VMware VCP5-DCV Online Practice Questions and Exam Preparation

VMware VCP5-DCV Online Questions & Answers

• Question 401:

  A security audit has revealed that a virtual machine on vSwitch1 is receiving all traffic sent to the virtual switch, violating corporate policy. The vSphere administrator examines the properties for vSwitch1, as shown in the exhibit: -- Exhibit -

  

  -- Exhibit -Which configuration explains why the virtual machine is receiving all traffic sent to vSwitch1?

  A. The Production port group has the Promiscuous Mode policy set to Accept.
  B. vSwitch1 has the Promiscuous Mode policy set to Reject.
  C. The Network Failure Detection policy on the Production port group is set to Link Status plus Beaconing.
  D. The Network Failure Detection policy on vSwitch1 is set to Link Status only.
  A. The Production port group has the Promiscuous Mode policy set to Accept.

• Question 402:

  An administrator removes a virtual machine from a resource pool and places it in the DRS root resource pool. Users report the performance of the application running on the virtual machine has improved. The virtual machine relocation was the only change that occurred. What explains the change in application performance?

  A. The memory, storage, and/or CPU settings of the original resource pool restricted access to resources for the virtual machine.
  B. The configured memory, storage and/or CPU shares on the root resource pool are higher than the original resource pool.
  C. The memory, storage and/or CPU settings on the root resource pool restricted access to resources for the virtual machine
  D. The configured memory storage and/or CPU reservations on the root resource pool are higher than the original resource pool.
  A. The memory, storage, and/or CPU settings of the original resource pool restricted access to resources for the virtual machine.

• Question 403:

  An administrator using vCenter Operations Manager is viewing the health of an ESXi host in the environment. There have NOT been any reported outages or issues with the ESXi host, but the administrator needs to determine if the host is behaving normally. Which minor badge should the administrator investigate to determine this information?

  A. Faults
  B. Anomalies
  C. Stress
  D. Health
  B. Anomalies

• Question 404:

  Which are the correct parameters to specify when adding an iSCSI target to an ESXi 5.x host using the Static Discovery tab?

  A. iSCSI server ip address, port 902
  B. iSCSI server ip address, port 3260
  C. iSCSI server ip address, port 902, iSCSI target name
  D. iSCSI server ip address, port 3260, iSCSI target name
  D. iSCSI server ip address, port 3260, iSCSI target name

  ---

  Explanation/Reference:

  Reference: http://kb.vmware.com/selfservice/microsites/search.do? language=en_USandcmd=displayKCandexternalId=1008083

• Question 405:

  Which options would reduce the load on the VMkernel when connecting to an iSCSI array? (Choose two.)

  A. Use an independent hardware iSCSI adapter
  B. Use a Converged Network Adapter
  C. Enable the software iSCSI adapter
  D. Use a dependent hardware iSCSI adapter
  A. Use an independent hardware iSCSI adapter
  D. Use a dependent hardware iSCSI adapter

  ---

  Explanation/Reference:

  Since independent hardware iSCSI adapter doesn't need a VMkernel port, and it uses all its networking and management interfaces all by itself, it will significantly reduce the load on VMkernel. Similarly, dependent iSCSI adapter use very little resources and hence can reduce the load off VMkernel.

• Question 406:

  Which tool should an administrator use to modify vSphere Data Protection (VDP) backup jobs?

  A. vSphere Web Client
  B. vSphere Client using the VDP plugin
  C. VAMI on the VDP Appliance
  D. vSphere Management Appliance
  A. vSphere Web Client

• Question 407:

  An administrator is considering using NPIV to assign WWNs to virtual machines. Virtual machine portability is a major concern. Why would NPIV be inappropriate for this deployment?

  A. Virtual machines using NPIV must use DirectPath I/O.
  B. Storage vMotion is not supported using NPIV.
  C. vMotion is not supported using NPIV.
  D. Enabling NPIV requires SR-IOV supported hardware.
  B. Storage vMotion is not supported using NPIV.

• Question 408:

  Which types of devices can be connected to a virtual machine during a vMotion migration? (Choose two.)

  A. SCSI pass-through devices connected to the ESXi 5 host.
  B. NFS mounts inside of the guest.
  C. USB pass-through devices connected to the ESXi 5 host.
  D. ISO images connected using the vSphere 5 client.
  B. NFS mounts inside of the guest.
  C. USB pass-through devices connected to the ESXi 5 host.

  ---

  Explanation/Reference:

  Reference: http://pubs.vmware.com/vsphere-4-esxvcenter/topic/com.vmware.vsphere.vmadmin.doc_41/vsp_vm_guide/configuring_virtual_machines/t_ add_a_passthrough_usb_device_to_vm.html

• Question 409:

  An administrator needs to deploy a vSphere solution containing a number of hosts and a vSphere Distributed Switch.

  Which steps should the administrator take to accomplish this?

  A. Create the vSphere Distributed Switch, deploy the ESXi hosts, and then add each host to the switch.
  B. Deploy the ESXi hosts, create an HA/DRS cluster containing the hosts, create the vSphere Distributed Switch, and then add the cluster to the switch.
  C. Create the vSphere Distributed Switch and as each ESXi host is deployed it will be automatically added to the switch.
  D. Deploy the ESXi hosts and then create the vSphere Distributed Switch on the hosts.
  A. Create the vSphere Distributed Switch, deploy the ESXi hosts, and then add each host to the switch.

• Question 410:

  When deploying an OVF template, the resulting virtual disk is created in what file format?

  A. OVF
  B. VMDK
  C. VMX
  D. VSWP
  B. VMDK

  ---

  Explanation/Reference:

  Reference: http://www.vmware.com/technical-resources/virtualization-topics/virtual- appliances/ovf.html