VMware VCP-510 Online Practice Questions and Exam Preparation

VMware VCP-510 Online Questions & Answers

• Question 301:

  A vSphere 5.x environment has an ESXi 5.x host configured to boot from a hardware independent iSCSI adapter. What is the expected outcome if the administrator attempts to disable the iSCSI HBA in the vSphere client?

  A. The adapter will be disabled, but is re-enabled the next time the host boots up.
  B. The adapter will be disabled and the host will not boot the next time the host boots up.
  C. A hardware independent iSCSI adapter cannot be disabled from the vSphere Client.
  D. The adapter will be enabled, but the host will boot into troubleshooting mode the next time the host boots up.
  C. A hardware independent iSCSI adapter cannot be disabled from the vSphere Client.

• Question 302:

  Which options would reduce the load on the VMkernel when connecting to an iSCSI array? (Choose two.)

  A. Use an independent hardware iSCSI adapter
  B. Use a Converged Network Adapter
  C. Enable the software iSCSI adapter
  D. Use a dependent hardware iSCSI adapter
  A. Use an independent hardware iSCSI adapter
  D. Use a dependent hardware iSCSI adapter

• Question 303:

  Which three features are only available in the vSphere Client when using a vSphere Distributed Switch? (Choose three.)

  A. Port Mirroring
  B. PVLAN tagging
  C. Storage I/O Control
  D. Ingress Traffic Shaping
  E. 802.1q VLAN Tagging
  A. Port Mirroring
  B. PVLAN tagging
  D. Ingress Traffic Shaping

• Question 304:

  Windows virtual machines use a page file and Linux virtual machines use a swap partition for virtual memory. When you are determining the appropriate size for these, which file is affected?

  A. The .vmx file
  B. The .vswp file
  C. The service console swap partition
  D. The virtual disk size
  D. The virtual disk size

• Question 305:

  An administrator is setting up vSphere Auto Deploy to deploy 25 ESXi 5.x hosts using the vCenter Server Virtual Appliance (vCSA). What would be considered best practices for Auto Deploy? (Choose three.)

  A. Enable vSphere HA on the cluster.
  B. Protect the vCenter server with Fault Tolerance.
  C. Install the Auto Deploy service on the VCSA.
  D. Include the vmware-fdm VIB in the image profile.
  E. Use PowerCLI to write a rule that assigns a custom image profile to the target hosts.
  A. Enable vSphere HA on the cluster.
  D. Include the vmware-fdm VIB in the image profile.
  E. Use PowerCLI to write a rule that assigns a custom image profile to the target hosts.

• Question 306:

  Where are IP addresses for a vSphere Storage Appliance (VSA) cluster managed?

  A. On each VSA appliance using a web-based portal
  B. On the VSA Manger tab for the cluster hosting VSA
  C. On the VSA Manager appliance using a web-based portal
  D. On the vCenter server installed on a VSA host
  B. On the VSA Manger tab for the cluster hosting VSA

• Question 307:

  How can you verify vStorage APIs for Array Integration (VAAI) is enabled?

  A. "VAAI" listed on the Hard Disk properties page for any VMDK stored on a compliant array
  B. "Hardware Acceleration" listed on the Hard Disk properties page for any VMDK stored on a compliant array
  C. "VAAI" column for any datastore created on a compliant array
  D. "Hardware Acceleration" column for any datastore created on a compliant array
  D. "Hardware Acceleration" column for any datastore created on a compliant array

• Question 308:

  When writes from a virtual machine are delivered to a Fibre Channel storage array, which two actions are taken by the VMkernel? (Choose two)

  A. The modified I/O request is sent from the physical HBA to the device driver.
  B. The file corresponding to the virtual machine is located on the VMFS datastores.
  C. The request for blocks on the virtual disk is mapped to blocks on the appropriate physical device.
  D. The I/O request is converted from binary data form to optical data from.
  B. The file corresponding to the virtual machine is located on the VMFS datastores.
  C. The request for blocks on the virtual disk is mapped to blocks on the appropriate physical device.

• Question 309:

  A storage array containing a VMFS datastore must be taken offline for maintenance. What can be done to avoid virtual machine downtime on VMs running in this datastore?

  A. Clone the virtual machines to a VMFS datastore on a different storage array.
  B. Use Site Recovery Manager to failover the virtual machines on the storage array to the recovery site.
  C. Use vSphere HA to failover the virtual machines to ESX Servers attached to a different storage array.
  D. Use Storage VMotion to migrate the virtual machines to a VMFS datastore on a different storage array.
  D. Use Storage VMotion to migrate the virtual machines to a VMFS datastore on a different storage array.

• Question 310:

  You have 50 virtual machines (VMs) running across five ESXi hosts in a DRS Cluster in a production environment for a number of weeks. Several VMs running on one of the ESXi hosts suddenly blue-screen. What is the most likely cause of the failure?

  A. A patch recently applied to all virtual machines.
  B. A driver recently applied to all virtual machines.
  C. A VMkernel panic on the ESXi host running the failed virtual machines.
  D. A hardware problem on the ESXi host running the failed virtual machines.
  D. A hardware problem on the ESXi host running the failed virtual machines.