VMware VCP550 Online Practice Questions and Exam Preparation

VMware VCP550 Online Questions & Answers

• Question 21:

  -- Exhibit -

  

  -- Exhibit -The vSphere administrator needs to remove the Production virtual machine port group from an ESXi host. The ESXi host's Networking Configuration tab is shown in the exhibit.

  After disconnecting the Fileserver02 VM, what step does the administrator need to take, assuming that vSwitch1 will still be needed for further configuration?

  A. Remove the Production port group by accessing the properties for the port group.
  B. Remove the Production port group by accessing the properties for vSwitch1.
  C. Remove the Production port group by accessing the properties for the Network.
  D. Remove the Production port group by removing vSwitch1.
  B. Remove the Production port group by accessing the properties for vSwitch1.

• Question 22:

  An administrator is upgrading a vSphere Distributed Switch. The existing switch is version 5.0 and the administrator wants to upgrade to the latest version possible. The environment contains several ESXi 5.1 hosts. Which two options are available to ensure that the upgraded switch will be compatible with these hosts? (Choose two.)

  A. Upgrade the vSphere Distributed Switch to 5.5
  B. Upgrade the ESXi 5.1 hosts to version 5.5, then upgrade the vSphere Distributed Switch to 5.5
  C. Upgrade the vSphere Distributed Switch to 5.1
  D. Upgrade the ESXi host switches to 5.5, then upgrade the vSphere Distributed Switch to 5.5
  B. Upgrade the ESXi 5.1 hosts to version 5.5, then upgrade the vSphere Distributed Switch to 5.5
  C. Upgrade the vSphere Distributed Switch to 5.1

• Question 23:

  The Edit Settings wizard reports a virtual machine is configured as follows: -- Exhibit -

  

  -- Exhibit -Which setting, if NOT configured, will prevent network connectivity?

  A. The network label must be supplied.
  B. The MAC address must be supplied.
  C. The device status must be set to Connected.
  D. The DirectPath I/O status must be Supported.
  A. The network label must be supplied.

• Question 24:

  An administrator is building a new vSphere Standard Switch with two active uplinks. The physical switch ports for these uplinks are placed in an etherchannel. Which load balancing policy should the administrator use to support the etherchannel configuration?

  A. Route based on IP hash
  B. Route based on the originating virtual port
  C. Route based on source MAC hash
  D. Route based on physical NIC load
  A. Route based on IP hash

• Question 25:

  A vSphere administrator is administering a vSphere Distributed Switch port group using the vSphere Web Client. The port group was configured using Static binding, but the number of

  ports must increase as virtual machines are added to the port group.

  Which port allocation setting should the administrator use to achieve this goal?

  A. Elastic
  B. Dynamic
  C. Fixed
  D. Manual
  A. Elastic

• Question 26:

  An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts.

  Which DCUI option should the administrator use to renew the DHCP lease?

  A. Restart Management Network
  B. Restore Network Settings
  C. Test Management Network
  D. Configure Management Network
  A. Restart Management Network

• Question 27:

  To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity. What should the administrator do to meet the requirement?

  A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
  B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
  C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
  D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
  A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10

• Question 28:

  A vSphere administrator manages a three host cluster with 20 VMs. The HA cluster is configured with the Host Failures the Cluster Tolerates admission control policy and all other settings are set to default values. The administrator determines that one of the VMs is not able to power on. After further inspection, it is determined that this VM cannot power on because of a very large CPU reservation.

  Which cluster advanced HA setting can the administrator modify to enable the virtual machine to power on?

  A. Lower das.vmcpumaxmhz attribute value
  B. Higher das.vmcpuminmhz attribute value
  C. Lower das.slotcpuoutmhz attribute value
  D. Higher das.slotcpuinmhz attribute value
  D. Higher das.slotcpuinmhz attribute value

• Question 29:

  To avoid unnecessary planned downtime, what is the minimum version of VMware Tools that, if installed, will decrease the need for virtual machine reboots following VMware Tools upgrades?

  A. 5.5
  B. 5.1
  C. 5.0
  D. 4.1
  B. 5.1

• Question 30:

  While shutting down a vApp for maintenance, a vSphere administrator determines that one of the virtual machines stays powered on. The administrator manually powers off the virtual machine inside the vApp. Which step should the administrator take to prevent the virtual machine from staying powered on in the future?

  A. Change the Shutdown Action for the virtual machine to None
  B. Change the Shutdown Action for the virtual machine to Power Off
  C. Change the Shutdown Action for the virtual machine to Manual
  D. Change the Shutdown Action for the virtual machine to Excluded
  B. Change the Shutdown Action for the virtual machine to Power Off