VMware VCPN610 Online Practice Questions and Exam Preparation

VMware VCPN610 Online Questions & Answers

• Question 11:

  You are managing three ESXi 5.1 hosts attached to a vSphere Distributed Switch (vDS) using the default settings. You need to provide LACP Active Mode connectivity for the two 10Gb uplinks of each host attached to the Uplink Port Group of the vDS.

  Using VMware best practices, which option shows the steps required to configure use of LACP?

  A. Upgrade all ESXi hosts to ESXi version 5.5. Create a new version 5.5 vDS. Use the Add and Manage Hosts option to migrate the hosts to the new vDS. Configure the appropriate LACP settings.
  B. Upgrade all ESXi hosts to ESXi version 5.5. Create a new version 5.5 vDS and use the Add and Manage Hosts option to migrate the hosts to the new vDS. Upgrade all virtual machines to hardware version 10. Configure the appropriate LACP settings.
  C. Upgrade all ESXi hosts to ESXi version 5.5. Upgrade the existing vDS and use the Add and Manage Hosts option to migrate the hosts to the new vDS. Upgrade all virtual machines to hardware version 10. Configure the appropriate LACP settings.
  D. Upgrade all ESXi hosts to ESXi version 5.5. Upgrade the existing vDS to version 5.5. Configure the appropriate LACP settings.
  D. Upgrade all ESXi hosts to ESXi version 5.5. Upgrade the existing vDS to version 5.5. Configure the appropriate LACP settings.

• Question 12:

  An NSX Edge Service Gateway has two interfaces:

  

  Internal interface named Internal Access -- IP address = 10.10.10.1 -- Network mask = 255.255.255.0

  

  Uplink interface named Physical Uplink -- IP address = 20.20.20.1 -- Network mask = 255.255.255.0

  A vSphere administrator wants to add a SNAT rule to allow traffic from the internal network segment to access external resources via the uplink interface.

  Which three steps should the vSphere administrator do to add the SNAT rule? (Choose three)

  A. Apply the SNAT rule to the Internal Access interface.
  B. Select 10.10.10.1 as the translated source IP.
  C. Apply the SNAT rule on the Physical Uplink interface.
  D. Select 10.10.10.0/24 as the original subnet.
  E. Choose 20.20.20.2 as the translated source IP.
  C. Apply the SNAT rule on the Physical Uplink interface.
  D. Select 10.10.10.0/24 as the original subnet.
  E. Choose 20.20.20.2 as the translated source IP.

• Question 13:

  A data center environment contains the following:

  Which two steps must be taken to ensure a successful NSX deployment? (Choose two.)

  A. Upgrade the vCenter Server installation to vCenter Server 5.5.
  B. Upgrade the network devices to support layer 2 multi-pathing.
  C. Upgrade all compute nodes to ESXi 5.1 or later.
  D. Upgrade the VMware Horizon View installation to Horizon View 5.3.
  A. Upgrade the vCenter Server installation to vCenter Server 5.5.
  C. Upgrade all compute nodes to ESXi 5.1 or later.

• Question 14:

  Which two vSphere components are required for NSX? (Choose two.)

  A. Standard vSwitch
  B. Network I/O Control
  C. Distributed Port Group
  D. VMkernel port
  C. Distributed Port Group
  D. VMkernel port

• Question 15:

  What are two valid methods of configuring virtual machines to use a vSphere Distributed Switch (vDS) that are currently using a vSphere Standard Switch (vSS)? (Choose two.)

  A. Select each virtual machine and drag it to the vSphere Distributed Switch.
  B. Select the vSS in use by the virtual machines and select the Move to option on the right-click menu.
  C. Select each virtual machine and edit the virtual network adapter's connection settings.
  D. Use the Migrate Virtual Machine Networking option from the right-click menu of the vDS.
  C. Select each virtual machine and edit the virtual network adapter's connection settings.
  D. Use the Migrate Virtual Machine Networking option from the right-click menu of the vDS.

• Question 16:

  An administrator is deploying a distributed router and is adding an interface for a logical switch, as shown in the following exhibit:

  The administrator clicks on the Change link to specify the network to connect to. Selecting the distributed portgroup, the administrator finds that no portgroups are listed. The administrator verifies the desired portgroup exists in vCenter

  Server.

  What condition would result in this behavior?

  A. The MTU size is set to 1500
  B. A subnet has not been configured
  C. The interface name has an invalid character
  D. The interface type is incorrect
  D. The interface type is incorrect

• Question 17:

  Which statement best describes firewall packet processing in an NSX environment?

  A. Packets that require firewall processing are redirected to the nearest ESXi host deployed with a virtual machine based firewall.
  B. Packets that require firewall processing are forwarded to a physical firewall appliance.
  C. Packets that require firewall processing are processed in-line on the local hypervisor.
  D. Packets that require firewall processing are forwarded to the nearest ESXi host with an embedded firewall module.
  C. Packets that require firewall processing are processed in-line on the local hypervisor.

• Question 18:

  After consulting with the network team, it is decided that Transport Zones will be configured with Unicast Replication Mode for a new NSX for vSphere deployment. Which statement is true regarding the function of the VXLAN Tunnel End Points (VTEPs)?

  A. The VTEPs will send unicast frames to the NSX Controllers when the VTEPs do not have a MAC address in the MAC table.
  B. The VTEPs will switch to Multicast Replication Mode for those VTEPs to which multicast path discovery is successful.
  C. The VTEPs will send multicast frames to all other VTEPs in the Transport Zone when the VTEPs do not have a MAC address in the MAC table.
  D. The VTEPs will send unicast frames to all local VTEPs and remote proxies in the Transport Zone when the VTEPs do not have a MAC address in the MAC table.
  D. The VTEPs will send unicast frames to all local VTEPs and remote proxies in the Transport Zone when the VTEPs do not have a MAC address in the MAC table.

• Question 19:

  Which two are valid statements regarding third-party services and NSX? (Choose two.)

  A. Third party services are automatically registered with NSX Manager.
  B. Third party services can either be automatically or manually registered with NSX Manager.
  C. Third party services require the deployment of a virtual appliance.
  D. Third party services may or may not utilize a service virtual appliance.
  B. Third party services can either be automatically or manually registered with NSX Manager.
  D. Third party services may or may not utilize a service virtual appliance.

• Question 20:

  Which VMware NSX for vSphere component can be created on-demand using vCloud Automation Center?

  A. The logical switch
  B. The logical distributed router
  C. The distributed firewall
  D. The NSX Edge Services Gateway
  A. The logical switch