Riverbed 199-01 Online Practice Questions and Exam Preparation

Riverbed 199-01 Online Questions & Answers

• Question 291:

  The Xbridge feature on Interceptor provides:

  A. Significant line-throughput improvement for optimized and pass-through traffic for 10 Gbps interfaces.
  B. Significant line-throughput improvement for optimized traffic for 10 Gbps interfaces.
  C. Significant line-throughput improvement for optimized traffic for 10 Gbps and 1 Gbps interfaces.
  D. Significant line-throughput improvement for optimized and pass-through traffic for 1 Gbps interfaces.
  A. Significant line-throughput improvement for optimized and pass-through traffic for 10 Gbps interfaces.

• Question 292:

  What platform is supported by SMC-VE?

  A. ESX 3.5
  B. ESX 4.0
  C. ESX 4.1
  D. RSP
  E. HyperV
  D. RSP

• Question 293:

  When utilizing MAPI prepopulation, the default timer is set to:

  A. 96 hours
  B. 1 hour
  C. 30 minutes
  D. There is no default timer
  A. 96 hours

• Question 294:

  Which of the following are examples of Security policies on the CMC appliance? (Select 3)

  A. SSL Peering
  B. SSL Ciphers
  C. User Permissions
  D. Web Settings
  E. RADIUS
  C. User Permissions
  D. Web Settings
  E. RADIUS

• Question 295:

  Which physical Steelhead interface communicates with the Interceptor appliance?

  A. AUX
  B. Primary
  C. wan0_0
  D. B and C
  E. A, B, and C
  D. B and C

• Question 296:

  Two Steelhead appliances deployed in-path at different offices cannot auto-discover each other. What technique can be used to "force" the two Steelhead appliances to optimize traffic between each other?

  A. Change the TCP port the Steelhead appliances use for their in-path connections to 7810
  B. Disable the auto-discovery feature on the Steelhead appliances
  C. Create auto-discovery rules that map to each Steelhead appliance's in-path IP address
  D. Create fixed-target rules on each Steelhead appliance using the in-path IP address of the other Steelhead appliance, and use port 7800
  E. Use the "enable probe" command from the CLI
  D. Create fixed-target rules on each Steelhead appliance using the in-path IP address of the other Steelhead appliance, and use port 7800

• Question 297:

  When Connection Forwarding is in use, when a neighbor fails, the default behavior of the remaining neighbor will be to:

  A. It will start to bypass traffic immediately
  B. It will start to bypass traffic only after about 30 seconds
  C. It is transparent to the outage and will continue to optimize as per normal
  D. It will cease to optimize for about 30 seconds and start to optimize again
  B. It will start to bypass traffic only after about 30 seconds

• Question 298:

  What is the first step in optimizing an SMTPS session?

  A. An unencrypted SMTP connection is intercepted and optimized, before a START-TLS is issued.
  B. START-TLS is issued immediately by the client and intercepted by the client side SteelHead.
  C. SteelHeads do not currently support optimizing SMTPS sessions.
  D. An SSL client HELLO is sent by the client and intercepted by the client side SteelHead.
  A. An unencrypted SMTP connection is intercepted and optimized, before a START-TLS is issued.

• Question 299:

  A customer with a new physical in-path installation decides to turn on the optimization service during lunch time on a working day. This is done so that he can see if the users perceive any performance improvement. When starting the optimization service, he does not enable the in-path kickoff option. Assuming there were several already active connections when he starts the optimization service, how will the Steelhead appliances handle these existing connections?

  A. The Steelhead appliance will optimize all connections, including pre-existing
  B. The Steelhead appliance will pass-through all pre-existing connections, leaving them un-optimized
  C. The Steelhead appliance will reset all pre-existing connections, thus automatically changing their optimization status from un-optimized to optimized
  D. The Steelhead appliance will list the connections as "pre-existing" on the Current Connections page
  E. Both B and D
  F. Both C and D
  E. Both B and D

• Question 300:

  The default setting for "allow failure" in the Interceptor appliance version 2.0 is: (Select 2)

  A. Is configurable
  B. Is not configurable
  C. Enabled by default
  D. Disabled by default
  A. Is configurable
  D. Disabled by default