconnect

• Question 39:

  In a FlexPod design, when can NetApp storage be directly connected to a Cisco UCS server?

  A. Never
  B. Always
  C. Only in a FlexPod Select design
  D. Only in a FlexPod Express design
  E. Only in a FlexPod DataCenter design
  C. Only in a FlexPod Select design

• Question 40:

  Which Microsoft Hyper-V and System Center VMM feature allows for creation of multiple VM networks on top of a logical network and allows for tenant use of overlapping IP addresses?

  A. Load Balancer Integration
  B. Network Virtualization
  C. VLAN-based configuration
  D. Stateless Transport Protocol
  B. Network Virtualization