Cisco 200-355 Online Practice Questions and Exam Preparation

Cisco 200-355 Online Questions & Answers

• Question 461:

  An engineer is gathering information for a wireless survey of a hospital. What two pieces of information must be collected for an active survey to access the outcome best suited for the facility? (Choose two.)

  A. type of devices present on the new wireless network
  B. utilization of Location Services or voice applications
  C. existing Network Switch types and model numbers
  D. use of wireless for secure records
  E. spectrum analysis to locate all the computer work stations
  A. type of devices present on the new wireless network
  B. utilization of Location Services or voice applications

• Question 462:

  A wireless client is trying to connect to wireless network. What must be configured on the client side to connect to an infrastructure WLAN that broadcasts its SSID and uses WPA2 PSK?

  A. PSK
  B. type of EAP protocol
  C. username and password
  D. channel number
  A. PSK

• Question 463:

  You are configuring an external RADIUS server in the wireless controller. Which two items must you define in the controller? (Choose two.)

  A. encryption
  B. VLAN
  C. shared secret
  D. server IP address
  E. SSID
  C. shared secret
  D. server IP address

  ---

  Reference: https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/112134-external-web-radius-00.html

• Question 464:

  When using an enterprise anchor controller and external RADIUS for guest services, which element must be configured on the foreign controller to allow the foreign and anchor tunnel?

  A. RADIUS server
  B. access list
  C. mobility anchor
  D. DHCP scope
  C. mobility anchor

• Question 465:

  During the deployment of a wireless network for data and location services, an engineer is to fine-tune the location services. What is this type of survey called?

  A. passive fingerprinting
  B. passive calibrating
  C. active fingerprinting
  D. active calibrating
  A. passive fingerprinting

• Question 466:

  What two characteristics are components of mobility anchoring? (Choose two.)

  A. It is enabled as a global setting
  B. It is enabled on a per WLAN basis.
  C. Client traffic is tunneled to predefined WLC(s)
  D. Only one mobility anchor is allowed per WLAN
  E. It acts as master controller for a mobility group
  B. It is enabled on a per WLAN basis.
  C. Client traffic is tunneled to predefined WLC(s)

• Question 467:

  What are the sources of interference you will find when conducting a site survey before deployment? (Choose three.)

  A. Bluetooth Headset
  B. Microwave Ovens
  C. Analog Wireless Camera
  D. AdHoc Wireless Camera
  E. AdHoc Hotspot
  A. Bluetooth Headset
  B. Microwave Ovens
  C. Analog Wireless Camera

• Question 468:

  A company wants to implement wireless in all 20 remote office locations and wants centralized management of these remote sites. What application would meet the requirements?

  A. Control And Provisioning of Wireless Access Points
  B. Cisco point- to multi-point wireless bridging
  C. Cisco autonomous access points in FlexConnect mode
  D. Split MAC architecture utilizing LWAPP and WLC
  D. Split MAC architecture utilizing LWAPP and WLC

• Question 469:

  The EoIP tunnel between anchor and foreign controllers is not functioning. Which two ports and protocols must be open to enable the tunnel to form? (Choose two.)

  A. IP 97
  B. UDP port 5246
  C. UDP port 16666
  D. UDP port 1646
  E. UDP port 5247
  A. IP 97
  C. UDP port 16666

  ---

  ports 16666 (16667 if using secure mobility) and protocol 97 must be allowed bidirectionally between the IP addresses of the controller management interfaces.

  -UDP 16666 for tunnel control traffic

  -IP Protocol 97 for user data traffic

• Question 470:

  Which Cisco WLC appliance or module can support as many as 1500 access points?

  A. Cisco 5508
  B. Cisco 5760
  C. Cisco 5520
  D. Cisco WiSM2
  C. Cisco 5520

  ---

  Reference: https://www.cisco.com/c/en/us/products/collateral/wireless/5520-wireless-controller/datasheet-c78-734257.html