Cisco 210-065 Online Practice Questions and Exam Preparation

Cisco 210-065 Online Questions & Answers

• Question 1:

  An engineer wants to convert analog live video, streaming it across an IP network and displaying it in another location. Which component is required, at minimum, to provide this functionality?

  A. Cisco Digital Media Manager
  B. Cisco Media Experience Engine 3500
  C. Interactive Experience Client
  D. Cisco TelePresence Content Server
  D. Cisco TelePresence Content Server

• Question 2:

  An engineer wants to know if there is a way to determine the optical zoom of a Cisco TelePresence SX20 remotely. Which two methods will retrieve this information? (Choose two.)

  A. From the CLI, run xstatus.
  B. From the CLI, run xconfig.
  C. From the web GUI, choose Configuration > System Status > Camera.
  D. From the web GUI, choose Configuration> Camera > Status.
  E. From CLI, run xcommand camera.
  A. From the CLI, run xstatus.
  C. From the web GUI, choose Configuration > System Status > Camera.

• Question 3:

  An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which step is required as part of this process?

  A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
  B. Hold the mute button down for 20 seconds while you power on the Touch 8 controller.
  C. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
  D. Reboot the Cisco TelePresence SX20.
  A. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.

• Question 4:

  Refer to the exhibit.

  

  An H.323 endpoint that is registered to Cisco VCS Control is not able to make B2B calls. Calls to other internal endpoints are working fine. What is the likely cause of the issue?

  A. The Conductor H.323 zone is set to "Off."
  B. The Traversal Zone H.323 zone is set to "Off."
  C. The Production CUCM H.323 zone is set to "Off."
  D. The Traversal Zone H.323 zone is in a "Failed" state.
  B. The Traversal Zone H.323 zone is set to "Off."

• Question 5:

  Which optional feature is available for some video endpoints to enable multiparty calls to be hosted directly on the local endpoint?

  A. WebEx enabled Cisco TelePresence
  B. Multiway
  C. Multisite
  D. MeetMe
  E. ad hoc
  C. Multisite

• Question 6:

  Which component provides flexible options for storing video and audio using a combination of network-attached storage, direct-attached storage, and SAN storage deployments?

  A. Cisco Video Surveillance Media Server
  B. Cisco Video Surveillance Virtual Matrix Software
  C. Cisco Video Surveillance Storage System
  D. Cisco Video Surveillance Transcoding and Encoding Server
  E. Cisco ISR Video Management and Storage Module
  C. Cisco Video Surveillance Storage System

• Question 7:

  An engineer has implemented the pwrec command in a Cisco appliance. This enables the engineer to perform which two actions? (Choose two.)

  A. Change the Telnet password
  B. Change the root password.
  C. Change any user account password.
  D. Change the SSH password.
  E. Change the admin password.
  B. Change the root password.
  E. Change the admin password.

• Question 8:

  A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint, but the codec is not automatically listed in the touch panel. What are two possible reasons for this behavior? (Choose two.)

  A. The codec firmware version is below version TC 6.1.
  B. The codec and the Touch 8 are on separate subnets.
  C. Pairing visibility mode is not active on the codec.
  D. The codec is not compatible with a Touch 8 device.
  E. The Touch 8 is connected via the second Ethernet port on the codec.
  B. The codec and the Touch 8 are on separate subnets.
  C. Pairing visibility mode is not active on the codec.

• Question 9:

  An engineer is receiving several Cisco TMS email alerts for system phonebooks that are not updating. Which menu path should the engineer use to suppress these Cisco TMS email alerts?

  A. TMS > Clear this ticket
  B. TMS > SMTP settings
  C. TMS > Manage ticket error levels
  D. TMS > Ticket management
  E. TMS > Email notification settings
  C. TMS > Manage ticket error levels

• Question 10:

  During the initial setup of the Cisco TelePresence System 500, you are required to do an initial camera setup that fails. What might be a primary reason that the failure occurs?

  A. The camera cannot focus on the target.
  B. The room is too dark.
  C. The system is too far away from the target.
  D. The cable to the camera is not connected correctly.
  B. The room is too dark.