Cisco 300-115 Online Practice Questions and Exam Preparation

Cisco 300-115 Online Questions & Answers

• Question 861:

  You are configuring Layer 2 Etherchannel,and you want a PAgP port channel to come up only if the device on the other end is sending negotiations. Which keyword must you use?

  A. atuo
  B. on
  C. active
  D. desirable
  A. atuo

• Question 862:

  Which four mandatory TLVs are valid? (Choose four.

  A. End of LLDPDU
  B. Chassis ID
  C. Port ID
  D. Time To Live
  E. VLAN ID
  F. System name ID
  G. Description ID
  A. End of LLDPDU
  B. Chassis ID
  C. Port ID
  D. Time To Live

• Question 863:

  What carries voice VLAN to a Cisco phone?

  A. SIP
  B. LLDP
  C. CDP
  D. SKINNY
  C. CDP

• Question 864:

  Which statement describes what a port that is configured as an access port does if it receives an 802.1Q tagged frame?

  A. It drops the frame.
  B. It passes the frame on to the VLAN that the frame is tagged for.
  C. It err-disables the port.
  D. It removes the tag and forwards the frame in the VLAN assigned to the port.
  A. It drops the frame.

• Question 865:

  Which results happens when a non-trunking port that is configured with BPDU guard is connected to a device that is transmitting?

  A. The port is moved into the spanning-tree blocking state.
  B. There port is error-disabled.
  C. A routing loop can occur on the network.
  D. The port transitions to the connected state.
  B. There port is error-disabled.

• Question 866:

  On which PVLAN type can host ports communicate with promiscuous ports?

  A. primary
  B. community
  C. promiscuous
  D. isolated
  C. promiscuous

• Question 867:

  Drag and Drop

  Select and Place:

  

  

• Question 868:

  Drag and Drop

  LLDP-TLV

  Select and Place:

  

  

• Question 869:

  Which feature prevents a newly-added switch from becoming the primary?

  A. BPDU filtering
  B. root guard
  C. loop guard D. BPDU guard
  B. root guard

• Question 870:

  You have been asked to install and configure a new switch in a customer network. Use the console access to the existing and new switches to configure and verify correct device configuration.

  

  Refer to the configuration. For which configured VLAN are untagged frames sent over trunk between SW1 and SW2?

  A. VLAN1
  B. VLAN 99
  C. VLAN 999
  D. VLAN 40
  E. VLAN 50
  F. VLAN 200
  G. VLAN 300
  B. VLAN 99

  ---

  The native VLAN is used for untagged frames sent along a trunk. By issuing the "show interface trunk" command on SW1 and SW2 we see the native VLAN is 99.