VMware 2V0-41.20 Online Practice Questions and Exam Preparation

VMware 2V0-41.20 Online Questions & Answers

• Question 41:

  Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)

  A. can have a maximum of 8 edge nodes
  B. must have only active-active edge nodes
  C. can have a maximum of 10 edge nodes
  D. can contain multiple types of edge nodes (VM or bare metal)
  E. must contain only one type of edge nodes (VM or bare metal)
  C. can have a maximum of 10 edge nodes
  D. can contain multiple types of edge nodes (VM or bare metal)

  ---

  https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62- 8E8D-43CC-92E0-E8D72E198D5A.html

• Question 42:

  Which TraceFlow traffic type should an NSX administrator use for validating connectivity between App and DB virtual machines that reside on different segments?

  A. Multicast
  B. Anycast
  C. Unicast
  D. Broadcast
  C. Unicast

• Question 43:

  What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN-backed logical switch?

  A. Service interface
  B. Loopback Router Port
  C. Downlink interface
  D. VLAN Uplink
  A. Service interface

  ---

  "The service interface is a special-purpose port to enable services for mainly VLAN-based networks. North-south service insertion is another use case that requires a service interface to connect a partner appliance and redirect north-south traffic for partner services. Service interfaces are supported on both active-standby Tier-0 logical routers and Tier-1 routers. Firewall, NAT, and VPNs are supported on this interface. The service interface is also a downlink"

• Question 44:

  An NSX Administrator has created a segment named WEB-LS from the NSX UI and noticed the segment is not realized on the KVM Transport node.

  What are two possible causes for this issue? (Choose two.)

  A. The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
  B. Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.
  C. The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
  D. The virtual machines running on the KVM Transport Node are not connected to the VDS.
  E. The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.
  B. Since the Compute Manager is disconnected in NSX UI, the WEB-LS segment will not be realized on the KVM Transport Node.
  E. The virtual machines running on the KVM Transport Node are not connected to the WEB-LS Segment.

• Question 45:

  Which tool could be used to configure BGP on a Tier-0 Gateway?

  A. PowerShell
  B. API
  C. ESX CLI
  D. NSX CLI
  D. NSX CLI

• Question 46:

  Which statement Is true regarding the audit user account? (Choose two.)

  A. The admin user must set the password for the audit account to log in to NSX Manager.
  B. The administrator must run the set audit user password command.
  C. The audit user has read-write access to the NSX Manager.
  D. The audit user is disabled by default and must be enabled to log in to the NSX Manager.
  E. The administrator must run the set user audit password command.
  A. The admin user must set the password for the audit account to log in to NSX Manager.
  E. The administrator must run the set user audit password command.

• Question 47:

  Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?

  A. set cli ssh timeout 0
  B. set esxcli ssh session off
  C. set cli-timeout 0
  D. nsxcli ssh session on
  C. set cli-timeout 0

• Question 48:

  Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?

  A. get host-switch tunnels
  B. get transport-node tunnel status
  C. get host-switch tunnel status
  D. get transport-node tunnel state
  A. get host-switch tunnels

  ---

  https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20host-switch%20%3Chost-switch-name%3E%20tunnels

• Question 49:

  Which three functions require a Services Router (SR) component on an Edge node? (Choose three.)

  A. Service Insertion
  B. Distributed Routing
  C. Packet Forwarding
  D. Gateway Firewall
  E. Distributed Firewall
  F. Virtual Private Network
  A. Service Insertion
  D. Gateway Firewall
  F. Virtual Private Network

• Question 50:

  Which command is used to change the NSX CU administrator password?

  A. set user admin password old-password
  B. set user admin password
  C. set user administrator password
  D. set user administrator password old-password
  A. set user admin password old-password

  ---

  To change the password of an account run:set user admin password my-new-pwd old-password my-old- pwd