1. Home
  2. VMware
  3. VCP5-DCV

VMware VCP5-DCV Online Practice Questions and Exam Preparation

VCP5-DCV Exam Details

  • Exam Code
    :VCP5-DCV
  • Exam Name
    :VMware Certified Professional 5 - Data Center Virtualization (VCP5-DCV)
  • Certification
    :VMware Certifications
  • Vendor
    :VMware
  • Total Questions
    :571 Q&As
  • Last Updated
    :Dec 21, 2024

VMware VCP5-DCV Online Questions & Answers

  • Question 201:

    Click the Exhibit button.

    An administrator has deployed a two-node cluster with HA and DRS enabled. DRS has been configured for fully automated mode. The management and vMotion interfaces have been configured on separate physical networks. Initial DRS testing on this cluster reveals that virtual machines are not being migrated despite great disparity in resource use between the ESX hosts in the cluster. The exhibit shows the error and the network configuration for one of the hosts. Which task would successfully resolve this problem?

    A. Add a vmnic to the VMkernel port
    B. Configure the DRS Migration Threshold to Aggressive
    C. Connect the network cable to the correct physical network
    D. Migrate vitual machines manually using vMotion

  • Question 202:

    An administrator needs to provide a report that shows how many virtual machines can be added to an existing vSphere environment.

    Which report within vCenter Operations Manager meets this requirement?

    A. Cluster or Host Capacity Inventory Report
    B. Configured Host Capacity Report
    C. Virtual Machine Capacity Overview Report
    D. Virtual Machine Optimization Report

  • Question 203:

    Click the Exhibit button.

    An administrator has been tasked with adding a newly installed uplink to vSwitch1. Based on the exhibit, what is a true statement about this environment?

    A. The server does not have available vSwitches to be assigned to this uplink.
    B. The available uplinks are not compatible with a standard vSwitch.
    C. The host needs a driver installed for the newly installed uplink.
    D. The current uplinks cannot be attached because they are in use by other port groups.

  • Question 204:

    An administrator views the Fault Tolerance pane of the Summary tab of a virtual machine and finds that the current status is Not Protected. What are two vSphere Fault Tolerance states that would cause the virtual machine to not be protected? (Choose two.)

    A. Stopped - Fault Tolerance has been stopped on the secondary virtual machine.
    B. Need Secondary VM - The primary virtual machine is running without a secondary virtual machine and is not protected
    C. Need Primary VM - The secondary virtual machine is running, and a new primary virtual machine cannot be generated.
    D. Disabled - Fault Tolerance is disabled.

  • Question 205:

    An administrator is performing maintenance on a storage array used by an ESXi 5.x host. The administrator wants to disable alarm actions for the host while the maintenance is taking place. What procedure will accomplish this task?

    A. Go to the Alarms tab for each ESXi host in the DRS cluster. Locate storage-related alarms. Right-click and disable each alarm.
    B. Right-click the DRS cluster and select Alarm and Disable Alarm Actions.
    C. Right-click the ESXi host and select Alarm and Disable Alarm Actions.
    D. Go to the Alarms tab for the Datacenter containing the DRS cluster. Locate the storage- related alarms. Right-click and disable each alarm.

  • Question 206:

    -- Exhibit -

    -- Exhibit -

    A vSphere administrator assigns VLAN 3389 to the Production port group on the VCP_DCV_Example vSphere Distributed Switch. After the change, users report a loss of connectivity to their applications.

    Further analysis provides the following data:

    The cluster has not had a ESXi host failure.

    Application functioned normally prior to the change.

    The loss of connectivity occurred immediately following the change.

    Which condition would cause this loss of connectivity?

    A. The physical switch ports used by the vmnics have not been configured with 802.1Q.
    B. Maintenance Mode was initiated on one of the hosts in the cluster. Connectivity will resume after the virtual machines are migrated.
    C. All uplinks were removed from the VCP_DCV_Example switch and added to another virtual switch.
    D. A load balancing setting on the port group conflicts with the load balancing setting of the switch.

  • Question 207:

    An administrator wants to monitor the health status of an ESXi 5.x host. However, when the administrator clicks the Hardware Status tab the following error is displayed.

    This program cannot display the webpage

    What might cause this problem?

    A. The VMware VirtualCenter Management Webservices Service is not started.
    B. The required plug-in is not enabled.
    C. The VMware ESXi Management Webservices Service is not started
    D. The name of the vCenter Server system could not be resolved.

  • Question 208:

    A vSphere administrator needs to place an ESXi host in maintenance mode to replace a hardware component. This host is a member of a Virtual SAN cluster that uses Automatic Mode Disk Groups. Availability of virtual machines running on this host is critical. HA and DRS are enabled on the Virtual SAN Cluster. Otherwise, the Virtual SAN cluster uses default values. Which action should the administrator take to automatically guarantee availability of virtual machines with the fastest migration time?

    A. Select Enter Maintenance Mode and accept the default values
    B. Select Enter Maintenance Mode and select Full Data Migration option
    C. Select Enter Maintenance Mode and select No Data Migration option
    D. Migrate the virtual machines to another host and datastore then select Enter Maintenance Mode

  • Question 209:

    Which two conditions must exist on all hosts in the cluster if Enhanced vMotion Compatibility (EVC) is used? (Choose two.)

    A. The cluster must be enabled for DRS.
    B. All hosts in the cluster must be running ESX/ESXi 3.5 Update 2 or later.
    C. All hosts in the cluster must have hardware virtualization support enabled.
    D. The cluster must be enabled for HA.

  • Question 210:

    What are two requirements for a fully functional vSphere HA cluster? (Choose two.)

    A. vCenter installed or a vCenter Server Virtual Appliance (vCSA) deployed .
    B. Access to local storage for each host in the cluster.
    C. Static IP addresses entered in each hosts file in the cluster.
    D. A minimum of one VMkernel port per host.

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only VMware exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your VCP5-DCV exam preparations and VMware certification application, do not hesitate to visit our Vcedump.com to find your solutions here.