Cisco 200-150 Online Practice Questions and Exam Preparation

Cisco 200-150 Online Questions & Answers

• Question 41:

  Which two features must be licensed on a Cisco Nexus 5548UP Switch? (Choose two.)

  A. Virtual Port Channel
  B. Fibre Channel
  C. FabricPath
  D. iSCSI
  B. Fibre Channel
  C. FabricPath

• Question 42:

  When using HSRP or VRRP, what are the two states of the router interfaces that are ready to take over forwarding for the link, if necessary? (Choose two)

  A. idle
  B. backup
  C. master
  D. Standby
  E. floating
  B. backup
  D. Standby

• Question 43:

  Which Fibre Channel interface port mode is used to connect multiple switches together?

  A. N port
  B. E port
  C. F port
  D. NL port
  B. E port

• Question 44:

  

  Refer to the exhibit. Two Layer 2 Cisco Nexus switches are connected to application servers in a data center. Server A cannot communicate with servers that are in VLANs 3 and 4, but t can communicate with server B and C. What is the cause of the problem?

  A. inter VLANs routing is not enabled on both switches
  B. Switch I and switch 2 are not physically connected via an access link.
  C. A router must be connected to both switches and provide inter VLAN routing.
  D. Switch 1 and switch 2 not physically connected via a trunk link.
  C. A router must be connected to both switches and provide inter VLAN routing.

• Question 45:

  View the exhibit.

  

  Refer to the exhibit. What type of network communication is depicted?

  A. 802 3 frame
  B. TCP packet
  C. UDP packet
  D. Ethernet frame
  D. Ethernet frame

• Question 46:

  Instructions:

  THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.

  To access the multiple- choice questions, click on the numbered boxes on the left of the top panel.

  There are four multiple- choice questions with this task. Be sure to answer all four questions before selecting the Next button.

  Scenario:

  Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches. Please go through the Topology and Exhibit 1 through 4 to answer the questions.

  Topology:

  

  Exhibit 1.

  

  Exhibit 2.

  

  Exhibit 3.

  

  Exhibit 4.

  

  What can you tell about server ports and their external interfaces from the exhibits?

  A. vfc3/1 is not correctly connected to server external interface fc2/1.
  B. vfc3/1 is not correctly connected to server external Interface fc2/1 and flogi are unsuccessful.
  C. Server interface vfc3/1 is assigned to NP uplinks fc2/1. fc2/2, fc2/3. and fc2/4. There are 4 successful flogi.
  D. Server interface vfc3/1 is assigned to NP uplinks fc2/1, fc2/2, fc2/3, and fc2/4. There are 4 flogi are in initialization state.
  B. vfc3/1 is not correctly connected to server external Interface fc2/1 and flogi are unsuccessful.

• Question 47:

  Which four statements indicate unique properties of VLAN 1 on Cisco Nexus switches? (Choose four.)

  A. VLAN 1 is used to flood multicast traffic.
  B. VLAN 1 cannot be deleted.
  C. VLAN 1 is used for Cisco Discovery Protocol.
  D. VLAN 1 is used for VTP advertisements.
  E. VLAN 1 defines a collision domain.
  F. VLAN 1 defines a broadcast domain.
  B. VLAN 1 cannot be deleted.
  C. VLAN 1 is used for Cisco Discovery Protocol.
  D. VLAN 1 is used for VTP advertisements.
  F. VLAN 1 defines a broadcast domain.

  ---

  http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx- os/layer2/configuration/guide/Cisco_Nexus_7000_Series_NX- S_Layer_2_Switching_Configuration_Guide_Release_5.x_chapter4.html

• Question 48:

  Which situation results in a flashing blue status LED on a Cisco Nexus 7000 switch I/O module?

  A. The switch has just been powered on, and the module is resetting.
  B. The module is resetting and both ejector levers are out.
  C. The module has been inserted during the initialization process.
  D. The module could not power up because of insufficient power.
  E. The operator has activated this LED to identify this module in the chassis.
  E. The operator has activated this LED to identify this module in the chassis.

• Question 49:

  Which two protocols can you use SAN storage that is accesses via low-latency, high-bandwidth networking? (Choose two.)

  A. AFP
  B. CIFS
  C. NFS
  D. FCP
  E. iSCSI
  B. CIFS
  C. NFS

• Question 50:

  Refer to the exhibit.

  

  How many broadcast domains are represented?

  B. 1
  C. 2
  D. 3
  C. 2