Cisco 010-151 Online Practice Questions and Exam Preparation

Cisco 010-151 Online Questions & Answers

• Question 31:

  Refer to the exhibit.

  

  Where is the best place to see whether the system is ready for a Fabric Interconnect failover?

  A. A - Overall Status operable
  B. B - L1 Connection
  C. C - Part Details
  D. D - Access
  E. E - High Availability Details
  E. E - High Availability Details

• Question 32:

  Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)

  A. In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.
  B. Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention.
  C. In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).
  D. If the memory in a server is not fully populated, you can install DIMMs in any open slot.
  A. In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.
  C. In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).

  ---

  Explanation/Reference:

• Question 33:

  

  Refer to the exhibit. Which item does B represent?

  A. mLOM
  B. Rear 2.5-inch drive bays
  C. PCle Riser 1
  D. PCle Riser 2
  E. Power Supply
  D. PCle Riser 2

  ---

  Explanation/Reference:

• Question 34:

  Which tool does a network administrator not need when installing hardware?

  A. cable tester
  B. wrench set
  C. cable wraps
  D. needle-nose pliers
  E. PCMCIA memory
  F. soldering iron with grounded tip
  F. soldering iron with grounded tip

  ---

  Explanation/Reference:

• Question 35:

  In Cisco UCS C480 M5 server, which PCle slot is the default slot for the rear RAID controller when the rear drive module is used with SAS/SATA drives?

  A. PCle slot 09
  B. PCle slot 10
  C. PCle slot 11
  D. PCle slot 12
  C. PCle slot 11

  ---

  Explanation/Reference:

  Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C480M5/install/C480M5/C480M5_chapter_01.html

• Question 36:

  Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?

  A. routing
  B. tunneling
  C. handshaking
  D. transporting
  B. tunneling

• Question 37:

  Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?

  A. Cisco Nexus 5548P
  B. Cisco Nexus 5548UP
  C. Cisco Nexus 5596UP
  D. Cisco Nexus 5596T
  D. Cisco Nexus 5596T

  ---

  Explanation/Reference:

• Question 38:

  

  Refer to the exhibit. Which item does C represent?

  A. CMOS Battery
  B. Internal USB
  C. Mini Storage Connector
  D. mLOM Connector
  E. GPU
  C. Mini Storage Connector

  ---

  Explanation/Reference:

  Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/b200m5-specsheet.pdf

• Question 39:

  Which two statements are true about the Cisco UCS C4200 Rack server and UCS C125 M5 compute node? (Choose two.)

  A. 8 NVIDIA SXM2 V100 32G modules with NVLink interconnect
  B. AMD EPYC 7000 series processors, with up to 32 cores per socket
  C. 2666-MHz DDR4 memory and 24 DIMM slots for up to 3 TB of total memory
  D. Optional dual SD cards for increased storage or boot drive capacity
  E. Over 45 TB of storage, with up to six small-form-factor 2.5-inch direct-attached drives per node
  D. Optional dual SD cards for increased storage or boot drive capacity
  E. Over 45 TB of storage, with up to six small-form-factor 2.5-inch direct-attached drives per node

  ---

  Explanation/Reference:

• Question 40:

  Which tool is needed when servicing a UCS M5 server?

  A. PCle slot cover
  B. T-30 Torx driver
  C. M5 DIMM puller
  D. HDD removal tool
  B. T-30 Torx driver

  ---

  Explanation/Reference:

  Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220M5/install/C220M5/C220M5_chapter_010.html