Cisco 500-170 Online Practice Questions and Exam Preparation

Cisco 500-170 Online Questions & Answers

• Question 11:

  Refer to the exhibit.

  

  What would be the correct configuration for the ports labeled?

  A. vlan 35fcoe vsan 35int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint portchannel15switchport mode trunkswitchport trunk allowed vlan 35spanning- tree port type edge trunkint vfc15bind interface po15switchport trunk allowed vsan 35vsan databasevsan 35 interface vfc15
  B. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport access vlan 35int vfc15bind interface po15switchport trunk allowed vsan 45vsan databasevsan 45 interface vfc15
  C. int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
  D. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vlan 35switchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
  E. int eth1/31-32channel-group 15 mode activeint po15switchport mode access vsan 45vsan databasevsan 45 interface po15
  A. vlan 35fcoe vsan 35int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint portchannel15switchport mode trunkswitchport trunk allowed vlan 35spanning- tree port type edge trunkint vfc15bind interface po15switchport trunk allowed vsan 35vsan databasevsan 35 interface vfc15

• Question 12:

  Cisco UCS Manager may be used to manage which four tasks within a Cisco UCS domain? (Choose four)

  A. Cisco UCS hardware including the chassis, servers, fabric interconnects, and i/o modules
  B. Cisco UCS resource management including WWN addresses, MAC addresses, UUIDs, and bandwidth
  C. Deployment of a Windows or Linux Operating system
  D. Management of non-Cisco x86 systems
  E. Network administration such as creating VLANs, uplink ports, port channels and LAN PIN groups
  F. SAN configuration tasks such as creating VSANs, QoS classes and definitions, and port channels.
  G. Deploy patches for software, such as an OS or an application
  H. Install software applications, such as databases, application server software, or web servers
  A. Cisco UCS hardware including the chassis, servers, fabric interconnects, and i/o modules
  B. Cisco UCS resource management including WWN addresses, MAC addresses, UUIDs, and bandwidth
  E. Network administration such as creating VLANs, uplink ports, port channels and LAN PIN groups
  F. SAN configuration tasks such as creating VSANs, QoS classes and definitions, and port channels.

• Question 13:

  What software program manages a NetApp storage controller with Data ONTAP 8.1 or later?

  A. FilerView
  B. OnCommand System Manager
  C. UCS Manager
  D. Web Browser
  B. OnCommand System Manager

• Question 14:

  Before being added to an interface group, interfaces must be in what state?

  A. Active
  B. Down
  C. Maintenance
  D. Up
  B. Down

• Question 15:

  Which four VLANs can be configured on UCS platform? (Choose four)

  A. 1
  B. 199
  C. 1001
  D. 3968
  E. 4001
  F. 4047
  G. 4090
  H. 4096
  A. 1
  B. 199
  C. 1001
  G. 4090

• Question 16:

  Clustered Data ONTAP supports which three types of disk drives? (Choose three)

  A. HAS
  B. InfiniBand
  C. SAS
  D. SATA
  E. SSD
  C. SAS
  D. SATA
  E. SSD

• Question 17:

  Which four are features of VMware vSphere as part of a FlexPod Solution? (Choose four)

  A. Workload mobility via vMotion
  B. High Availability through vSphere clustering technology providing virtual machine resiliency in the event of a physical server or guest OS failures
  C. Storage thin provisioning capabilities
  D. Dynamic workload distribution for efficient resource utilization with Distributed Resource Scheduler (DRS)
  E. An improved virtual hard disk format called VHDX
  F. Improved support for Live Migration with no limits
  G. The ability to manage non-ESXi hypervisors such as Microsoft HyperV
  H. Support for NVGRE in the vNetwork Standard Switch (vSS)
  A. Workload mobility via vMotion
  B. High Availability through vSphere clustering technology providing virtual machine resiliency in the event of a physical server or guest OS failures
  C. Storage thin provisioning capabilities
  D. Dynamic workload distribution for efficient resource utilization with Distributed Resource Scheduler (DRS)

• Question 18:

  Which protocol is currently supported on the Nexus 1000V to support network isolation among virtual machines beyond traditional VLANs for cloud-scale networking?

  A. Stateless Transport Tunneling (STT)
  B. Overlay Transport Virtualization (OTV)
  C. Virtual Extensible Local Area Network (VXLAN)
  D. vPath
  C. Virtual Extensible Local Area Network (VXLAN)

• Question 19:

  Which Cisco Nexus switch is designed for low latency L2/L3 IP only networks?

  A. Nexus 5548
  B. Nexus 7000
  C. Nexus 3048
  D. Nexus 5596
  C. Nexus 3048

• Question 20:

  The FlexPod Data Center with VMware vSphere 5.1 solution utilizes a clustered file system that allows multiple hosts simultaneous read and write access to a single volume. What is the name of this file system?

  A. NTFS
  B. FAT
  C. VMFS
  D. VHDX
  C. VMFS