Cisco 200-355 Online Practice Questions and Exam Preparation

Cisco 200-355 Online Questions & Answers

• Question 101:

  Refer to the exhibit.

  

  WLC1 becomes unresponsive due to a power failure at a customer site. How does the access point that is shown in the WLC controller GUI behave now that WLC1 is disabled?

  A. associates to controller 10.201.204.6
  B. associates to controller 10.201.204.11
  C. associates to controller 10.201.204.8
  D. associates to controller 10.201.204.19
  B. associates to controller 10.201.204.11

• Question 102:

  Access points must discover a wireless LAN controller before they can become an active part of the network. In which order does an access point try to discover a controller?

  A. Layer 3 CAPWAP or LWAPP broadcast discovery DHCP option 43 Locally stored controller IP address discovery DNS controller name resolution
  B. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DNS controller name resolution DHCP option 43
  C. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DHCP option 43 DNS controller name resolution
  D. DNS controller name resolution DHCP option 43 Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery
  C. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DHCP option 43 DNS controller name resolution

• Question 103:

  Several types of controller ports can be connected to the network. Which controller port connects to a switch port in access mode and is used for out-of-band management, system recovery, and initial boot functions?

  A. redundancy port
  B. distribution system port
  C. console port
  D. service port
  B. distribution system port

• Question 104:

  Refer to the exhibit.

  

  In WCS, what Monitor submenu would provide the table shown?

  A. Clients
  B. Access Points
  C. Controllers
  D. Security
  E. Alarms
  A. Clients

• Question 105:

  Refer to the exhibit.

  

  A company added a Cisco Wireless LAN Controller to the network and converted all APs to lightweight APs. What is the hop order of the data packets when traveling from Client A to Client B, if the APs are in local mode?

  A. AP Office 1, Switch, WLC, Switch, AP Office 2
  B. AP Office 1, WLC, AP Office 2
  C. AP Office 1, WLC, Switch, AP Office 2
  D. AP Office 1, Switch, WLC, AP Office 2
  A. AP Office 1, Switch, WLC, Switch, AP Office 2

• Question 106:

  Which two tasks does RRM routinely perform? (Choose two.)

  A. antenna selection
  B. AP address assignment
  C. channel assignment
  D. encryption method assignment
  E. transmit power control
  C. channel assignment
  E. transmit power control

• Question 107:

  Refer to the exhibit.

  

  Which menu gives you access to manage background tasks in Cisco WCS?

  A. Monitor
  B. Configure
  C. Services
  D. Administration
  E. Tools
  D. Administration

• Question 108:

  Refer to the exhibit. Drag the MAC addresses on the left that will allow the wireless station Host A to send a frame through a controller based AP to the wired station Host B and drop them in the correct order on the right. Not all options are used.

  Select and Place:

  

  

• Question 109:

  What are two modules of the CCX Lite program? (Choose two.)

  A. foundation
  B. voice
  C. RF power
  D. roaming
  A. foundation
  B. voice

  ---

  In summer 2011, Cisco separated the CCX features into four subfamilies to help vendors integrate only those features that are needed for their specific wireless clients (called application-specific devices, which are devices built for a specific function [for example, barcode scanners or VoWLAN phones] and therefore do not need all the CCX features that a data laptop would need). This is called the CCX Lite program.

• Question 110:

  An engineer has been asked to upgrade the FUS on the Wireless LAN controller. How can they monitor the status of the upgrade?

  A. WLC GUI
  B. WLC CLI
  C. WLC Console
  D. WLC Management in Prime Infrastructure
  C. WLC Console