Cisco 300-360 Online Practice Questions and Exam Preparation

Cisco 300-360 Online Questions & Answers

• Question 141:

  What document must be kept current when a customer is conducting network maintenance?

  A. readiness report
  B. survey report
  C. installation report
  D. technical report
  C. installation report

• Question 142:

  Refer to the exhibit. Which two statements about Cisco Prime Infrastructure are true? (Choose two.)

  

  A. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
  B. It shows the map editor feature in Cisco Prime Infrastructure.
  C. It presents the recommended number of APs for the selected coverage area based on the selections made.
  D. Planning mode requires a special license in Cisco Prime Infrastructure.
  E. It shows the planning mode feature in Cisco Prime Infrastructure.
  A. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
  E. It shows the planning mode feature in Cisco Prime Infrastructure.

• Question 143:

  An engineer has been assigned the task of deciding the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?

  A. The edge of the cell should be -67 dBm.
  B. One AP should be deployed per 3000 square feet.
  C. The edge of the cell should be below 35 RSSI.
  D. The measurement should be done on the 2.4-GHz band.
  A. The edge of the cell should be -67 dBm.

• Question 144:

  A wireless network is being designed to support 802.11a/b/g/n clients. Which problem occurs when 802.11b clients are heard by APs?

  A. APs enable RTS/CTS.
  B. APs disable RTS/CTS.
  C. Clients are restricted to 802.11g data rates.
  D. Clients are restricted to 802.11b data rates.
  D. Clients are restricted to 802.11b data rates.

• Question 145:

  An engineer must design wireless coverage in thick-walled stairwells. Which information should the engineer refer to when determining where APs can be installed?

  A. Local or National Building Code
  B. IEEE
  C. BICSI TDMM
  D. Cisco Hardware Installation Guide
  A. Local or National Building Code

• Question 146:

  Which option is the minimum RSSI signal for a data WLAN?

  A. -65 dBm
  B. -67 dBm
  C. -72 dBm
  D. -80 dBm
  D. -80 dBm

• Question 147:

  You are designing a WLAN for 50 branch offices that require central management. Which controller architecture do you use?

  A. per-branch local controllers
  B. anchor controllers
  C. FlexConnect controllers
  D. autonomous access points
  C. FlexConnect controllers

• Question 148:

  An engineer plugs in a Cisco Aironet 2700 Series Access Point and it is running in low power. Which three power requirements should be verified? (Choose three.)

  A. 802.3ac compliant
  B. 802.3at compliant
  C. AP requires 43 VDC to function in full power.
  D. AIR-PWRINJ3 power injector should be used.
  E. AP requires 57 VDC to function in full power.
  F. AIR-PWRINJ4 power injector should be used.
  B. 802.3at compliant
  E. AP requires 57 VDC to function in full power.
  F. AIR-PWRINJ4 power injector should be used.

  ---

  The access point should be powered by any 802.3at compliant device.

  The recommended external power supply for the access point is the Cisco AIR-PWR-B power supply. The access point can also be powered by the following optional external power sources:

  ?Access point power injector (AIR-PWRINJ4)

  ?Any 802.3af compliant power injector is supported, but in this case the access point will dynamically shift from 3x4 to 3x3.

  

  Reference: http://www.cisco.com/c/en/us/td/docs/wireless/access_point/2700/quick/guide/ap2700getstart.html

• Question 149:

  A network engineer wants the DSCP marking to align with the 802.11e access category video. What will this marking be?

  A. 34
  B. AF31
  C. 4
  D. 5
  A. 34

• Question 150:

  A wireless engineer must improve the roaming performance of the handheld mobile video units. Which feature must be enabled in the controller?

  A. HT
  B. AVC
  C. PMF
  D. FT
  D. FT