VMware 2V0-41.20 Online Practice Questions and Exam Preparation

VMware 2V0-41.20 Online Questions & Answers

• Question 71:

  How does Traceflow tool identify issues in a network?

  A. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
  B. Compares the management plane configuration states containing control plane traffic and error reporting from transport node agents.
  C. Injects synthetic traffic into the data plane and observes the results in the control plane.
  D. Injects ICMP traffic into the data plane and observes the results in the control plane.
  C. Injects synthetic traffic into the data plane and observes the results in the control plane.

• Question 72:

  An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.

  In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)

  A. Advertise All LB SNAT IP Routes
  B. All Static Routes
  C. Information
  D. Advertise All LB VIP Routes
  E. Advertise All NAT Routes
  A. Advertise All LB SNAT IP Routes
  D. Advertise All LB VIP Routes

  ---

  https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95A7-7645BA562D62.html

• Question 73:

  What are three characteristics of a transport zone? (Choose three.)

  A. defines the potential reach of transport nodes
  B. configured with a Single N-VDS
  C. defines the scope and reachability of a Segment
  D. configured with multiple N-VDS
  E. optional for creating a segment
  A. defines the potential reach of transport nodes
  B. configured with a Single N-VDS
  C. defines the scope and reachability of a Segment

• Question 74:

  Which discovery protocol is supported for hypervisor transport nodes?

  A. Adobe Real-time CDP
  B. Neighbor Discovery Protocol
  C. Cisco Discovery Protocol
  D. Link Layer Discovery Protocol
  D. Link Layer Discovery Protocol

• Question 75:

  When running nsxcli on an ESXi host, which command will show the Replication mode?

  A. get logical-switch status
  B. get logical-switch
  C. get logical-switches
  D. get logical-switch status
  B. get logical-switch

  ---

  https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20logical-switch%20%3Clogical-switch-id%3E%202

• Question 76:

  Which log is used to see a failed NSX-T installation of a VIB package on ESXi transport nodes?

  A. /var/l og/hostd. log
  B. /var/log/vmware/eam/eam.log
  C. /var/log/esxupdate.log
  D. /var/log/syslog.log
  D. /var/log/syslog.log

• Question 77:

  Which three teaming policy modes are supported by NSX-T Data Center? (Choose three.)

  A. Destination MAC
  B. Load Balanced Source IP
  C. Failover Order
  D. Destination Port
  E. Load Balanced Source MAC
  F. Load Balanced Source
  C. Failover Order
  E. Load Balanced Source MAC
  F. Load Balanced Source

• Question 78:

  An NSX administrator would like to configure syslog for a KVM transport node.

  Which host log files could be exported to a remote syslog server?

  A. /var/log/vmware/nsx-syslog
  B. /var/log/cfgAgent.log
  C. /var/log/nsx-audit.log
  D. /var/log/cloudnet/nsx-ccp.log
  A. /var/log/vmware/nsx-syslog

• Question 79:

  Which profile must be attached to the ESXi cluster to prepare the host for NSX-T Data Center?

  A. Transport Node Profile
  B. Uplink Profile
  C. Switching Profile
  D. Host Profile
  A. Transport Node Profile

• Question 80:

  An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600. Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?

  A. esxcli network diag ping -H
  B. vmkping ++netstack=geneve -d -s 1572
  C. vmkping ++netstack=vxlan-d -s 1572
  D. esxcli network diag ping -I vmk0 -H
  C. vmkping ++netstack=vxlan-d -s 1572

  ---

  https://kb.vmware.com/s/article/1003728