Cisco 350-029 Online Practice Questions and Exam Preparation

Cisco 350-029 Online Questions & Answers

• Question 441:

  Two customer sites are connected to a service provider backbone through L2VPN. GRE is carrying L2VPN circuits across the backbone. Which part of the packet carries the information to route the L2VPN circuits?

  A. GRE header
  B. LDP header
  C. IP header
  D. Layer 2 packet header
  A. GRE header

• Question 442:

  When gateways are registering with a gatekeeper, the gatekeeper can be

  A. On the same subnet
  B. On a remote LAN
  C. In a different subnet
  D. Any of the above
  D. Any of the above

• Question 443:

  Which two statements best describe EtherChannel? (Choose two).

  A. EtherChannel technology helps aggregate traffic grouping multiple, full-duplex point-to-point links together
  B. EtherChannel technology is based on the 802.1 IEEE stand
  C. EtherChannel can aggregate up to 800 Mbps,8 Gbps,or 80Gbps of aggregate bandwidth for a Fast EtherChannel, Gigabit EtherChannel,or 10 Gigabit EtherChannel connection respectively.
  D. EtherChannel is defined for Rapid Spanning Tree for faster convergence.
  A. EtherChannel technology helps aggregate traffic grouping multiple, full-duplex point-to-point links together
  C. EtherChannel can aggregate up to 800 Mbps,8 Gbps,or 80Gbps of aggregate bandwidth for a Fast EtherChannel, Gigabit EtherChannel,or 10 Gigabit EtherChannel connection respectively.

• Question 444:

  What is the data encapsulation method for the VPLS virtual circuit (VC)?

  A. MAC over MPLS
  B. L2TPV3
  C. 802.1 QinQ
  D. Ethernet over MPLS
  E. GRE
  D. Ethernet over MPLS

• Question 445:

  router bgp 1 neighbor 1.1.1.1 remote-as 2

  The above bgp configuration has what effect on the configured router?

  A. Allows incoming TCP connections from 1.1.1.1 that are sourced from port 179
  B. Allows incoming TCP connections from 1.1.1.1 that are destined to port 179
  C. Allows incoming TCP connections sourced from port 179
  D. Allows incoming TCP connections from 1.1.1.1 and destined to or sourced from port 179
  E. Allows incoming TCP connections destined to port 179
  B. Allows incoming TCP connections from 1.1.1.1 that are destined to port 179

• Question 446:

  Which E3 alarm indicates that there could be an issue with the transmit signal with the local equipment?

  A. rxLoS
  B. rxLoF
  C. rxRAI
  D. txRAI
  E. txLoF
  F. txLoS
  C. rxRAI

• Question 447:

  You applied this ACL to the interface and several people reported that they were unable to access the network.

  ipv6 access-list webOnly permit tcp any 2001:DB8::/32 permit udp any 2001:DB8::/32 deny ipv6 any any

  Which answer explains why they were unable to access the network?

  A. The connections are stale. The users must close and restart their applications.
  B. DNS queries and replies are not working.
  C. The ACL is blocking the operation of the ND process.
  D. DHCP requests are not reaching to the DHCP server.
  C. The ACL is blocking the operation of the ND process.

• Question 448:

  The mechanisms for distributing LDP are:

  A. CEF and the FIB table
  B. UDP and IP
  C. A and B
  D. RSVP and CEF
  E. LDP and RSVP
  E. LDP and RSVP

• Question 449:

  Which three options are functions of the Cisco Service Control Engine? (Choose three.)

  A. intelligent inspection and control of IP packets
  B. application of session-level bandwidth shaping
  C. provisioning of access aggregation
  D. per-subscriber bandwidth management
  E. Implementation of VPN services
  A. intelligent inspection and control of IP packets
  B. application of session-level bandwidth shaping
  D. per-subscriber bandwidth management

• Question 450:

  How would you characterize the source and type in a denial of service attack on a router?

  A. By perform a show ip interface to see the type and source of the attack based upon the access- list matches
  B. By setting up an access-list to permit all ICMP, TCP, and UDP traffic with the log or log-input commands, then use the show access-list and show log commands to determine the type and source of attack
  C. By performing a show interface to see the transmitted load "txload" and receive load "rxload", if the interface utilization is not maxed out, there is no attack underway
  D. By applying an access-list to all incoming and outgoing interfaces, turning off route-cache on all interfaces, then, when telnetting into the router perform a debug IP packet detail
  B. By setting up an access-list to permit all ICMP, TCP, and UDP traffic with the log or log-input commands, then use the show access-list and show log commands to determine the type and source of attack