350-401 Web TestEngine Demo | VCEDump

Exit VCEDump 350-401 Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)

Q39 Single choice

An engineer must create an EEM script to enable OSPF debugging in the event the OSPF neighborship goes down.

Which script must the engineer apply?

A
event manager applet ENABLE_OSPF_DEBUG
event syslog pattern "%OSPF-5-ADJCHG: Process 6, Nbr 1.1.1.1 on Serial0/0 from FULL to DOWN"
action 1.0 cli command "enable"
action 2.0 cli command "debug ip ospf event"
action 3.0 cli command "debug ip ospf adj"
action 4.0 syslog priority informational msg "ENABLE_OSPF_DEBUG"
B
event manager applet ENABLE_OSPF_DEBUG
event syslog pattern "%OSPF-5-ADJCHG: Process 5, Nbr 1.1.1.1 on Serial0/0 from LOADING to FULL"
action 1.0 cli command "debug ip ospf event"
action 2.0 cli command "debug ip ospf adj"
action 3.0 syslog priority informational msg "ENABLE_OSPF_DEBUG"
C
event manager applet ENABLE_OSPF_DEBUG
event syslog pattern "%OSPF-1-ADJCHG: Process 5, Nbr 1.1.1.1 on Serial0/0 from FULL to DOWN"
action 1.0 cli command "debug ip ospf event"
action 2.0 cli command "debug ip ospf adj"
action 3.0 syslog priority informational msg "ENABLE_OSPF_DEBUG"
D
event manager applet ENABLE_OSPF_DEBUG
event syslog pattern "%OSPF-5-ADJCHG: Process 5, Nbr 1.1.1.1 on Serial0/0 from LOADING to FULL"
action 1.0 cli command "enable"
action 2.0 cli command "debug ip ospf event"
action 3.0 cli command "debug ip ospf adj"
action 4.0 syslog priority informational msg "ENABLE_OSPF_DEBUG"

Previous Check answer

Question map39 / 100

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

Current Correct Answered Incorrectly Reviewed 0 Remaining 100

Marked Questions0

No marked questions.

Answered Incorrectly0

No incorrect answers.