Cisco 300-080 Online Practice Questions and Exam Preparation

Cisco 300-080 Online Questions & Answers

• Question 221:

  Which Cisco Unified Communications Manager troubleshooting tool can be used to look at detailed specific events, such as dial plan digit analysis, as they die happening?

  A. traceroutes
  B. RTMT real-time trace
  C. Cisco Unified Communications Manager alerts
  D. Cisco Unified Dialed Number Analyzer
  E. RTMT performance log viewer
  F. syslog output
  B. RTMT real-time trace

• Question 222:

  Users are reporting intermittent poor audio quality on VoIP calls. Which configuration area requires troubleshooting?

  A. network QoS
  B. media resource
  C. call routing
  D. phone setup
  A. network QoS

• Question 223:

  When dialing any external SIP URI for a business-to-business call, an endpoint that is registered to the Cisco VCS Control fails to locate the remote endpoint. The same endpoint can successfully call another endpoint that is registered to the Cisco VCS Expressway. How do you resolve this issue?

  A. Add traversal call licensing on the Cisco VCS Expressway.
  B. Add traversal call licensing on the Cisco VCS Control.
  C. Add a multisite option to the endpoint.
  D. Configure a proper DNS zone on the Cisco VCS Expressway.
  E. Configure a traversal zone between the Cisco VCS Control and the Cisco VCS Expressway.
  F. Configure a SIP route pattern in Cisco Unified Communications Manager.
  D. Configure a proper DNS zone on the Cisco VCS Expressway.

• Question 224:

  Which two types of Cisco Unified Communications Manager trace files contain Call Processing information that is helpful for troubleshooting outbound and inbound calling issues? (Choose two.)

  A. Cisco Unified Communications Manager syslog trace
  B. Cisco Unified Communications Manager Dialed Number Analyzer trace
  C. Real Time Monitoring Tool Processes trace
  D. Cisco Unified Communications Manager SDL trace
  E. Cisco Unified Communications Manager Log4Jtrace
  F. Cisco Unified Communications Manager SDI trace
  D. Cisco Unified Communications Manager SDL trace
  F. Cisco Unified Communications Manager SDI trace

• Question 225:

  Which two behaviors are correct when Cisco Unified CM has a CallManager group that consists of two subscribers? (Choose two.)

  A. If a subscriber is rebooted, endpoint registrations switch to the other subscriber, then switch back when the rebooted subscriber is back in service.
  B. Endpoints attempt to register with both subscribers in a load-balanced method
  C. If a subscriber is rebooted, endpoints deregister until the rebooted subscriber is back in service
  D. Endpoints attempt to register with the bottom subscriber in the list
  E. Endpoints attempt to register with the top subscriber in the list
  A. If a subscriber is rebooted, endpoint registrations switch to the other subscriber, then switch back when the rebooted subscriber is back in service.
  E. Endpoints attempt to register with the top subscriber in the list

• Question 226:

  Which tool can you use to see SAF advertisements in Cisco Unified Communications Manager?

  A. Cisco Unified Real-Time Monitoring Tool
  B. show eigrp neighbors command
  C. debug eigrp commands
  D. Terminal Monitor
  A. Cisco Unified Real-Time Monitoring Tool

• Question 227:

  You have sites across a WAN and because of a recent change on the access control lists, your SIP phones are having registration issues. Which cause is likely?

  A. TCP/UDP 0506 is blocked by the ACL.
  B. TCP/UDP 5006 is blocked by the ACL.
  C. TCP/UDP 5060 is blocked by the ACL.
  D. TCP/UDP 6050 is blocked by the ACL.
  C. TCP/UDP 5060 is blocked by the ACL.

• Question 228:

  You try to register a new H.323 endpoint to a Cisco Expressway server, but the endpoint does not register correctly. You successfully check network connectivity and Expressway registration with other devices. Which issue and solution will resolve this registration problem?

  A. The new endpoint has not been assigned with the correct registration domain on the endpoint.
  B. Cisco Expressway Server H.323 service must be restarted to activate the new endpoint.
  C. The registration Policy is set to "Allow List" and the newly added endpoint has to be added to the list, because only listed devices are allowed to register
  D. The Registration Policy is set to "Deny List" so all new endpoints are rejected. Set the Policy to "Allow List" so that the endpoint can register themselves and then reassigned the "Deny List" Setting for security reasons.
  C. The registration Policy is set to "Allow List" and the newly added endpoint has to be added to the list, because only listed devices are allowed to register

• Question 229:

  Which three troubleshooting tools are available on Cisco Unified Communications Manager? (Choose three.)

  A. CLI
  B. SDL and SDI trace
  C. Netcool
  D. alarms
  E. SCCP troubleshooting tools
  F. RTMT
  B. SDL and SDI trace
  D. alarms
  F. RTMT

• Question 230:

  You have installed a Cisco Unified IP 8831 Conference phone that is failing to register. Which two actions must you take to troubleshoot the problem? (Choose Two)

  A. Verify that RJ-11 cable is plugged into the PC port.
  B. Verify that the Phones network can access the option 150 server.
  C. Disable HSRP on the access layer switch.
  D. Verify that the correct drivers are installed on the switch port of the phone.
  E. Verify that the switch port of the phone is enabled.
  F. Check the RJ-65 cable.
  B. Verify that the Phones network can access the option 150 server.
  E. Verify that the switch port of the phone is enabled.