1. Home
  2. Cisco
  3. 300-710

Cisco 300-710 Online Practice Questions and Exam Preparation

300-710 Exam Details

  • Exam Code
    :300-710
  • Exam Name
    :Securing Networks with Cisco Firepower (SNCF)
  • Certification
    :CCNP Security
  • Vendor
    :Cisco
  • Total Questions
    :433 Q&As
  • Last Updated
    :May 24, 2026

Cisco 300-710 Online Questions & Answers

  • Question 321:

    An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of 10.10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format

    that provides an adequate amount of addresses on the network.

    What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?

    A. Delete and register the device to Cisco FMC.
    B. Update the IP addresses from IPV4 to IPV6 without deleting the device from cisco FMC.
    C. Format and register the device to Cisco FMC.
    D. Cisco FMC does not support devices that use IPv4 IP addresses.

  • Question 322:

    An administrator is configuring their transparent Cisco FTD device to receive ERSPAN traffic from multiple switches on a passive port, but the Cisco FTD is not processing the traffic. What is the problem?

    A. The switches do not have Layer 3 connectivity to the FTD device for GRE traffic transmission.
    B. The switches were not set up with a monitor session ID that matches the flow ID defined on the Cisco FTD.
    C. The Cisco FTD must be in routed mode to process ERSPAN traffic.
    D. The Cisco FTD must be configured with an ERSPAN port, not a passive port.

  • Question 323:

    A Cisco FTD device is running in transparent firewall mode with a VTEP bridge group member ingress interface. What must be considered by an engineer tasked with specifying a destination MAC address for a packet trace?

    A. The output format option for the packet logs is unavailable.
    B. Only the UDP packet type is supported.
    C. The destination MAC address is optional if a VLAN ID value is entered.
    D. The VLAN ID and destination MAC address are optional.

  • Question 324:

    A network administrator is trying to configure an access rule to allow access to a specific banking site over HTTPS.

    Which method must the administrator use to meet the requirement?

    A. Enable SSL decryption and specify the URL.
    B. Define the URL to be blocked and set the application to HTTP.
    C. Define the URL to be blocked and disable SSL inspection.
    D. Block the category of banking and define the application of WWW.

  • Question 325:

    An engineer is deploying a Cisco ASA Secure Firewall module. The engineer must be able to examine traffic without impacting the network, and the ASA has been deployed with a single context. Which ASA Secure Firewall module deployment mode must be implemented to meet the requirements?

    A. routed mode with inline tap monitor-only mode
    B. transparent mode with passive monitor-only mode
    C. transparent mode with inline tap monitor-only mode
    D. routed mode with passive monitor-only mode

  • Question 326:

    A network administrator reviews the file report for the last month and notices that all file types, except exe. show a disposition of unknown. What is the cause of this issue?

    A. The malware license has not been applied to the Cisco FTD.
    B. The Cisco FMC cannot reach the Internet to analyze files.
    C. A file policy has not been applied to the access policy.
    D. Only Spero file analysis is enabled.

  • Question 327:

    An organization has a compliance requirement to protect servers from clients, however, the clients and servers all reside on the same Layer 3 network. Without readdressing IP subnets for clients or servers, how is segmentation achieved?

    A. Change the IP addresses of the servers, while remaining on the same subnet.
    B. Deploy a firewall in routed mode between the clients and servers.
    C. Change the IP addresses of the clients, while remaining on the same subnet.
    D. Deploy a firewall in transparent mode between the clients and servers.

  • Question 328:

    Which two remediation options are available when Cisco FMC is integrated with Cisco ISE? (Choose two.)

    A. dynamic null route configured
    B. DHCP pool disablement
    C. quarantine
    D. port shutdown
    E. host shutdown

  • Question 329:

    Network users are experiencing intermittent issues with internet access. An engineer identified that the issue is being caused by NAT exhaustion. How must the engineer change the dynamic NAT configuration to provide internet access for more users without running out of resources?

    A. Define an additional static NAT for the network object in use.
    B. Configure fallthrough to interface PAT on the Advanced tab.
    C. Convert the dynamic auto NAT rule to dynamic manual NAT.
    D. Add an identity NAT rule to handle the overflow of users.

  • Question 330:

    Which firewall mode is Cisco Secure Firewall Threat Defense in when two physical interfaces are assigned to a named BVI?

    A. Routed
    B. Transparent
    C. In-line
    D. IPS only

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 300-710 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.