VMware VCP5-DCV Online Practice Questions and Exam Preparation

VMware VCP5-DCV Online Questions & Answers

• Question 381:

  When you are configuring the NIC teaming policy for a vSwitch, what happens when the Failback option is set to Yes?

  A. A failed uplink will be left inactive upon recovery until another uplink fails.
  B. The vswitch is notified when a failover event occurs.
  C. The physical switches are notified when a failback event occurs.
  D. A failed uplink is returned to active duty immediately upon recovery.
  D. A failed uplink is returned to active duty immediately upon recovery.

  ---

  Explanation/Reference:

  Select Yes or No to disable or enable failback.

  This option determines how a physical adapter is returned to active duty after recovering from a failure. If failback is set to Yes (default), the adapter is returned to active duty immediately upon recovery, displacing the standby adapter that

  took over its slot, if any. If failback is set to No, a failed adapter is left inactive even after recovery until another currently active adapter fails, requiring its replacement.

• Question 382:

  An administrator has configured a virtual machine using the Emulate IDE mode for the DVD drive. Using the vSphere Client from a remote PC, an administrator wants to connect to a virtual machine and burn a DVD, but is getting error messages in the disk burning application.

  What must the administrator do to fix this issue?

  A. The administrator must use the host DVD drive.
  B. A DVD cannot be burned from within a virtual machine.
  C. The administrator must change the DVD mode to Passthrough IDE.
  D. The administrator must click the Writer checkbox in the DVD settings.
  C. The administrator must change the DVD mode to Passthrough IDE.

  ---

  Explanation/Reference:

  Reference: http://pubs.vmware.com/vsphere-50/index.jsp?topic= % 2Fcom.vmware.vsphere.vm_admin.doc_50%2FGUID-C88BB8D3-63E2-4BFF-80F2- B52C4D7C89BF.html

• Question 383:

  As part of a multisite Single Sign-On (SSO) deployment what two steps are required to ensure that a change to one Single Sign-On instance is propagated to the other instances? (Choose two.)

  A. Schedule a Replication Task on the primary instance
  B. Select the first instance during the installation of subsequent instances
  C. During the installation of each instance choose Linked-Mode
  D. Enable Synchronize to Active Directory on each instance
  A. Schedule a Replication Task on the primary instance
  C. During the installation of each instance choose Linked-Mode

• Question 384:

  An ESXi 5.x host is unable to connect to a vCenter 5.x server.

  Which commands should an administrator use to restart the management agents on the host?

  A. SSH to the host and execute the commands - /etc/init.d/hostd restart and /etc/init.d/vpxa restart
  B. SSH to the host and execute the commands - /etc/init.d/vpxd restart and /etc/init.d/vpxa restart
  C. SSH to the host and execute the commands - /etc/init.d/vmware-hostd restart and /etc/init.d/vmware- vpxa restart
  D. SSH to the host and execute the commands - /etc/init.d/vmware-hostd restart and /etc/init.d/vpxd restart
  A. SSH to the host and execute the commands - /etc/init.d/hostd restart and /etc/init.d/vpxa restart

• Question 385:

  A vSphere Standard Switch has been configured for IP-based load balancing using two uplinks. A new uplink is added to the vSwitch.

  What is the status of the uplink by default?

  A. The uplink is placed in standby mode until it is added to the active NIC team.
  B. The uplink is marked as active but does not participate in the active NIC team until assigned to a port group.
  C. The uplink is marked as active, but cannot be used by the active NIC team until it is added to the existing 802.3ad group on the physical switch.
  D. The uplink is marked as unused until it is added to the active NIC team.
  C. The uplink is marked as active, but cannot be used by the active NIC team until it is added to the existing 802.3ad group on the physical switch.

  ---

  Explanation/Reference:

  The new uplink will be marked as active but it cannot use active NIC team until it is added to an existing 802.3ad group on the physical switch. Reference: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01990371/c01990371.pdf (page 26 onwards)

• Question 386:

  An organization has a cluster of 6 ESXi hosts. Security policy requires that all administrative activity occurs through vCenter Server and not directly on the hosts. Which action should a system administrator take to enforce this policy?

  A. Use the vSphere client to right-click on the cluster and select Enable lockdown mode on the ESXi hosts in the cluster.
  B. Use the vSphere client to navigate to the Security Profile of each ESXi host and enable lockdown mode.
  C. Connect to the DCUI of each ESXi host and navigate the menus to the Troubleshooting Options and enable lockdown mode.
  D. Connect to the ESXi shell on each host and type the command service lockdown start.
  B. Use the vSphere client to navigate to the Security Profile of each ESXi host and enable lockdown mode.

• Question 387:

  -- Exhibit -

  

  -- Exhibit -An ESXi host's networking is configured as shown. The virtual machine named Fileserver01 is unable to ping anything on an external network:

  Which condition would explain this behavior?

  A. The vSwitch1 virtual switch does not have an attached vmnic adapter.
  B. The Fileserver01 virtual machine is not running.
  C. vSwitch0 is configured to reject MAC address spoofing.
  D. vmk0 is using a non-routable IP address.
  D. vmk0 is using a non-routable IP address.

• Question 388:

  The Typical option is selected while running the New Virtual Machine Wizard in the vSphere Client. Which three specific configuration options are included during virtual machine creation? (Choose three.)

  A. Datastore location
  B. Virtual machine version
  C. Number of vCPUs
  D. Storage DRS
  E. Virtual disk size
  A. Datastore location
  C. Number of vCPUs
  E. Virtual disk size

  ---

  Explanation/Reference:

  Reference: http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi- vcenter- server-50-virtual-machine-admin-guide.pdf

• Question 389:

  A vSphere administrator manages a three host cluster with 20 VMs. The HA cluster is configured with the Host Failures the Cluster Tolerates admission control policy and all other settings are set to default values. The administrator determines that one of the VMs is not able to power on. After further inspection, it is determined that this VM cannot power on because of a very large CPU reservation. Which cluster advanced HA setting can the administrator modify to enable the virtual machine to power on?

  A. Lower das.vmcpumaxmhz attribute value
  B. Higher das.vmcpuminmhz attribute value
  C. Lower das.slotcpuoutmhz attribute value
  D. Higher das.slotcpuinmhz attribute value
  D. Higher das.slotcpuinmhz attribute value

• Question 390:

  An administrator must determine which Update Manager procedures can be performed using the vSphere Web Client, and which must be completed using the Windows vSphere client. Which two tasks require the use of the Windows vSphere client? (Choose two.)

  A. Attach and detach baselines to inventory objects
  B. Scan inventory objects for compliance
  C. Create a baseline for an inventory object
  D. Stage a baseline for remediation
  C. Create a baseline for an inventory object
  D. Stage a baseline for remediation