Cisco 210-065 Online Practice Questions and Exam Preparation

Cisco 210-065 Online Questions & Answers

• Question 321:

  Which standard will support call forwarding?

  A. H.450.3
  B. H.323
  C. RFC 2833
  D. H.450.2
  A. H.450.3

• Question 322:

  Refer to the exhibit.

  

  The numbers on the floor plan represent the horizontal average lux readings for nine different room areas. Considering Cisco best practices, what can you conclude about the lighting conditions?

  A. Only three areas meet the room lighting levels that are recommended by Cisco.
  B. Only three areas do not meet the room lighting levels that are recommended by Cisco.
  C. All areas meet the room lighting levels that are recommended by Cisco.
  D. The areas do not meet the room lighting levels that are recommended by Cisco.
  B. Only three areas do not meet the room lighting levels that are recommended by Cisco.

• Question 323:

  Which two additional items can be configured for an endpoint to register with the Cisco TelePresence Video Communication Server for H.323 to function correctly? (Choose two.)

  A. unique system ID
  B. unique H.323 ID
  C. unique DNS entry ID
  D. unique E.164 alias
  E. unique real-time transport protocol port numbers
  F. unique NTP server IPv4 address
  B. unique H.323 ID
  D. unique E.164 alias

• Question 324:

  An engineer deployed two Cisco TelePresence MCU 5320 Servers in a stacked deployment. Each server has 20 HD Port licenses installed. During a 20-party 720p 30-fps conference, eight additional parties attempt to join the conference.

  What are the two characteristics of this scenario? (Choose two.)

  A. The Cisco 5320 MCU in a stacked deployment is capable of supporting 720p 30-fps without traditional cascading.
  B. When the 21st party joins, the call is declined because all ports are already in use on the first Cisco TelePresence 5320 MCU.
  C. The 21st party is cascaded into the conference, and the 22nd and additional parties are declined due to the overutilization of resources.
  D. the additional conference attendees are able to join the conference in the same manner and layout configuration that they could join a single bridge that was able to handle all 28 parties.
  E. The Cisco TelePresence MCU 5320 is capable of supporting a maximum of twenty 720p 30-fps calls when deployed in a stackable configuration, because each MCU is capable of managing only ten 720p 30-fps attendees.
  F. The conference is auto-balanced and resources are re-optimized via the MCU API. Parties 1 through 19 are hosted on the first MCU, and parties 20 through 28 are cascaded to the second MCU using an additional port on each MCU for the cascading.
  G. The additional eight parties are cascaded into the conference on the second 5320 MCU, and an additional port license is used on each MCU to facilitate the bridging between the MCUs.
  D. the additional conference attendees are able to join the conference in the same manner and layout configuration that they could join a single bridge that was able to handle all 28 parties.
  G. The additional eight parties are cascaded into the conference on the second 5320 MCU, and an additional port license is used on each MCU to facilitate the bridging between the MCUs.

• Question 325:

  Which command causes a Cisco VCS to drop registrations for currently registered endpoints only if they are not currently in a call?

  A. xConfiguration SystemUnit Maintenance Mode: Off
  B. xConfiguration SystemUnit Maintenance Mode: On
  C. xConfiguration Zones LocalZone DefaultSubZone Registrations: "Deny"
  D. xConfiguration Registration RestrictionPolicy Mode: "DenyList"
  B. xConfiguration SystemUnit Maintenance Mode: On

• Question 326:

  Which two methods can be used to retrieve the status of a Cisco TelePresence codec endpoint? (Choose two.)

  A. From the codec web GUI, choose Troubleshooting > System Status.
  B. From the codec web GUI, choose Diagnostics > System Status.
  C. From the codec web GUI, choose Configuration > System Status.
  D. Run the xstatus command from the CLI.
  E. Run the xcommand status command from the CLI.
  C. From the codec web GUI, choose Configuration > System Status.
  D. Run the xstatus command from the CLI.

• Question 327:

  Refer to the exhibit.

  

  Which Cisco Prime Collaboration capabilities are shown?

  A. Endpoint and system inventory reporting
  B. Proactive monitoring and alerts for video endpoints faults
  C. End-to-end network path troubleshooting
  D. Real-time monitoring and alerts for video endpoints faults
  E. Dashboard view of overall voice and video network health.
  E. Dashboard view of overall voice and video network health.

• Question 328:

  What is the min distance for 52" monitor?

  A. 1.5m
  B. 2m
  C. 2.5 m
  D. 3m
  B. 2m

• Question 329:

  An engineer is configuring the Media Server service on a Cisco Video Surveillance server. Which option is the maximum default amount a disk can be full before it is no longer able to store video data?

  A. 75%
  B. 80%
  C. 95%
  D. 98%
  D. 98%

• Question 330:

  An engineer is reviewing a SIP syslog on a TC software-based endpoint. Which area in the syslog indicates the start of the SDP session?

  A. a=
  B. v=
  C. b=
  D. m=
  C. b=