Cisco 350-401 Online Practice Questions and Exam Preparation

Cisco 350-401 Online Questions & Answers

• Question 1501:

  How do cloud deployments differ from on-prem deployments?

  A. Cloud deployments require longer implementation times than on-premises deployments
  B. Cloud deployments are more customizable than on-premises deployments.
  C. Cloud deployments require less frequent upgrades than on-premises deployments.
  D. Cloud deployments have lower upfront costs than on-premises deployments.
  D. Cloud deployments have lower upfront costs than on-premises deployments.

• Question 1502:

  How does a WLC achieve stateful switchover for APs and clients?

  A. The active WLC establishes a CAPWAP tunnel to the AP, and the standby WLC establishes a LWAPP tunnel to the AP.
  B. The active WLC establishes a CAPWAP tunnel with the AP, and the standby WLC copies the AP database and the client database from the active WLC.
  C. The active WLC establishes a CAPWAP tunnel with the AP and standby WLC to share the AP database information.
  D. The active and standby WLCs establish separate CAPWAP tunnels to the AP.
  C. The active WLC establishes a CAPWAP tunnel with the AP and standby WLC to share the AP database information.

  ---

  Explanation

  References:

  https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-7/High_Availability_DG.html

• Question 1503:

  A network engineer is configuring Flexible Netflow and enters these commands:

  1. Sampler Netflow1

  2. Mode random one-out-of 100

  3. Interface fastethernet 1/0

  4. Flow-sampler netflow1

  Which are two results of implementing this feature instead of traditional Netflow? (Choose two.)

  A. CPU and memory utilization are reduced.
  B. Only the flows of top 100 talkers are exported
  C. The data export flow is more secure.
  D. The number of packets to be analyzed are reduced
  E. The accuracy of the data to be analyzed is improved
  A. CPU and memory utilization are reduced.
  D. The number of packets to be analyzed are reduced

  ---

  Explanation

  Flow sampling reduces the CPU overhead of analyzing traffic with Flexible NetFlow by reducing the number of packets that are analyzed. Flow samplers are used to reduce the load on the device that is running by limiting the number of packets that are selected for analysis.

  https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/configuration/15-mt/fnf-15-mt-book/use-fnflow-redce-cpu.pdf

• Question 1504:

  Refer to the exhibit.

  

  What is the output of this code?

  A. 1st_item#######: 645298791871446 2nd_item_that_must_display: jlugyydt##
  B. 1st_item#######: 6452987918 2nd_item_that_m: jlugyydt##
  C. 1st_item#######: 8791871446 at_must_display: jlugyydt
  D. 645298791871446 ##jlugyydt
  B. 1st_item#######: 6452987918 2nd_item_that_m: jlugyydt##

  ---

  Explanation

  {:#<15} - This is adding # to the returned string to fill 15 characters. It does nothing if the string is greater than 15 characters.

  {:#<10} - This is adding # to the returned string to fill 10 characters. It does nothing if the string is greater than 10 characters.

• Question 1505:

  Refer to the exhibit.

  

  The connecting between SW1 and SW2 is not operational.

  Which two actions resolve the issue? (Choose two)

  A. configure switchport mode access on SW2
  B. configure switchport nonegotiate on SW2
  C. configure switchport mode trunk on SW2
  D. configure switchport nonegotiate on SW1
  E. configure switchport mode dynamic desirable on SW2
  C. configure switchport mode trunk on SW2
  E. configure switchport mode dynamic desirable on SW2

• Question 1506:

  When does Cisco DNA Center make changes to a device?

  A. when the device credentials are added
  B. when the network device is assigned to the site and device controllability is turned on
  C. when the network device is discovered and device controllability is turned on
  D. when a NETCONF port has been configured
  C. when the network device is discovered and device controllability is turned on

• Question 1507:

  Refer to the exhibit.

  

  What does the Python code accomplish?

  A. It configures interface e1/32 to be in an admin down state
  B. It generates a status code of 403 because the type is incorrect.
  C. It configures interface e1/32 to be in an err-disable state.
  D. It returns data in JSON-RPC format.
  A. It configures interface e1/32 to be in an admin down state

• Question 1508:

  SIMULATION

  Guidelines

  This is a lab item in which tasks will be performed on virtual devices.

  1. Refer to the Tasks tab to view the tasks for this lab item.

  2. Refer to the Topology tab to access the device console(s) and perform the tasks.

  3. Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.

  4. All necessary pre-configurations have been applied.

  5. Do not change the enable password or hostname for any device.

  6. Save your configurations to NVRAM before moving to the next item.

  7. Click Next at the bottom of the screen to submit this lab and move to the next question.

  8. When Next is clicked, the lab closes and cannot be reopened.

  Topology

  

  Tasks

  Configure R2 according to the topology to achieve these results:

  1. Configure eBGP using Loopback 0 for the router-id. Do not use the address-family command to accomplish this.

  2. Advertise R2's Loopback 100 and Loopback 200 networks to AS40 and AS60.

  R2

  

  

  

  R1

  

  

  

  

  

  

  

  

  

  

  R3

  

  

  

  

  

  A. See the solution below in Explanation.
  B. Place Holder
  C. Place Holder
  D. Place Holder
  A. See the solution below in Explanation.

  ---

  Explanation

  

  

  Verification:

  

• Question 1509:

  Refer to the exhibit.

  

  What is achieved by this Python script?

  A. It displays the output from show lldp neighbors into a standard output.
  B. It reads the neighbor count from show lldp neighbors into a dictionary list.
  C. It displays the Layer 3 neighbors from show lldp neighbors on the terminal screen.
  D. It reads the output from show lldp neighbors into an array object.
  B. It reads the neighbor count from show lldp neighbors into a dictionary list.

• Question 1510:

  Refer to the exhibit.

  

  A network engineer must configure NETCONF. After creating the configuration, the engineer gets output from the command show line, but not from show runningconfig.

  Which command completes the configuration?

  A. Device(config)# netconf max-sessions 100
  B. Device(config)# no netconf ssh acl 1
  C. Device(config)# netconf lock-time 500
  D. Device(config)# netconf max-message 1000
  D. Device(config)# netconf max-message 1000

  ---

  Explanation

  Option A : The valid range is 4 to 16 (X Option B : Disable netconf over sshv2 (X

  Option C : The valid range is 1 to 300 (X Option D : The valid range is 1 to 2147483. The default value is infinite

  Command: netconf max-message <1-2147483> Kbytes. The engineer gets output from the command show line, but not from show running-config, because max-message is too small, it is not enough for data of running-config.