Oracle 1Z0-404 Online Practice Questions and Exam Preparation

Oracle 1Z0-404 Online Questions & Answers

• Question 11:

  You need to configure the Session Border Controller toperform load balancing between two downstream SIP proxies.

  Which option shows the configuration elements that you should configure for the load balancing feature?

  A. session-router and router-group
  B. realm-config and enum-group
  C. group-policy andload-policy
  D. proxy and proxy-pool
  E. local-policy and session-group
  A. session-router and router-group

• Question 12:

  Which three options are valid ways to apply Header Manipulation Rules (HMRs) to your existing configuration?

  A. Navigate to the network-interface configuration element and configure the in- manipulationid parameter.
  B. Navigate to the session-agent configuration element and configure the in-manipulationid parameter.
  C. Navigate to the sip-interface configuration element and configure the in-manipulationid parameter.
  D. Navigate to the session-agent configuration element and configure the in-manipulationid parameter.
  E. Navigate to the session-group configuration element and configure the in-manipulationid parameter.
  A. Navigate to the network-interface configuration element and configure the in- manipulationid parameter.
  B. Navigate to the session-agent configuration element and configure the in-manipulationid parameter.
  C. Navigate to the sip-interface configuration element and configure the in-manipulationid parameter.

• Question 13:

  You are configuring access rules in a Session Border Controller Peering architecture.

  Which two configuration steps are required to allow access only from User Agents (UAs) in a specific IP subnet? (Choose two.)

  A. Navigate to the sip-port configuration element and set the allow-anonymous parameter to realm-prefix.
  B. Navigate to the session-agent configuration element and set the ip-address parameter to the IP address of your trusted User Agent (UA).
  C. Navigate to the sip-port configuration element and set the allow-anonymous parameter to agents-only.
  D. Navigate to the sip-port configuration element and set the allow-anonymous parameter to all.
  E. Navigate to therealm-config configuration element and set the addr-prefix parameter to the IP subnet of your trusted User Agents (UAs).
  B. Navigate to the session-agent configuration element and set the ip-address parameter to the IP address of your trusted User Agent (UA).
  C. Navigate to the sip-port configuration element and set the allow-anonymous parameter to agents-only.

• Question 14:

  Which action triggers the 180 Ringing response in a User Agent Client (UAC)?

  A. the subscription to a SIP presence service
  B. the generation of a remote ring-back tone
  C. the generation of a local ring-back tone
  D. the establishment of a SIP session
  E. the termination of a SIP session
  C. the generation of a local ring-back tone

• Question 15:

  You want to prevent the Session Border Controller from generating aunique Call-ID and from modifying the dialog tags.

  How would you accomplish this?

  A. Navigate to the sip-interface configuration element and set the dialog-transparency parameter to disabled.
  B. Navigate to the sip-config configuration element and set the dialog-mapping parameter to disabled.
  C. Navigate to the sip-config configuration element and set the call-id-transparency parameter to disabled.
  D. Navigate to the sip-config configuration element and set the dialog-transparency parameter to disabled.
  E. Navigate to the sip-config configuration element and set the dialog-transparency parameter to enabled.
  E. Navigate to the sip-config configuration element and set the dialog-transparency parameter to enabled.

• Question 16:

  Which configuration step is required to route a SIP callbased on the value of the SIP INVITE Request-URI?

  A. Navigate to the policy-attribute configuration element and configure the from-address parameter to match the Request-URI value.
  B. Navigate to the policy-attribute configuration element and configure the to-address parameter to match the Request-URI value.
  C. Navigate to the local-policy configuration element and configure the from-address parameter to match the Request-URI value.
  D. Navigate to the local-policy configuration element and configure the to-address parameter to match the Request-URI value.
  E. Navigate to the local-policy configuration element and configure the destination-address parameter to match the Request-URI value.
  C. Navigate to the local-policy configuration element and configure the from-address parameter to match the Request-URI value.

• Question 17:

  From which Session Border Controller node in a high availability (HA) pair, could a network administrator trigger a system switchover manually by issuing the notify berpd force command?

  A. Secondary only
  B. Active node that no longer has a heartbeat
  C. Standby only
  D. Active only
  E. Standby orActive
  D. Active only

• Question 18:

  Which two functionalities are provided by Session Border Controllers? (Choose two.)

  A. they span multiple networks and provide edge proxy functions between them
  B. they are session-aware devices that enable control of end-to-end interactive communications across PSTN network borders
  C. they enable premium interactive services across IP network borders by complementing existing edge routers
  D. they provide routingfunctions for IP, TCP, and SMTP using application parameters.
  E. they replace typical edge routers and firewalls in order to provide a unified network border for signaling and media control
  A. they span multiple networks and provide edge proxy functions between them
  C. they enable premium interactive services across IP network borders by complementing existing edge routers

• Question 19:

  You were working with the Session Border Controller in configuration mode and you forgot toclose your session. Your colleague who connected after you left says that he cannot enter into configuration mode.

  Why is your colleague not able to configure the Session Border Controller?

  A. The Session Border Controller does not allow more than one configuration session within 24 hours.
  B. The Session Border Controller does not support Telnet/SSH timeouts.
  C. The Session Border Controller supports only one simultaneous configuration session, and the Telnet/SSH timeouts are set to 0.
  D. The Session Border Controller supports only 10 simultaneous configuration sessions.
  E. The Session Border Controller supports only five simultaneous Telnet/SSH sessions.
  C. The Session Border Controller supports only one simultaneous configuration session, and the Telnet/SSH timeouts are set to 0.

• Question 20:

  You are examining a SIP packet. There is no final response to the ACK method.

  What is the reason for this?

  A. The ACK method was defined only in RFC 2543and it has been deprecated.
  B. The ACK method is part of the INVITE transaction.
  C. The ACK method is an exception in RFC 3261.
  D. The ACK method is an optional SIP method.
  E. The ACK method was replaced with the CANCEL method in RFC 3261.
  B. The ACK method is part of the INVITE transaction.