F5 201 Online Practice Questions and Exam Preparation

F5 201 Online Questions & Answers

• Question 101:

  Under what condition must an appliance license be reactivated?

  A. Licenses only have to be reactivated for RMAs no other situations.
  B. Licenses generally have to be reactivated during system software upgrades.
  C. Licenses only have to be reactivated when new features are added (IPv6, Routing Modules, etc) no other situations.
  D. Never. Licenses are permanent for the platform regardless the version of software installed.
  B. Licenses generally have to be reactivated during system software upgrades.

• Question 102:

  A user wants to use the iHealth Upgrade Advisor to determine any issues with upgrading TMOS from 13.0 to 13.1. Where can the user generate the QKView to upload to iHealth?

  A. System > Software Management
  B. System > Archives
  C. System > Configuration
  D. System > Support
  D. System > Support

• Question 103:

  A BIG-IP Administrator needs to check the memory utilization on a BIG-IP system. Which two methods can the UIG IP Administrator use? (Choose two.)

  A. Run the tmsh show/sys memory command
  B. Run the tmsh show/sys traffic command
  C. Go to Statistics > Module Statistics > Traffic Summary in the configuration utility
  D. Go to Statistics > Module Statistics > Memory in the configuration utility
  E. Go to System > Disk Management in the configuration utility
  A. Run the tmsh show/sys memory command
  D. Go to Statistics > Module Statistics > Memory in the configuration utility

• Question 104:

  Which statement describes a typical purpose of iRules?

  A. iRules can be used to add individual control characters to an HTTP data stream.
  B. iRules can be used to update the timers on monitors as a server load changes.
  C. iRules can examine a server response and remove it from a pool if the response is unexpected.
  D. iRules can be used to look at client requests and server responses to choose a pool member to select for load balancing
  A. iRules can be used to add individual control characters to an HTTP data stream.

• Question 105:

  A BIG-IP has two load balancing virtual servers at 150.150.10.10:80 and 150.150.10.10:443. The port 80 virtual server has SNAT automap configured. There is also a SNAT configured at 150.150.10.11 set for a source address range of

  200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to https://150.150.10.10, what is the source IP address when the associated packet is sent to the pool member?

  A. 200.200.1.1
  B. 150.150.10.11
  C. Floating self IP address on VLAN where the packet leaves the system
  D. Floating self IP address on VLAN where the packet arrives on the system
  B. 150.150.10.11

• Question 106:

  Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?

  A. The SNAT must be enabled for all VLANs.
  B. The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.
  C. The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.
  D. The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.
  C. The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.

• Question 107:

  A site needs to terminate client HTTPS traffic at the BIG-IP and forward that traffic unencrypted. Which two are profile types that must be associated with such a virtual server? (Choose two.)

  A. TCP
  B. HTTP
  C. HTTPS
  D. ClientSSL
  E. ServerSSL
  A. TCP
  D. ClientSSL

• Question 108:

  A BIG-IP Administrator upgrades the BIG-IP LTM to a newer software version. After the administrator reboots into the new volume, the Configuration fails to load. Why is the Configuration failing to load?

  A. The license needs to be reactivated before the upgrade.
  B. The upgrade was performed on the standby unit.
  C. A minimum of at least two reboots is required.
  D. Connectivity to the DNS server failed to be established.
  A. The license needs to be reactivated before the upgrade.

• Question 109:

  A BIG-IP Administrator makes a configuration change to a Virtual Server on the Standby device of an HA pair. The HA pair is currently configured with Auto-Sync Enabled. What effect will the change have on the HA pair configuration?

  A. The change will be undone when Auto-Sync propagates the config to the HA pair.
  B. The change will be propagated next time a configuration change is made on the Active device.
  C. The change will be undone next time a configuration change is made on the Active device.
  D. The change will take effect when Auto-Sync propagates the config to the HA pair.
  D. The change will take effect when Auto-Sync propagates the config to the HA pair.

• Question 110:

  Refer to the exhibit.

  

  How many nodes are represented on the network map shown?

  A. Four
  B. Three
  C. One
  D. Two
  B. Three