Cisco 210-065 Online Practice Questions and Exam Preparation

Cisco 210-065 Online Questions & Answers

• Question 341:

  Which video-room solution supports internal and external microphones for audio transmission at the same time?

  A. MX300G2
  B. SX80
  C. SpeakerTrack60
  D. C90
  E. Jabber for Windows
  A. MX300G2

• Question 342:

  Which two features does a Cisco TelePresence Server provide that a Cisco MCU cannot? (Choose two.)

  A. conference bridge virtualization support
  B. multiple conference layouts
  C. resource optimization via conductor
  D. 1080p resolution at 60 fps
  A. conference bridge virtualization support
  C. resource optimization via conductor

• Question 343:

  Which two statements about PoE support on Cisco Video Surveillance 6000 Series IP Cameras are true? (Choose two.)

  A. PoE is not supported on the Cisco 6000 Series IP Cameras, and you must use a Cisco 12 VDC power adapter.
  B. PoE is not supported on the Cisco 6000 Series IP Cameras, and you must use third-party 24 VAC power adapter.
  C. The port switch must be 802.3at-compliant to power the camera.
  D. The port switch must be 802.3af-compliant to power the camera.
  E. The Cisco 6000 Series IP Camera requires a network cable and a connection to a standard 10/100BaseT-compliant PoE router or switch.
  D. The port switch must be 802.3af-compliant to power the camera.
  E. The Cisco 6000 Series IP Camera requires a network cable and a connection to a standard 10/100BaseT-compliant PoE router or switch.

• Question 344:

  An immersive video room requires acoustic remediation because there is noticeable reverb present. What type of acoustic paneling does Cisco recommend to provide remediation?

  A. NRC rating greater than 0.75
  B. NRC rating greater than 0.5
  C. NRC rating less than 0.75
  D. NRC rating less than 0.5
  A. NRC rating greater than 0.75

• Question 345:

  What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch?

  A. The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge.
  B. The Cisco TelePresence Multipoint Control Unit is a software bridge for immersive and non-immersive endpoints. The Cisco TelePresence Multipoint Switch is a hardware bridge for non-immersive endpoints.
  C. The Cisco TelePresence Multipoint Control Unit delivers automatic voice-activated switching. The Cisco TelePresence Multipoint Switch provides active presence.
  D. The Cisco TelePresence Multipoint Control Unit has a latency of less than 10 ms, whereas the Cisco TelePresence Multipoint Switch has a latency of 100 ms.
  A. The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge.

• Question 346:

  A Cisco engineer needs to provide digital media for the lobby of a company. Which Cisco Digital Media component should the engineer use?

  A. Cisco Cast
  B. Cisco Digital Signs
  C. Cisco DMP
  D. Cisco Show and Share
  E. Cisco IP TV
  B. Cisco Digital Signs

• Question 347:

  Which DHCP option needs to be configured by a network engineer in order for IP phones to reach the TFTP server?

  A. 60
  B. 50
  C. 150
  D. 160
  C. 150

• Question 348:

  What do you call the process when one bridge calls into another bridge so that participants on both bridges can see and hear each other?

  A. traversing
  B. interworking
  C. flowing
  D. cascading
  D. cascading

• Question 349:

  In the web interface for a Cisco VCS or Expressway running X8.2, which page allows you to enable and download logs that include the xConfiguration, xStatus, DEBUG level network logs, and packet captures of both network interfaces?

  A. Maintenance > Diagnostics > Diagnostic Logging
  B. Maintenance > Diagnostics > System Snapshot
  C. Status > Logs > Event Log
  D. Status > Logs > Configuration Log
  A. Maintenance > Diagnostics > Diagnostic Logging

• Question 350:

  An engineer is switching layout views using a Cisco Video-Surveillance Solution. Which component determines which layout and cameras are used?

  A. Operations Manager
  B. Virtual Matrix
  C. Integrated Services Router
  D. Media Server
  B. Virtual Matrix