Cisco 300-165 Online Practice Questions and Exam Preparation

Cisco 300-165 Online Questions & Answers

• Question 251:

  Which two items are services that are provided by Cisco Fabric Services? (Choose two.)

  A. RSA key pair distribution
  B. device alias distribution
  C. Kerberos proxy distribution
  D. DPVM configuration distribution
  E. VLAN database distribution
  B. device alias distribution
  D. DPVM configuration distribution

  ---

  Reference: http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080662ca8.html

• Question 252:

  How is a dynamic vNIC allocated?

  A. Dynamic vNICs are assigned to VMs in vCenter.
  B. Dynamic vNICs can only be bound to the service profile through an updating template.
  C. Dynamic vNICs are bound directly to a service profile.
  D. Dynamic vNICs are assigned by binding a port profile to the service profile.
  C. Dynamic vNICs are bound directly to a service profile.

  ---

  The dynamic vNIC connection policy determines how the connectivity between VMs and dynamic vNICs is configured. This policy is required for Cisco UCS domains that include servers with VIC adapters on which you have installed VMs and configured dynamic vNICs. Each dynamic vNIC connection policy includes an Ethernet adapter policy and designates the number of vNICs that can be configured for any server associated with a service profile that includes the policy.

  For VM-FEX that has all ports on a blade in standard mode, you need to use the VMware adapter policy.

  For VM-FEX that has at least one port on a blade in high-performance mode, use the VmwarePassThrough adapter policy or create a custom policy. If you need to create a custom policy, the resources provisioned need to equal the resource requirements of the guest OS that needs the most resources and for which you will be using high-performance mode. http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/vmware/gui/config_guide/b_GUI_VMware_VM-FEX_UCSM_Configuration_Guide/b_GUI_VMware_VM-FEX_UCSM_Configuration_Guide_chapter_010.html

• Question 253:

  Which three types of interfaces are required when implementing VXLAN on a Cisco Nexus 9000 Series Switch? (Choose three.)

  A. Ethernet
  B. overlay
  C. ACI
  D. loopback
  E. NVE
  F. management
  A. Ethernet
  D. loopback
  E. NVE

• Question 254:

  

  Refer to the exhibit. Which action can a user assigned to the noc璦dmin role perform?

  A. Modify a port channel interface.
  B. Clear the interface counters.
  C. Verify an ACL.
  D. Modify the AAA parameters.
  A. Modify a port channel interface.

• Question 255:

  Which protocol is used to exchange MAC address reachability between OTV-enabled switches?

  A. EIGRP
  B. IS-IS
  C. iBGP
  D. RIPv2
  B. IS-IS

  ---

  Reference: http://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/overlay-transport-virtualization-otv/white_paper_c11-702185.htmld

• Question 256:

  Refer to the command below. When configuring an SVS connection on the Cisco Nexus 5000 Series Switch, which device is being referenced as the remote IP address?

  nexus5500-2(config-svs-conn)# remote ip address 10.10.1.15 port 80 vrf management

  A. ESX or ESXi host
  B. vCenter
  C. vPC peer switch
  D. Cisco IMC management
  B. vCenter

  ---

  This command specifies the hostname or IP address for the vCenter Server. Optionally, specifies the port number and VRF. http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/layer2/6x/b_5500_Layer2_Config_6x/b_5500_Layer2_Config_602N12_chapter_010000.html

• Question 257:

  Which command should you ran to distribute NTP configuration changes by using Cisco Fabric Services?

  A. ntp distribute
  B. ntp server 1.2.3.4
  C. ntp commit
  D. ntp authenticate
  A. ntp distribute

  ---

  Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_2cfs.html#wp1419346

• Question 258:

  ipv6 access-list MY_ACL permit tcp 2001:cc1e:aaaa::/64 2001:cc1e:befe:cccc::/64 permit udp 2001:cc1e:bbbb::/64 2001:cc1e:befe:cccc::/64 interface ethernet 1/1 ipv6 address 2001:cc1e:befe:cccc::1/64 ipv6 traffic-filter MY_ACL in

  Refer to the exhibit. Only the ACL in the exhibit is applied on a VDC, and only the default VRF is used. In which two scenarios is traffic permitted? (Choose two.)

  A. TCP traffic from 2001:cc1e:aaaa::/64 to 2001:cc1e:befe:cccc:abcd/64
  B. GRE traffic from 2001:cc1e:befe:cccc::abcd/64 to 2001:cc1e:aaaa/64
  C. UDP traffic from 2001:cc1e:aaaa::/64 to 2001::cc1e:befe:cccc::abcd/64
  D. GRE traffic from 2001:cc1e:bbbb::/64 to 2001:cc1e:befe:cccc::abcd/64
  E. TCP traffic from 2001:cc1e:bbbb::/64 to 2001:cc1e:befe:cccc:abcd/64
  A. TCP traffic from 2001:cc1e:aaaa::/64 to 2001:cc1e:befe:cccc:abcd/64
  D. GRE traffic from 2001:cc1e:bbbb::/64 to 2001:cc1e:befe:cccc::abcd/64

• Question 259:

  What is the Overlay Transport Virtualization site VLAN used for?

  A. to facilitate communications between OTV edge devices within the site
  B. to allow multiple site AEDs to communicate with each other
  C. to detect devices at the site that are not capable of OTV
  D. to allow the join interfaces at different sites to communicate
  A. to facilitate communications between OTV edge devices within the site

• Question 260:

  Which two statements are true when performing a SPAN capture of traffic reaching the Supervisor CPU in order to troubleshoot control plane protocols in the tenant VDC? (Choose two.)

  A. The destination interface will also receive control plane traffic from other VDCs.
  B. The SPAN configuration must be added to the default or administrative VDC.
  C. SPAN only supports monitoring of ingress traffic to the supervisor.
  D. Captured traffic from the supervisor can be shown directly on the terminal.
  E. Only monitoring of egress traffic from the supervisor is possible.
  B. The SPAN configuration must be added to the default or administrative VDC.
  D. Captured traffic from the supervisor can be shown directly on the terminal.