Cisco 100-105 Online Practice Questions and Exam Preparation

Cisco 100-105 Online Questions & Answers

• Question 341:

  How many simultaneous Telnet sessions does a Cisco router support by default?

  A. 1
  B. 2
  C. 3
  D. 4
  E. 5
  F. 6
  E. 5

• Question 342:

  Refer to the exhibit.

  

  A network administrator has configured a Catalyst 2950 switch for remote management by pasting into the console the configuration commands that are shown in the exhibit. However, a Telnet session cannot be successfully established from a remote host. What should be done to fix this problem?

  A. Change the first line to interface fastethernet 0/1.
  B. Change the first line to interface vlan 0/1.
  C. Change the fifth line to ip default-gateway 192.168.17.241.
  D. Change the fifth line to ip route 0.0.0.0 0.0.0.0 192.168.17.1.
  E. Change the sixth line to line con 0.
  C. Change the fifth line to ip default-gateway 192.168.17.241.

• Question 343:

  Which IOS command is used to initiate a login into a VTY port on a remote router?

  A. router# login
  B. router# telnet
  C. router# trace
  D. router# ping
  E. router(config)# line vty 0 5
  F. router(config-line)# login
  B. router# telnet

• Question 344:

  DRAG DROP

  Refer to the exhibit. You are configuring the router to provide Static NAT for the web server.

  Drag and drop the configuration commands from left onto the letters that correspond to its position in the configuration on the right.

  

  Select and Place:

  

  

• Question 345:

  Which feature automatically disables CEF when it is enabled?

  A. RIB
  B. ACL logging
  C. multicast
  D. IP redirects
  B. ACL logging

• Question 346:

  Refer to the exhibit. A network associate has configured OSPF with the command: City(config-router)# network 192.168.12.64 0.0.0.63 area 0 After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF. Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? (Choose

  three.)

  

  A. FastEthernet0 /0
  B. FastEthernet0 /1
  C. Serial0/0
  D. Serial0/1.102
  E. Serial0/1.103
  F. Serial0/1.104
  B. FastEthernet0 /1
  C. Serial0/0
  D. Serial0/1.102

• Question 347:

  Which field in a routing table entry is used to identify the immediate destination of a packet?

  A. next-hop
  B. metric
  C. administrative distance
  D. destination network
  A. next-hop

• Question 348:

  Drag and Drop Question

  Drag and drop the descriptions of logging from the left onto the correct logging features or compenents on the right.

  Select and Place:

  

  

• Question 349:

  The network administrator has found the following problem. The remote networks 172.16.10.0, 172.16.20.0, and 172.16.30.0 are accessed through the Central router's serial 0/0 interface. No users are able to access 172.16.20.0. After reviewing the command output shown in the graphic, what is the most likely cause of the problem?

  

  A. no gateway of last resort on Central
  B. Central router's not receiving 172.16.20.0 update
  C. incorrect static route for 172.16.20.0
  D. 172.16.20.0 not located in Central's routing table
  C. incorrect static route for 172.16.20.0

• Question 350:

  Refer to the exhibit.

  

  If the resume command is entered after the sequence that is shown in the exhibit, which router prompt will be displayed?

  A. Router2#
  B. Router2>
  C. Router1#
  D. Router1>
  B. Router2>