1. Home
  2. Cisco
  3. 200-301

Cisco 200-301 Online Practice Questions and Exam Preparation

200-301 Exam Details

  • Exam Code
    :200-301
  • Exam Name
    :Implementing and Administering Cisco Solutions (200-301 CCNA) v1.1
  • Certification
    :CCNA
  • Vendor
    :Cisco
  • Total Questions
    :1716 Q&As
  • Last Updated
    :Jun 01, 2026

Cisco 200-301 Online Questions & Answers

  • Question 641:

    A network engineer is installing an IPv6-only capable device. The client has requested that the device IP address be reachable only from the internal network. Which type of IPv6 address must the engineer assign?

    A. unique local address
    B. link-local address
    C. aggregatable global address
    D. IPv4-compatible IPv6 address

  • Question 642:

    Refer to the exhibit. Which two commands must be added to update the configuration of router R1 so that it accepts only encrypted connections? (Choose two.)

    A. username CNAC secret R!41!4319115@
    B. ip ssh version 2
    C. line vty 0 4
    D. crypto key generate rsa 1024
    E. transport input ssh

  • Question 643:

    Refer to the exhibit.

    Routers R1 and R2 are configured with RIP as the dynamic routing protocol. A network engineer must configure R1 with a floating static route to service as a backup route to network 192.168.23. which command must the engineer configure on R1?

    A. ip route 192.168.23.0 255.255.255.0 192.168.13.3 100
    B. ip route 192.168.23.0 255.255.255.255 192.168.13.3 121
    C. ip route 192.168.23.0 255.255.255.0 192.168.13.3 121
    D. ip route 192.168.23.0 255.255.255.0 192.168.13.3

  • Question 644:

    The clients and OHCP server reside on different subnets. Which command must be used to forward requests and replies between clients on the 10.10.0.1/24 subnet and the DHCP server at 192.168.10.1?

    A. ip route 192.168.10.1
    B. ip default-gateway 192.168.10.1
    C. ip helper-address 192.168.10.1
    D. ip dhcp address 192.168.10.1

  • Question 645:

    DRAG DROP

    Drag and drop the configuration management terms from the left onto the descriptions on the right. Not all terms are used.

    Select and Place:

  • Question 646:

    Refer to the exhibit.

    Router-WAN1 has a new connection via Gi0/0 to the ISP. Users running the web applications indicate that connectivity is unstable to the internet. What is causing the interface issue?

    A. The receive buffer is full due to a broadcast storm.
    B. Frames are discarded due to a half-duplex negotiation.
    C. Broadcast packets are rejected because ARP timeout is enabled.
    D. Small frames less than 64 bytes are rejected due to size.

  • Question 647:

    What is a characteristic of private IPv4 addressing?

    A. simplifies the addressing in the network
    B. complies with PCI regulations
    C. reduces the forwarding table on network routers
    D. is used on hosts that communicate only with other internal hosts

  • Question 648:

    Refer to the exhibit.

    During initial configuration testing, the Windows workstation PC1 cannot connect with the 172.16.2.0/24 network.

    Which set of actions corrects the configuration?

    A. Change the IP address to 172.16.1.6 and change the subnet mask to 255.255.255.248.
    B. Change the IP address to 172.16.1.6 and change the DNS servers to 172.16.1.12 and 172.16.1.13.
    C. Change the IP address to 172.16.1.9 and change the default gateway to 172.16.1.7.
    D. Change the IP address to 172.16.1.9 and change the DNS server to 172.16.1.12 only.

  • Question 649:

    Refer to the exhibit.

    An engineer configures interface Fa0/1 on SW1 and SW2 to pass traffic from two different VLANs. For security reasons, company policy requires the native VLAN to be set to a nondefault value. Which configuration meets this requirement?

    A. Switch(config-if)#switchport mode trunk Switch(config-if)#switchport trunk encapsulation dot1q Switch(config-if)#switchport trunk allowed vlan 100,105 Switch(config-if)#switchport trunk native vlan 3
    B. Switch(config-if)#switchport mode trunk Switch(config-if)#switchport trunk encapsulation isl Switch(config-if)#switchport trunk allowed vlan 100,105 Switch(config-if)#switchport trunk native vlan 1
    C. Switch(config-if)#switchport mode dynamic Switch(config-if)#switchport access vlan 100,105 Switch(config-if)#switchport trunk native vlan 1
    D. Switch(config-if)#switchport mode access Switch(config-if)#switchport trunk encapsulation dot1q Switch(config-if)#switchport access vlan 100,105 Switch(config-if)#switchport trunk native vlan 3

  • Question 650:

    Which option is a valid IPv6 address?

    A. 2001:0000:130F::099a::12a
    B. 2002:7654:A1AD:61:81AF:CCC1
    C. FEC0:ABCD:WXYZ:0067::2A4
    D. 2004:1:25A4:886F::1

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 200-301 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.