Cisco 351-080 Online Practice Questions and Exam Preparation

Cisco 351-080 Online Questions & Answers

• Question 91:

  Drag Drop

  Select and Place:

  

  

• Question 92:

  Which three parameters are carried by an iSCSI TCP session? (Choose three.)

  A. control messages
  B. SCSI commands
  C. parameters that specify redundant paths
  D. iSCSI PDUs
  E. primitive signals
  A. control messages
  B. SCSI commands
  D. iSCSI PDUs

• Question 93:

  Which capabilities are not supported in DCNM device manager?

  A. Manage SNMPv3 security access to switches
  B. Save and copy configuration files and software images
  C. Configure VLANs and Ethernet port channels
  D. Manage 2148T FEX, 2232PP FEX, and 2248TP FEX
  E. Configure FCoE
  C. Configure VLANs and Ethernet port channels

• Question 94:

  The persistent storage service (PSS) is used by which function?

  A. storage of log files across reloads of the system
  B. storage of license files in the backplane EEPROM
  C. storage of the process-specific state for stateful process recovery
  D. storage of core dump files from crashed processes
  C. storage of the process-specific state for stateful process recovery

• Question 95:

  A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called VM002. What configuration is required, and what other changes will need to be made? (Choose two.) VSM-PRI-188# 71thern vethernet 5 Vethernet5 is up Port description is VM001, Network Adapter 2 HardwarE. Virtual, address: 0050.56b0.001e (bia 0050.56b0.001e) Owner is VM "VM001", adapter is Network Adapter 2 Active on module 5 Vmware DVS port 484 Port-Profile is VM-vlan-10 Port mode is access VSM-PRI-188# 71thern vethernet 6 Vethernet6 is up Port description is VM002, Network Adapter 1 HardwarE. Virtual, address: 0050.56b0.0020 (bia 0050.56b0.0020) Owner is VM "VM002", adapter is Network Adapter 1 Active on module 5 Vmware DVS port 485 Port-Profile is VM-vlan-10 Port mode is access

  A. Monitor session 1 type span Source interface veth5 both Destination interface veth6 No shut
  B. monitor session 1 source vlan 10 destination interface veth6 no shut
  C. monitor session 1 type er-span source interface vlan 10 destination ip 10.1.1.10 no shut
  D. VM002 must be removed from the Nk1V
  E. Move VM002 to Module 5
  F. Restart the VEM on module 5
  A. Monitor session 1 type span Source interface veth5 both Destination interface veth6 No shut
  E. Move VM002 to Module 5

• Question 96:

  Which statement describes the XML management interface in Cisco NX-OS Software?

  A. The following XML-based NETCONF operations are supported in NX-OS SoftwarE. Close-session, copy-config, delete-config, and edit-config.
  B. The following XML-based NETCONF operations are supported in NX-OS SoftwarE. Close-session, copy-config, edit-config, and kill-session.
  C. NX-OS Software supports up to a maximum of 16 concurrent XML sessions.
  D. Only show commands are supported via the XML management interface in NX-OS Software.
  E. The NX-OS implementation of the XML-based NETCONF requires SSH to be used for communication with the device.
  E. The NX-OS implementation of the XML-based NETCONF requires SSH to be used for communication with the device.

• Question 97:

  What is the default vPC peer-keepalive timeout on the Cisco Nexus 7000 Series switch?

  A. 5 seconds
  B. 256 milliseconds
  C. 500 milliseconds
  D. 1 second
  D. 1 second

• Question 98:

  On a Cisco Nexus 7000, a CoPP can be applied separately to each VDC.

  A. True
  B. False
  B. False

• Question 99:

  Which type of port profile is used to dynamically instantiate vEth interface on the Cisco Nexus 5000 Series switch

  A. profile-veth
  B. vethernet
  C. vethinterface
  D. dynamic-interface
  B. vethernet

• Question 100:

  Refer to the exhibit.

  

  Given the displays from MDS-1 and MDS-2, which two options describe what will happen when they attempt a zone merge for VSAN 120? (Choose two.)

  A. The zone merge will complete with no warnings and each switch will contain three zones.
  B. The zone merge will fail because the zone set members are not identical.
  C. The zone merge will prompt the administrator to add zones ucs-1 and ucs-2 to the switches where they are missing.
  D. Zone merges are not permitted when running enhanced mode zoning.
  E. The zone merge will fail because the active zone set names are not identical.
  F. The zone merge will complete, but the administrator will be prompted to choose which zone set to make active.
  B. The zone merge will fail because the zone set members are not identical.
  E. The zone merge will fail because the active zone set names are not identical.