Oracle 1Z0-404 Online Practice Questions and Exam Preparation

Oracle 1Z0-404 Online Questions & Answers

• Question 1:

  The Session Border Controller ACLI is structured in a way that separates configuration of layers 3,4, and 5. This allows the system administrator to link each configuration together as needed for signaling and media routing purposes.

  Which two options are valid to link signaling and media interfaces to a realm? (Choose two.)

  A. Navigate to the iwf-config configuration element and set the media-interface-id parameter to the realm name.
  B. Navigate to the account-config configuration element and set the realm-id parameter to the realm name.
  C. Navigate to the network-interface configuration element and set the sip-interface-id parameter to the realm name.
  D. Navigate to the steering-pool configuration element and set the realm-id parameter to the realm name.
  E. Navigate to the sip-interface configuration element and set the realm-id parameter to the realm name.
  A. Navigate to the iwf-config configuration element and set the media-interface-id parameter to the realm name.
  B. Navigate to the account-config configuration element and set the realm-id parameter to the realm name.

• Question 2:

  What configuration step is required for booting the SessionBorder Controller from an external FTP server?

  A. Navigate to the bootparams configuration branch and set the host inet field to the IP address of the external BOOTP Server from which the Session Border Controller can boot.
  B. Navigate to the system configuration branch and set the ip address field of the wancom1 management interface.
  C. Navigate to the bootparams configuration branch and set the ip address field of the destination SIP device with which the Session Border Controller needs to interact.
  D. Navigate to the system configuration branch and set the ip address field of the wancom0 management interface.
  E. Navigate to the bootparams configuration branch, set the host inet or Host IP, FTP username, and FTP password for the external FTP Server in which the image file resides.
  C. Navigate to the bootparams configuration branch and set the ip address field of the destination SIP device with which the Session Border Controller needs to interact.

• Question 3:

  You are configuring a network interface to enable the Session Border Controller to use the interface for signaling and media.

  Identify two valid configuration steps for supporting VLAN 12 (Choose two.)

  A. Navigate to the network-interface configuration element and set the sub-port-id parameter to 12.
  B. Navigate to the network-interface configuration element and set the sub-port-id parameter to 0.
  C. Navigate to the phy-interface configuration element and configure the hip-id parameter.
  D. Navigate to the phy-interface configuration element and configure the pri-utility-address parameter.
  E. Navigate to the network-interface configuration element and configure the name parameter.
  A. Navigate to the network-interface configuration element and set the sub-port-id parameter to 12.
  C. Navigate to the phy-interface configuration element and configure the hip-id parameter.

• Question 4:

  Which two statements are true about a realm on the Session Border Controller?

  A. It can only have one steering poolport per realm.
  B. It is a layer 3 abstraction of a VoIP network.
  C. It is a logical definition of a network or group of networks comprising devices that provide real-time communication.
  D. It is a layer 5 abstraction of a VoIP network.
  E. It is acollection of IP devices that perform IP routing functions.
  B. It is a layer 3 abstraction of a VoIP network.
  C. It is a logical definition of a network or group of networks comprising devices that provide real-time communication.

• Question 5:

  After configuring Header Manipulation Rules (HMRs) for topology hiding, your subsequent testing shows that the manipulation is not takingeffect.

  Identify two causes for this (Choose two.)

  A. You have not configured the out-manipulationid parameter of the sip-interface configuration element.
  B. You have not enabled policy-based realm-bridging.
  C. The value of the name parameter in the header-rule configuration element is different than the value of the out-manipulationid parameter in the sip-interface configuration element.
  D. The value of the match-val-type parameter is not written correctly.
  E. The home-proxy-address value does not matchthe $LOCAL_IP value in the new-value parameter.
  A. You have not configured the out-manipulationid parameter of the sip-interface configuration element.
  E. The home-proxy-address value does not matchthe $LOCAL_IP value in the new-value parameter.

• Question 6:

  You are associating network-interface configuration elements with a physical- interfaceconfiguration element on the Session Border Controller.

  Which parameter must contain the same unique ID in these two configuration elements?

  A. port-id
  B. identifier
  C. unique-id
  D. name
  E. sub-port-id
  A. port-id

• Question 7:

  To return the Session Border Controller configuration to a known, factory default state, you must____________.

  A. press the reset button on the front panel
  B. issue the delete-configcommand
  C. issue the set-system-state offline command
  D. issue the set-system-state offline
  E. issue the delete-config and reboot commands
  E. issue the delete-config and reboot commands

• Question 8:

  You are adding peers to a Policy-Based Realm Bridging (PBRB) configuration. Which two configuration steps, among others, are required? (Choose two.)

  A. Navigate to the media-manager configuration branch and configure the realm-config configuration element.
  B. Navigate to the session-router configuration branch and configure the sipd-address configuration element.
  C. Navigate to the session-router configuration branch and configure the local-policy configuration element.
  D. Navigate to the session-router configuration branch and configure the sip-nat configuration element.
  E. Navigate to the media-manager configuration branch and configure the access-control configuration element.
  A. Navigate to the media-manager configuration branch and configure the realm-config configuration element.
  E. Navigate to the media-manager configuration branch and configure the access-control configuration element.

• Question 9:

  The Session Border Controller needs to be configured to act as a Back-to-Back User Agent (B2BUA).

  How would you accomplish this?

  A. Navigate to the sip-config configuration element and set the operation-mode to stateless.
  B. Navigate to the sip-configconfiguration element and set the operation-mode to dialog.
  C. Navigate to the sip-config configuration element and set the operation-mode to stateful.
  D. Navigate to the session-router configuration element and set the operation-mode to dialog.
  E. Navigate to the session-router configuration element and set the operation-mode to none.
  B. Navigate to the sip-configconfiguration element and set the operation-mode to dialog.

• Question 10:

  You are logged in to the Session Border Controller a superuser. You want to remove other user from the system.

  How do you accomplish this?

  A. from the superuser mode, by executing the remove user command
  B. from the user mode, by executing the kill command
  C. from the superuser mode, by executing the remove user command
  D. from the superuser mode, by executing the kill command
  E. from the user mode, by executing the remove user command
  C. from the superuser mode, by executing the remove user command