Cisco 200-355 Online Practice Questions and Exam Preparation

Cisco 200-355 Online Questions & Answers

• Question 331:

  The administrator needs to create a report that shows all controllers, APs, and Cisco 3300 Series MSEs in the WLAN, including hardware and software information. Which report includes this information?

  A. Device > Inventory
  B. Mesh > Nodes
  C. Network Summary > Executive Summary
  D. Network Summary > 802.11 Summary
  A. Device > Inventory

  ---

  In the left sidebar menu, all of the inventory report options are listed. These reports are generated based on the data already stored in the WCS database. Because inventory reports are not on-demand reports, some configuration changes may have occurred since the storage and may not duplicate the attributes of the controller that are reflected in the stored data. The choices are as follows:

  Access Point Inventory Report --Provides data on deployed access points. The data that is returned includes but is not limited to the following: the access points' MAC address, model, location, and radio status. location appliances.

  Controller Inventory Report --Provides data on deployed controllers. The data that is returned includes but is not limited to the following: the model, IP address, and serial number of the controller, what software version it is running, and where it is located.

  Location Server Inventory Report --Provides data on deployed location appliances. The data that is returned includes but is not limited to the following: the IP address and version of the location appliance, which port is being used, and the time the appliance starts up. http://www.cisco.com/c/en/us/td/docs/wireless/wcs/4-1/configuration/guide/wcscfg41/wcsreps.html#wp1080212

• Question 332:

  Refer to the exhibit.

  

  A wireless engineer has an antenna with the radiation pattern shown in the exhibit. What type of antenna is it?

  A. Patch
  B. Yagi
  C. Parabolic dish
  D. Dipole
  E. Internal omni
  B. Yagi

• Question 333:

  Which four parameters must be configured for local EAP-FAST on the controller? (Choose four.)

  A. authority ID
  B. authority ID Information
  C. client key
  D. PAC
  E. server key
  F. TTL for PAC
  G. monitor key
  H. NTP source
  A. authority ID
  B. authority ID Information
  E. server key
  F. TTL for PAC

  ---

  EAP-FAST is designed to speed re-authentication when a station roams from one AP to another. Here are the parameters that can be configured:

  1.

  Server Key (in hexadecimal): The key (in hexadecimal characters) used to encrypt and decrypt PACs.

  2.

  Time to Live for the PAC: Enter the number of days for the PAC to remain viable. The valid range is 1 to 1000 days, and the default setting is 10 days.

  3.

  Authority ID (in hexadecimal): Enter the authority identifier of the local EAP-FAST server in hexadecimal characters. It is possible to enter up to 32 hexadecimal characters, but an even number of characters must be entered. This will identify the controller as the emitter of the PAC.

  4.

  Authority ID Information: Enter the authority identifier of the local EAP-FAST server in text format.

  5.

  Anonymous Provision: Enable this setting to allow anonymous provisioning. This feature allows PACs to be sent automatically to clients that do not have one during PAC provisioning. If this feature is disabled, PACS must be manually provisioned. Disable this feature when using EAP-FAST with certificates. The default setting is enabled.

• Question 334:

  How many channels exist in the 2.4-GHz ISM band frequency space?

  A. 14
  B. 16
  C. 20
  D. 24
  A. 14

• Question 335:

  You are about to use a hotel's guest wireless services using a wireless laptop. Which three items do you need to establish a wireless connection? (Choose three.)

  A. SSID name
  B. RF channel
  C. RF signal
  D. 802.1X/EAP credentials
  E. pre-shared key
  F. web page
  G. WPA/WPA2 settings
  A. SSID name
  C. RF signal
  F. web page

  ---

  Another common authentication method, especially for guest networks (for example, in hotels, where Internet access must be simple, requiring only an SSID with decent RF signal in each room and a web page to authenticate the user, regardless of the underlying operating system), is Web authentication.

• Question 336:

  The network administrator wants an access point to be able to find rogue APs and to support location-based services. Which AP mode meets this requirement while having the radios up and preventing client connections?

  A. rogue-detection
  B. sniffer
  C. FlexConnect
  D. monitor
  D. monitor

  ---

  If you have enough access points, you can even dedicate an AP to making its only job picking up other networks, this a mode that the AP can be in and is called "Monitor Mode" to change an AP to monitor mode, navigate to the following on

  the WLC:

  This will place the AP into a dedicated monitor mode, it will not service clients but will sit and scan for you.

• Question 337:

  Which option best describes the limitation of a client that is attempting to manage a WLC while using the client wireless adapter connection to the wireless infrastructure?

  A. Controllers must be managed using only secure protocols (that is, SSH and HTTPS), not nonsecure protocols (that is, HTTP and Telnet).
  B. Read-write access is not available; only read-only access is supported.
  C. Uploads and downloads from the controller are not allowed.
  D. Wireless clients can manage other controllers, but not the same controller and the AP to which the client is associated.
  C. Uploads and downloads from the controller are not allowed.

  ---

  The Cisco WLAN Solution Management over Wireless feature allows Cisco WLAN Solution operators to monitor and configure local WLCs using a wireless client. This feature is supported for all management tasks, except uploads to and

  downloads from (transfers to and from) the WLC.

  Reference:

  http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/69561-wlc-faq.html

• Question 338:

  What two AP configurations will show RF prediction on maps in WCS? (Choose two.)

  A. Lightweight APs with internal antennas
  B. Lightweight APs with external Cisco antennas
  C. Lightweight APs with external 3rd Party antennas
  D. Autonomous APs with internal antennas
  E. Autonomous APs with external Cisco antennas
  F. Autonomous APs with external 3rd Party antennas
  A. Lightweight APs with internal antennas
  B. Lightweight APs with external Cisco antennas

• Question 339:

  A network engineer is configuring a WLC running Cisco AireOS 8.0.100.0 for a company that uses IPv6. Which two interfaces can be configured with an IPv6 address? (Choose two.)

  A. management
  B. dynamic
  C. AP manager
  D. redundancy
  E. service
  A. management
  E. service

• Question 340:

  Drag the Cisco WCS report from the left and drop it on the category it reports on to the right.

  Select and Place: