Cisco 350-401 Online Practice Questions and Exam Preparation

Cisco 350-401 Online Questions & Answers

• Question 431:

  When voice services are deployed over a wireless environment, which service must be disabled to ensure the quality of calls?

  A. Aggressive load balancing
  B. Dynamic transmit power control
  C. Priority queuing
  D. Fastlane
  A. Aggressive load balancing

  ---

  Explanation

  To have a successful voice deployment with 792x phones, not only do you need a professional site survey, you also need to make sure that the controller and the switched network are properly configured for voice.

  The controller has several settings for a proper voice configuration: Aggressive Load Balancing should be disabled.

  References:

  http://what-when-how.com/deploying-and-troubleshooting-cisco-wireless-lan-controllers/configuration-cisco-wireless-lan-controllers/

• Question 432:

  How do OSPF and EIGKP compare?

  A. OSPF and EIGRP us the same administrative distance.
  B. Both OSPF and EIGRP use the concept of areas.
  C. EIGRP shows an known routes, and OSPF shows successor and feasible successor routes.
  D. EIGRP shows successor and feasible successor routes, and OSPF shows all known routes.
  D. EIGRP shows successor and feasible successor routes, and OSPF shows all known routes.

• Question 433:

  What is used to perform OoS packet classification?

  A. the Options field in the Layer 3 header
  B. the Type field in the Layer 2 frame
  C. the Flags field in the Layer 3 header
  D. the TOS field in the Layer 3 header
  D. the TOS field in the Layer 3 header

  ---

  Explanation

  Type of service, when we talk about PACKET, means layer 3

• Question 434:

  A network engineer must configure a switch to allow remote access for all feasible protocols. Only a password must be requested for device authentication and all idle sessions must be terminated in 30 minutes.

  Which configuration must be applied?

  A. line vty 0 15 password cisco transport input telnet ssh exec-timeout 30 0
  B. line vty 0 15 password cisco transport input all exec-timeout 0 30
  C. username cisco privilege 15 cisco line vty 0 15 transport input telnet ssh login local exec-timeout 0 30
  D. line console 0 password cisco exec-timeout 30 0
  A. line vty 0 15 password cisco transport input telnet ssh exec-timeout 30 0

  ---

  Explanation

  exec-timeout minutes [seconds]

• Question 435:

  Refer to the exhibit.

  

  Which configuration allows Customer2 hosts to access the FTP server of Customer1 that has the IP address of 192.168.1.200?

  A. ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 global ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 global ip route 192.168.1.0 255.255.255.0 VlanlO ip route 172.16.1.0 255.255.255.0 Vlan20
  B. ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 Customer2 ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customerl
  C. ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 Customerl ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customer2
  D. ip route vrf Customerl 172.16.1.1 255.255.255.255 172.16.1.1 global ip route vrf Customer 192.168.1.200 255.255.255.0 192.168.1.1 global ip route 192.168.1.0 255.255.255.0 VlanlO ip route 172.16.1.0 255.255.255.0 Vlan20
  A. ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 global ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 global ip route 192.168.1.0 255.255.255.0 VlanlO ip route 172.16.1.0 255.255.255.0 Vlan20

  ---

  Explanation

  https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200158-Configure-Route-Leaking-between-Global-a.html

• Question 436:

  What does Call Admission Control require the client to send in order to reserve the bandwidth?

  A. SIP flow information
  B. Wi-Fi multimedia
  C. traffic specification
  D. VoIP media session awareness
  C. traffic specification

• Question 437:

  DRAG DROP

  Drag and drop the characteristic from the left onto the orchestration tools that they describe on the right.

  Select and Place:

  

  

  ---

  Ansible

  uses playbooks

  procedural

  Puppet uses a pull model declarative

• Question 438:

  Which feature is needed to maintain the IP address of a client when an inter-controller Layer 3 roam is performed between two WLCs that are using different mobility groups?

  A. interface groups
  B. RF groups
  C. AAA override
  D. auto anchor
  D. auto anchor

• Question 439:

  Based on the router's API output in JSON format below, which Python code will display the value of the "hostname" key?

  

  A. json_data = json.loads(response.text) print(json_data[response][0][hostname])
  B. json_data = response.json() print(json_data[`response'][0][`hostname'])
  C. json_data = response.json() print(json_data[`response'][family][hostname'])
  D. json_data = json.loads(response.text) print(json_data[`response'][`family'][`hostname'])
  B. json_data = response.json() print(json_data[`response'][0][`hostname'])

  ---

  Explanation

  the output was generated from an API get request using "requests" library.

  https://www.geeksforgeeks.org/response-json-python-requests/

• Question 440:

  Which description of an SD-Access wireless network infrastructure deployment is true?

  A. The access point is part of the fabric underlay.
  B. The WLC is part of the fabric underaly.
  C. The access point is part the fabirc overlay.
  D. The wireless client is part of the fabirc overlay.
  C. The access point is part the fabirc overlay.

  ---

  Explanation

  Access Points

  + AP is directly connected to FE (or to an extended node switch) + AP is part of Fabric overlay

  References:

  https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKEWN-2020.pdf