VMware VCP550 Online Practice Questions and Exam Preparation

VMware VCP550 Online Questions & Answers

• Question 1:

  An administrator is installing ESXi 5.x to a local SAS drive. The installation stops on a purple screen and shows the error:

  The system has found a problem on your machine and cannot continue. Could not populate the filesystem: Admission check failed

  Which action should the administrator take to resolve this issue?

  A. Upgrade the ESXi host to meet the minimum hardware requirement for installation.
  B. Disable the network interface cards (NICs) to ensure that third-party drivers do not interfere with installation.
  C. Enable hardware Virtualization Technology in the ESXi host BIOS.
  D. Disable the Host Bus Adapters (HBA) to ensure the installation targets the local disk.
  A. Upgrade the ESXi host to meet the minimum hardware requirement for installation.

• Question 2:

  An administrator is creating a new VMFS volume and needs to make it available to all hosts within a datacenter using the Web Client. What should the administrator scan for in order to meet this requirement?

  A. New Storage Devices and LUNs
  B. New Storage Devices and VMFS Volumes
  C. New VMFS Volumes and Datastores
  D. New VMFS Volumes and LUNs
  B. New Storage Devices and VMFS Volumes

• Question 3:

  An administrator needs to deploy several virtual machines. Storage contention between the virtual machines should be managed by the VMkernel. Some of the virtual machines will use MSCS and should be highly available across the ESXi

  5.5 hosts.

  Which two storage options meet these requirements? (Choose two.)

  A. iSCSI
  B. NFS
  C. Fibre Channel
  D. vSAN
  A. iSCSI
  C. Fibre Channel

• Question 4:

  A vSphere administrator needs to increase the capacity of an existing Storage Distributed Resource Scheduler (SDRS) datastore cluster. The storage administrator has provisioned two new NFS datastores to be added to the cluster.

  The vSphere administrator receives an error message, preventing the administrator from adding the newly provisioned datastores to the cluster.

  What is the likely reason that the action failed?

  A. There are virtual machines running on the datastores being added to the cluster.
  B. The datastores in the SDRS cluster are VMFS datastores.
  C. The datastores in the existing cluster have hardware acceleration enabled and the new datastores do not.
  D. The SDRS cluster has not been placed into maintenance mode.
  B. The datastores in the SDRS cluster are VMFS datastores.

• Question 5:

  -- Exhibit -

  

  -- Exhibit -The administrator needs to modify the problematic configuration shown in the exhibit to meet the following requirements:

  1. Uplink ports must connect to a 2-port Etherchannel connection. 2. Traffic must pass, even in the event of a port failure. Which two configuration changes should the administrator make? (Choose two.)

  A. Change the Load balancing algorithm to Route based on ip hash
  B. Change the Load balancing algorithm to Route based on physical NIC load
  C. Move Uplink 1 into Active Uplinks and Uplink 2 into Standby Uplinks
  D. Move both uplinks into the Active Uplinks
  A. Change the Load balancing algorithm to Route based on ip hash
  D. Move both uplinks into the Active Uplinks

• Question 6:

  Which statement is true regarding the licensing of vCenter Server?

  A. The license for vCenter Server must be provided at the time of installation.
  B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
  C. Virtual machines can still be powered on if the vCenter Server license expires.
  D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
  C. Virtual machines can still be powered on if the vCenter Server license expires.

• Question 7:

  A vSphere administrator observes a problem with the Virtual SAN Cluster Setting as shown: -- Exhibit -

  

  -- Exhibit -Which action should the administrator take on the vmkernel portgroup on all hosts used by Virtual SAN cluster to resolve this problem?

  A. Select the Virtual SAN traffic option
  B. Increase the MTU value
  C. Change the DNS server address
  D. Increase the Port Speed
  A. Select the Virtual SAN traffic option

• Question 8:

  An administrator needs to create and provision new virtual machines from a master image that can not be edited or powered on. Which type of resource is most appropriate for the administrator to perform the task?

  A. Full Clone
  B. Linked Clone
  C. Template
  D. Snapshot
  C. Template

• Question 9:

  An administrator needs to use guest OS clustering in a vSphere environment that uses a Fibre Channel SAN. The clustering software does NOT have a SCSI target or a SCSI command pass-through requirement.

  Which VMware storage type should the administrator use?

  A. Physical RDM
  B. VMFS
  C. Virtual RDM
  D. NFS
  B. VMFS

• Question 10:

  What is the correct order to install vCenter Server 5.x components?

  A. vCenter Single Sign-On, Inventory Service, vCenter Server
  B. vCenter Server, vCenter Single Sign-On, Inventory Service
  C. vCenter Server, Inventory Service, vCenter Single Sign-On
  D. vCenter Single Sign-On, vCenter Server, Inventory Service
  A. vCenter Single Sign-On, Inventory Service, vCenter Server